What are the dimensions of the Wuling Hongguang's trunk?

1 Answers
DelJohnny
07/29/25 3:39am
2100mm/1400mm/1310mm are the dimensions of the Wuling Hongguang's trunk. The luggage space volume can reach 1750L after simply flipping and folding the rear seats; after removing the rear seats and folding the middle row seats, the volume can be expanded to 3050L. How to open the Wuling Hongguang's trunk: Press the unlock button on the handle inside the driver's door to open the trunk; the entire car must be unlocked when parked and turned off, or when the car is locked, press the trunk unlock button on the remote control for more than 3 seconds to open the trunk separately. In addition to general cargo loading, the Wuling Hongguang's trunk has several other major functions: When driving long distances, the owner may store some water in the car, and the built-in hooks in the trunk can be used for this purpose. Alternatively, if the owner purchases aquatic products, these hooks can be used to hang the products, preventing water from spilling into the trunk. If fragile items or items that need to be secured are placed in the car, the trunk's elastic net can be used to fix these items. In case of an emergency where someone is trapped inside the car, the trunk's emergency release loop can be used to open the trunk and escape.
Was this review help?
13
5
Share
More Forum Discussions

What are the causes of steering deviation?

The causes of steering deviation are: 1. Inconsistent braking force between the two wheels of the car, especially the wheels on both sides of the steering axle; 2. Incoordination between the suspension guide rod and the steering linkage during braking; 3. Improper loading on both sides of the vehicle; 4. Inconsistent road adhesion on both sides. The solutions for steering deviation are: 1. Replace the suspension springs—if the vehicle leans to the left, slightly adjust the steering to the right; if the vehicle leans to the right, slightly adjust the steering to the left; 2. Replace or reposition the tires; 3. If the vehicle leans to the left, slightly adjust the steering to the right; if the vehicle leans to the right, slightly adjust the steering to the left.
15
5
Share

What does a triangle with an exclamation mark inside mean?

A triangle with an exclamation mark inside indicates that the vehicle's general fault warning light is on. Common faults include: overheating of the dry dual-clutch transmission, intervention or malfunction of the fuel cutoff system, parking sensor failure, exterior bulb failure, engine oil pressure sensor failure, and traction control system warning or malfunction. Solutions for the general fault warning light include: 1. Check if the engine oil pressure sensor is malfunctioning; 2. Check if the traction control system is malfunctioning; 3. Check if the fuel cutoff system is malfunctioning; 4. Check if the dry dual-clutch transmission is overheating. An exclamation mark in the car indicates that the vehicle has a fault or abnormality, which may affect driving safety and damage the vehicle, requiring inspection and repair.
6
2
Share

Where is the rearview mirror heating switch?

The rearview mirror heating switch is located on the center console buttons. Press the corresponding button to activate the heating function. The purpose of rearview mirror heating is to warm the mirror surface, keeping the rearview mirror clear and ensuring driving safety. The principle of rearview mirror heating: Electric heating elements or heating films are installed inside the mirrors of both side rearview mirrors. When the rearview mirror heating function is activated, these heating elements will quickly warm up to 35-60 degrees Celsius within minutes, effectively defogging and defrosting the mirrors. The function of rearview mirrors: To reflect conditions behind, beside, and below the vehicle, allowing the driver to indirectly observe these areas, expanding the driver's field of vision, and enhancing safety during reversing and driving.
17
0
Share

What is the engine of the Honda XR-V?

The engine of the Honda XR-V is: a 1.5L naturally aspirated engine and a 1.5T turbocharged engine. The engine consists of: a valve train, a crankshaft connecting rod mechanism, an ignition system, a cooling system, a lubrication system, and a supply system. Taking the 2021 Honda XR-V as an example, it is a compact SUV with body dimensions of: length 4328mm, width 1772mm, height 1610mm, and a wheelbase of 2610mm. The 2021 Honda XR-V is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 131PS, a maximum torque of 155Nm, a maximum power of 96kW, and is paired with a 6-speed manual transmission.
8
4
Share

How to use the S gear in Corolla Hybrid?

The method to use the S gear in Corolla Hybrid is: simply press and hold the lock button to shift into the S gear, and the steering wheel is equipped with paddle shifters, allowing manual switching between 6 gears when in S gear. Taking the 2020 Corolla Hybrid as an example, it belongs to the compact car category with body dimensions of 4635mm in length, 1775mm in width, 1470mm in height, and a wheelbase of 2700mm. The 2020 Corolla Hybrid features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum power of 73kW, and a maximum torque of 142Nm, paired with an electronic continuously variable transmission.
5
1
Share

How to Downshift in a Manual Transmission?

Manual transmission downshifting method is: know the position of each gear, press the clutch pedal to the floor, and shift the gear lever to the desired gear. The correct method for shifting gears in a manual transmission is: 1. Before shifting, observe the engine speed of the car, shift when the speed is between 2000 and 2500 rpm, so that there will be no lack of acceleration, jerking, or sluggish throttle after shifting; 2. Press the clutch pedal to the floor, release the throttle at the same time, and shift the gear lever into the corresponding gear; 3. After completing the shift, lift the clutch to the semi-engaged state, wait until the car's power output and power transmission device are smoothly connected, lightly press the throttle to give gas, and then slowly release the clutch.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.