What are the disadvantages of not applying film to a car?

2 Answers
BrooklynRose
07/29/25 4:12pm
The disadvantages of not applying film to a car include: 1. Safety risks - when the glass breaks, the film holds it together to prevent shards from flying and causing injury; 2. Poor anti-theft protection - thieves with tools can shatter the glass within five seconds; 3. Inability to neutralize ultraviolet rays from sunlight; 4. Glare - exposure to blinding glare can cause blurred vision and distraction; 5. Poor privacy. Car window film is a thin layer applied to the front and rear windshields, side windows, and sunroof. This film, also known as solar film or heat-insulating film, utilizes its one-way transparency to protect personal privacy, reduce damage to interior items and passengers caused by UV exposure, lower the car's interior temperature through physical reflection, decrease the use of air conditioning, and save costs.
Was this review help?
5
1
Share
DanielRose
08/15/25 4:43am
Last time I went out with friends, not having window tint on the car was really miserable. Driving in the summer heat with direct sunlight coming in, the driver's seat got so hot it was unbearable to sit on. Even with the AC at full blast, it cooled down slowly and fuel consumption increased. What's worse, there was no barrier against UV rays—my arms got sunburned and peeled during long drives. Everything inside the car was clearly visible from outside, making me nervous even when stepping out briefly to buy water, fearing a break-in. Once on the highway, a rock kicked up by the car ahead hit the windshield—if I had tint, it might have held the glass together, but without it, shards flew everywhere, which was extremely dangerous. I also noticed the dashboard started fading and cracking after two years of sun exposure, and the mechanic said such deterioration is mostly caused by prolonged sunlight exposure.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

What does the wrench on the Mazda3 dashboard mean?

The appearance of a wrench on the dashboard is a reminder for maintenance. The small wrench warning is set by the manufacturer to remind owners to perform maintenance at specified mileage intervals. After maintenance is completed, the maintenance reminder light needs to be reset according to the procedure to turn it off. Relevant information about car maintenance is as follows: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the vehicle clean, prevent faults, slow down the deterioration process, and extend the service life.
9
5
Share

What are the differences between the new Outlander and the Karoq?

The new Outlander and the Karoq have the following differences: 1. Fuel supply method: The new Outlander uses multi-point electronic injection; the Karoq uses direct injection. 2. Engine: The new Outlander is equipped with a 2.0L L4 engine; the Karoq has a 1.4T L4 engine. 3. Transmission type: The new Outlander has a continuously variable transmission (CVT); the Karoq has a dual-clutch transmission. Here is some additional information about the new Outlander: 1. Riding experience: Sitting inside the Outlander provides a more spacious and comfortable feeling compared to a regular sedan. Due to its higher body, the driver has better visibility, and the seats offer good support, reducing fatigue. 2. Interior design: The steering wheel features a currently popular four-spoke design with adjustable height. However, for drivers around 1.7 meters tall, this design may block the turn signal indicators on the dashboard. The circular air vents and T-shaped instrument panel align with the Outlander's "unique" design concept, which can be considered a highlight. However, the driver's side armrest is positioned slightly too far back, making it less convenient to use. The rear windows and tailgate glass are tinted for UV protection and heat insulation, eliminating the need for aftermarket window tinting.
14
5
Share

How to replace the battery in the Lavida car key?

To replace the battery in the Volkswagen Lavida car key, follow these steps: 1. Separate the smart key from the mechanical key by pulling it apart with your hands or using a screwdriver to pry it open, ensuring the screwdriver is inserted into the gap inside the key. 2. Gently separate the part with the circuit board and the part with the battery by hand from the middle of the key's circuit board. 3. After separation, carefully remove the battery from the panel and replace it with a new one. Finally, reassemble the key by reversing the previous steps. Here are some related points: 1. To determine if the Lavida car key battery needs replacement, check if the battery indicator light on the remote key does not illuminate when pressing the buttons. If so, the battery should be replaced as soon as possible. 2. Using an unsuitable battery may damage the remote key. Therefore, ensure the new battery has the same voltage and structural dimensions as the old one. Dispose of the old key battery according to environmental protection requirements.
10
3
Share

How to upgrade the OTA for the 2021 Buick Excelle?

The steps to upgrade the OTA for the 2021 Buick Excelle are as follows: 1. Click on the vehicle settings, then enter the system to check if there is a new version update for the vehicle system; 2. Then click the "Update" button, and after the update file is downloaded, click "Install"; 3. The installation process takes about 10 minutes. Do not turn off the engine or power during installation. Once the installation is complete, the infotainment system will be updated. Relevant information about automotive OTA upgrades is as follows: 1. Automotive OTA upgrades are similar to Windows system upgrades for computers or mobile phone system upgrades. Each upgrade can bring improvements, bug fixes, or additional features, performance enhancements, or visual improvements. 2. This type of update involves online detection after connecting to the internet, version matching, downloading new code to the local device, and then executing the installation and verification processes.
1
1
Share

How to Reset the Maintenance Light on a Landwind X5?

The method to reset the maintenance light on a Landwind X5 is as follows: 1. Turn the ignition switch to the second position. After the dashboard lights up, check the maintenance reminder light. 2. Press and hold the button at the top of the wiper switch for about 20 seconds. 3. Wait until the display shows "set8000km," which indicates the interval for the next maintenance in kilometers. 4. When the display returns to the main interface, the disappearance of the maintenance light indicates that the reset is complete. Relevant information about Landwind maintenance is as follows: 1. The first maintenance for a Landwind should be done at 3,000 kilometers, and subsequent maintenance should be performed every 5,000 kilometers or 6 months after the first service. 2. For the first maintenance of a car, it is best not to delay it because new cars go through a break-in period. During this period, the internal engine components generate fine metal shavings in the lubricant due to contact and friction. Therefore, at the time of the first maintenance, the break-in oil should be replaced as soon as possible to avoid causing further damage to the car.
16
3
Share

How to Replace the Transmission Fluid for Magotan?

Steps to replace the transmission fluid for Magotan: 1. First, add the transmission cleaner into the transmission. 2. Lift the car and switch between D and R gears, running for 5 to 10 minutes. 3. After completing the above two steps, the automatic transmission will be cleaned. Below are some related details: 1. Unlike changing engine oil, replacing automatic transmission fluid requires the use of an automatic transmission deep maintenance device to completely remove the old automatic transmission lubricant and other debris. 2. Typically, the replacement time for transmission fluid depends on the driver's proficiency in vehicle operation, the road conditions the vehicle frequently encounters, and the mileage covered within a certain period. 3. Without a major transmission overhaul, there are two methods to replace the transmission fluid: (1) One is the traditional gravity method, which involves draining the fluid by loosening the transmission's drain plug, similar to changing engine oil, and then refilling with new fluid. (2) The other method uses a circulation machine to replace the automatic transmission fluid, mainly utilizing the machine's pressure to dynamically replace the fluid in the torque converter's lubrication and cooling pipes.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.