What are the engine specifications of the Zotye T300?

1 Answers
ChristianAnn
07/29/25 4:33pm
Engine specifications of the Zotye T300: The 1.5-liter turbocharged engine has a maximum power output of 106kW and a maximum torque of 215Nm. The 1.5-liter naturally aspirated engine has a maximum power output of 82kW and a maximum torque of 143Nm. Here are the relevant details: The Zotye T300 is a compact SUV, equipped with two engines - one is a 1.5-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 144 horsepower and a maximum torque of 215Nm. This engine can reach its maximum power output at 5,600 rpm and its maximum torque between 2,500 and 4,500 rpm. This engine features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block.
Was this review help?
6
5
Share
More Forum Discussions

What's the reason for no sound in Corolla's radio?

There are many reasons why the Corolla radio has no sound, such as weak signal or damaged radio head. The following details the causes and solutions: Weak signal: For most aftermarket car radios, signal amplifiers are not configured. Therefore, if the car owner often encounters the situation where the car radio suddenly stops working, consider installing a signal amplifier. However, when purchasing, be sure to pay attention to whether the amplifier model is suitable for your car, otherwise installation will be ineffective. Damaged radio head: Check if there is any abnormality with the antenna. If not, it is likely due to aging of the radio head, and replacing it with a new one will solve the problem.
16
2
Share

Where is the USB port in the Mercedes-Benz E300?

The glove compartment on the passenger side contains three data cables, one of which has a USB connector. There is also a card reader slot on the main console where you can connect the USB connector. Introduction to USB ports: Most USB ports in vehicles are designed for audio data transmission, so the current for most vehicle interfaces is only 5V/0.5A. If the current does not meet the required standard, it may damage the device. Charging current requirements: The charging current can be higher but not lower, which many car owners may not fully understand. Essentially, if the output current of the car charger is less than the maximum rated input power of the phone, it may cause issues.
10
5
Share

What Causes the Noise Under the Chassis After the Car is Turned Off?

This is primarily due to the sound caused by the cooling of the exhaust pipe's three-way catalytic converter after the engine is turned off, which is a normal phenomenon of thermal expansion and contraction. Below is a related introduction about the chassis: Introduction: The chassis refers to the combination of the transmission system, running system, steering system, and braking system in a car. It supports and installs the car engine and its various components and assemblies, forming the overall shape of the car, bearing the engine's power, and ensuring normal operation. Function: The role of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, and receiving the engine's power to make the car move and ensure normal operation. At the same time, a good chassis can ensure the driver's safety.
3
2
Share

What is the difference between 1.4L and 1.5L?

The differences between 1.4L and 1.5L are as follows: 1. Car power: The 1.4T is turbocharged, providing stronger power than the 1.5L, but it is more expensive and has higher maintenance costs. 2. Car power: The 1.5L has weaker power, and cars equipped with 1.5L generally have poorer acceleration performance, but they are cheaper and have lower maintenance costs. 3. The displacement of the 1.4T is better compared to the 1.5L, but it consumes more engine oil. 4. T is the abbreviation for turbo, meaning turbocharged. L stands for liter, indicating the engine displacement in liters. Engines labeled with L without a T are generally naturally aspirated engines.
17
4
Share

What is the reason for unstable idle speed and stalling in MG HS?

The reasons for unstable idle speed and stalling in MG HS are as follows: Low car battery voltage: Use a multimeter to test the battery voltage. If it is below 10V, replacement is recommended. If it is around 11V, it can be used temporarily, but preparation for replacement should be made. Above 12V is acceptable for use. Carbon deposits: Check if the issue is caused by carbon deposits; if the vehicle has run about 20,000 KM, focus on inspecting and cleaning the throttle. Spark plug problem: Inspect, test, and replace the spark plugs. Fuel supply system: Test and inspect components related to the starting and fuel supply system, such as the starter, fuel pump, and sensors.
9
3
Share

How to Control the Throttle Properly?

When controlling the throttle, use the right heel placed on the floor of the driver's compartment as a pivot point, gently press the ball of the foot on the accelerator pedal, and use the flexion and extension of the ankle joint to press down or release. Notes: 1. Apply force gently when pressing or releasing the accelerator pedal, ensuring a smooth and gradual action. 2. Select the appropriate gear to keep the engine running mostly at medium speed and with moderate throttle opening to save fuel. 3. Releasing the clutch should be closely coordinated with pressing the accelerator, ensuring agile movements. 4. Before stopping the car or turning off the engine, first release the accelerator pedal; avoid revving the engine abruptly in neutral.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.