···
Log in / Register

What are the engine specifications of the Lynk & Co 03?

6Answers
LaValerie
07/29/2025, 08:49:49 AM

The engine specifications of the Lynk & Co 03 are: 1. Equipped with a 1.5TL3 high and low power turbocharged engine and a 2.0TL4 turbocharged engine, with maximum horsepower outputs of 156ps, 180ps, and 190ps respectively. 2. The maximum power outputs are 115kw, 132kw, and 140kw respectively, and the maximum torque outputs are 245nm, 265nm, and 300nm respectively. Here are some related details: The Lynk & Co 03 is a compact car launched by Lynk & Co, with dimensions of 4639mm in length, 1840mm in width, and 1472mm in height, a wheelbase of 2730mm, a front suspension type of MacPherson independent suspension, and a rear suspension type of multi-link independent suspension.

Was this review help?
109
Share
Sienna
08/13/2025, 09:21:34 PM

I've been driving the Lynk & Co 03 for almost a year. This car comes with two engine options: 1.5T and 2.0T. Mine is the 1.5T three-cylinder engine, delivering a maximum horsepower of 180 hp and a peak torque of 265 N·m, making it quite agile from a standstill. The 2.0T version offers 190 hp and 300 N·m of torque, providing even more aggressive acceleration. The most thrilling is the 03+ high-performance variant, where the 2.0T engine pushes out 265 hp and 380 N·m of torque, achieving 0-100 km/h in just 5.9 seconds. All variants are turbocharged, allowing maximum torque to be available at mid-to-low RPMs, making overtaking particularly effortless. In city driving, fuel consumption is around 8L/100km, dropping to 6L/100km on highways, striking a good balance between performance and fuel efficiency.

Was this review help?
15
Share
Expand All
SanWalter
10/09/2025, 02:06:12 AM

I test drove the Lynk & Co 03 a couple of days ago and was deeply impressed by its engine. The entry-level 1.5T three-cylinder delivers 180 horsepower, which is more than sufficient for daily use. I'd highly recommend the 2.0T version though - with 190 horsepower paired with the Aisin 8AT transmission, the power delivery is exceptionally smooth. The key is it uses Volvo's Drive-E series engine technology, featuring dual VVT variable valve timing and center direct injection, resulting in quick throttle response with maximum torque available at just 2000 rpm. The engine bay layout is also very tidy, making maintenance convenient. The high-performance 03+ version is even more impressive, with 265 horsepower that nearly rivals hot hatches, delivering exhilarating acceleration with strong push-back force when driving.

Was this review help?
10
Share
Expand All
AubreeMarie
11/22/2025, 02:21:48 AM

The Lynk & Co 03 offers a diverse engine lineup. The 1.5T three-cylinder delivers 180 horsepower and 265 N·m of torque, prioritizing fuel efficiency. The 2.0T four-cylinder comes in two power variants: the standard version with 190 hp and 300 N·m, while the performance-oriented 03+ model boosts output to 265 hp and 380 N·m. All engines feature turbocharging, achieving peak torque at just 1750 rpm for unbeatable traffic light acceleration. Real-world fuel consumption is impressive, averaging around 7L/100km in combined driving - more economical than some American 2.0T rivals. The lifetime engine warranty policy provides additional peace of mind for drivers.

Was this review help?
8
Share
Expand All
NaomiRose
01/12/2026, 09:09:34 PM

Impressed by the solid engine specs of the Lynk & Co 03. The 1.5T version delivers 180 horsepower, which is more than sufficient for city commuting, and runs smoothly on 92-octane fuel. The base 2.0T model offers 190 horsepower paired with an 8AT transmission, showcasing rare smoothness in its class. The most striking is the tuning of the 03+, with 265 horsepower effortlessly propelling its 1.6-ton body. This engine features an all-aluminum cylinder block, offering lightweight construction and excellent heat dissipation. Combined with a small-inertia turbo, it delivers particularly responsive low-end power. During the test drive, a few full-throttle presses showed the engine remains stable even when revving up to 5,500 RPM, and the exhaust note is thrilling enough.

Was this review help?
4
Share
Expand All
LillianMarie
04/09/2026, 12:48:24 AM

I've studied the Lynk & Co 03's engine extensively. While the 1.5T three-cylinder has faced skepticism, its actual output of 180 horsepower rivals some four-cylinder engines. The standard 2.0T version delivers 190hp/300N·m, outperforming the Civic's 1.5T by 20hp. The real highlight is the 03+ performance version, which directly incorporates Volvo's T5 engine technology - 265hp with full-time AWD. Engage track mode and it delivers a pure performance car experience. This engine won Ward's Top 10 Engines for three consecutive years, featuring cylinder wall coatings and lightweight pistons that reduce friction, making it exceptionally durable during aggressive driving while offering significant tuning potential.

Was this review help?
14
Share
Expand All
More Q&A

What is the tire model of the Ford Focus?

There are three specifications for Ford Focus tires: 205/60R16, 235/40R18, and 215/50R18. In 205/60R16, the first number 205 represents the tire width of 205MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, 16 represents the rim diameter of 16 inches, and the middle letter "R" stands for radial tire. In 235/40R18, the first number 235 represents the tire width of 235MM, 40 indicates the aspect ratio of the tire section is 40%, meaning the section height is 40% of the width, 18 represents the rim diameter of 18 inches, and the middle letter "R" stands for radial tire. In 215/50R18, the first number 215 represents the tire width of 215MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, 18 represents the rim diameter of 18 inches, and the middle letter "R" stands for radial tire. The brand of Ford Focus tires is Goodyear, and the spare tire specification is non-full size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the car frame of the tire to be replaced, ensuring the jack touches the metal part of the car frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the wheel hub, align the tire rim with the wheel bolts, install the lug nuts, tighten the nuts, and the tire replacement is now complete. In addition to the model, the tire is also marked with the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire.
119
Share

What are the causes of intermittent misfire in one cylinder?

Here are the specific reasons for intermittent misfire in one cylinder: Clogged or aged fuel injector: As the vehicle ages, carbon deposits accumulate over time, leading to clogged fuel injectors; fuel injectors subjected to long-term high-pressure gasoline flow can experience severe aging. Issues with spark plugs: Spark plugs are one of the most easily damaged car components, with ordinary copper-core spark plugs having a lifespan of around 30,000 kilometers. In actual usage, even if the spark plugs have not reached their expected lifespan, carbon deposits can still cause engine misfire. Ignition coils and cylinder wires: Damage to these components is the most common cause of engine misfire. If these parts malfunction, the spark plugs cannot ignite properly, resulting in misfire.
107
Share

Do Cycling Shoes Need to Match the Pedals?

Cycling shoes and pedals can generally be paired freely, as long as you avoid using mountain bike shoes with road bike pedals. However, if the brands of the pedals and shoes don't match, there is a possibility they might not fit together. Mountain bike pedals and cycling shoes are equipment designed to assist with riding, creating a "unified rider-bike" state by connecting the cleats on the shoes to the pedals. Below is an introduction to clipless pedals: Categories: Clipless pedals are divided into mountain bike pedals and road bike pedals. Detailed explanation: Road bike pedals and mountain bike pedals correspond to different cleat systems. Road bike cleats include: SPD-SL, LOOK, and Speedplay. Mountain bike cleats include: SPD and "Eggbeater."
120
Share

Can 16-inch rims be replaced with 18-inch rims?

16-inch rims cannot be replaced with 18-inch rims. The relevant explanation is as follows: Reasons why replacement is not allowed: Policies clearly stipulate that non-original size rims are not permitted for replacement. If 16-inch rims are replaced with 18-inch rims without approval from the public security traffic management department, the vehicle management office will not record the modification, and the vehicle will fail the annual inspection. Requirements for permissible changes: The style of the rims can be altered, but the size of the rims cannot be changed. Switching to larger rims will result in higher fuel consumption and reduced comfort. As the tires become thinner, the shock absorption performance will decrease, tire noise will increase, and the vehicle's acceleration and starting power will weaken. However, it is advised not to modify the vehicle without authorization, as it may affect the car's lifespan.
113
Share

Does a Wrong Character in the Driver's License Address Have Any Impact?

Only errors in the name, surname, or number on the driver's license have significant consequences, but an error in the address on the license has minimal impact. According to regulations, during the annual review period, you can bring your ID card and driver's license to the vehicle management office where the license was issued to apply for a replacement procedure. Below is a detailed introduction about automobile driving: Overview: Automobile driving is one of the basic skills that modern individuals need to master. To acquire automobile driving (driving-a-motor-vehicle) skills, one must meet the required age and physical conditions; and undergo training and examinations on road traffic safety laws and regulations, relevant automobile mechanical knowledge, and safe driving practices. Others: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formalized action that must be issued by a specialized authority.
104
Share

Do I Need to Report to the Vehicle Management Office for Installing a Roof Rack?

Installing a roof rack requires reporting to the vehicle management office. The law clearly stipulates that the installation of a roof rack must be registered and reported. Unauthorized changes to the external appearance of a motor vehicle and its registered technical data will result in the traffic management department of the public security authority ordering the restoration of the original condition, along with a warning or a fine of up to 500 yuan. No unit or individual may engage in the following activities: unauthorized alteration of the registered structure of a motor vehicle; assembly of a motor vehicle or unauthorized alteration of its registered structure, construction, or features; modification of the motor vehicle model, engine number, frame number, or vehicle identification number; forgery, alteration, or use of forged motor vehicle registration certificates, license plates, driving licenses, inspection qualification marks, or insurance marks; use of registration certificates, license plates, driving licenses, inspection qualification marks, or insurance marks of other motor vehicles.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.