What are the driving techniques for curve driving?

1 Answers
Aubree
07/29/25 2:34pm
Driving techniques for curve driving: When driving on curves, it is essential to grasp the right timing, control the vehicle's speed properly, and use the clutch and brake to regulate speed. Before entering a curve, try to stay close to the right side of the curve to avoid crossing the line. Below is an introduction to the curve driving test: 1. Test requirements: Curve driving is a key assessment point in the second subject of the driver's test, commonly known as the S-curve. The test requires the vehicle to navigate an S-shaped road of specified width without pressing the edge lines, with smooth and flexible steering. 2. Assessment content and purpose: The test evaluates the driver's ability to maneuver the steering and control the vehicle's movement on curves. The goal is to develop the driver's skill in using steering and mastering the trajectory of the wheels.
Was this review help?
16
0
Share
More Forum Discussions

Where is the trunk switch of the RAV4?

Toyota RAV4's trunk switch is located on the left side of the center console, with a trunk capacity of 1142L. Here is the relevant information: 1. Opening method: Gently press the trunk button to open the trunk lid. Alternatively, you can also use the key to turn the switch. Many car models allow direct trunk unlocking via the key—simply press the trunk unlock button on the key. ③ As long as the key is on your person, you can directly pull the trunk handle to open it. 2. Note: For cars with a trunk lid lock cylinder: If the key is removed when in the horizontal position, the trunk lid will no longer be controlled by the central locking system and will remain permanently locked. When the key is turned back to the vertical lock cylinder position, the trunk lid lock control returns to the central locking system's control range.
8
5
Share

What are the functions of the Hongqi H5 center console?

The Hongqi H5 center console screen features functions such as the Electronic Stability Program (ESP), hazard warning lights, parking camera, driving assistance system, auto hold, and auto start-stop. Below are the specific details of the Hongqi H5: 1. Body dimensions: The Hongqi H5 is a mid-size sedan under the Hongqi brand, with a length of 4945mm, width of 1845mm, height of 1470mm, and a wheelbase of 2875mm. 2. Powertrain configuration: The car is equipped with two engines—a 1.5-liter turbocharged engine and a 1.8-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 169 horsepower and a maximum torque of 258 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head. It is paired with a 7-speed dual-clutch transmission. The 1.8-liter turbocharged engine produces 197 horsepower and a maximum torque of 320 Nm, also equipped with direct fuel injection technology and an aluminum alloy cylinder head. It is matched with a 6-speed automatic transmission. 3. Suspension configuration: The Hongqi H5 uses a MacPherson independent front suspension and a multi-link independent rear suspension.
14
5
Share

Does the 2012 BMW 523 consume engine oil?

BMW 523 does have the phenomenon of consuming engine oil, but oil consumption is also related to driving habits, such as aggressive driving, short-distance driving, stop-and-go traffic, etc., which can affect oil consumption. Other factors include fuel quality, oil quality, driving conditions, and maintenance intervals. The following is a detailed introduction about BMW: 1. Introduction: BMW's history began in 1916. The company was originally an aircraft engine manufacturer headquartered in Munich, Bavaria. 2. Logo: The BMW blue and white logo symbolizes a rotating propeller. However, the current BMW president corrected that people always think the blue and white logo is a propeller, but it should actually represent BMW's headquarters in Munich, Bavaria, Germany. The state flag of Bavaria is blue and white, and BMW's name stands for Bavarian Motor Works. BMW represents Bavaria and the most exquisite engine technology in Germany.
10
2
Share

How many liters of engine oil does the Mercedes-Benz E260 require?

The 1.8T displacement Mercedes-Benz E260 requires approximately 6 liters of engine oil. When adding oil to your Mercedes-Benz E260, it's crucial not to overfill or completely fill the oil reservoir. The oil level should be strictly maintained between the upper and lower marks on the dipstick - neither too much nor too little. Precautions for changing engine oil: Perform the oil change when the engine is warm to ensure maximum drainage of old oil; Add the correct amount of new oil; After adding oil, start the engine and check all components for leaks. Run the engine for 3 minutes to confirm the oil level reaches the normal mark. Engine oil (or engine lubricant) serves multiple functions: lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Steps for changing car engine oil: Lift the vehicle and remove the underbody shield, placing a 10-liter container beneath the drain plug; Loosen the drain plug and use an air gun to blow through the oil filler opening for two minutes; After complete drainage, tighten the drain plug and wipe with a paper towel to check for leaks; Reinstall the underbody shield and lower the vehicle; Use a funnel to add new oil through the filler opening.
16
2
Share

How many liters of engine oil does an Audi A6 2.0T require?

Audi A6 2.0T requires approximately 4.5 liters of engine oil. When adding engine oil to an Audi A6 2.0T, it is crucial not to overfill or completely fill the oil reservoir. The oil level should be strictly maintained between the upper and lower marks on the dipstick, neither too much nor too little. Precautions for changing car engine oil: Perform the oil change when the engine is warm to ensure the old oil is drained as completely as possible; Add the appropriate amount of engine oil; After adding the oil, start the engine and check all components for any leaks. Run the engine for 3 minutes to confirm the oil level reaches the normal mark. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Steps for changing car engine oil: Lift the car and remove the protective plate; Place a container with a capacity of about 10 liters under the oil drain plug; Loosen the drain plug and use an air gun to blow into the oil filler port for two minutes; After draining, tighten the drain plug and wipe it with a tissue to check for leaks; Reinstall the protective plate and lower the car; Use a funnel to add engine oil through the filler port.
1
1
Share

What Are the Three Major Factors Affecting Car Fuel Consumption?

There are three major factors affecting fuel consumption: 1. Rough roads increase fuel consumption: Poor road conditions or uneven surfaces force the vehicle to drive in low gear for extended periods, inevitably increasing fuel usage; 2. Using the trunk as storage increases fuel consumption: Loading the trunk with unnecessary items increases the car's weight. Many overlook that vehicle weight is directly proportional to fuel consumption. Reducing weight by 10% can lower fuel consumption by several percentage points; 3. Incorrect driving habits can double or triple fuel consumption: Poor driving practices have the most significant impact on fuel efficiency. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.