···
Log in / Register

What are the dimensions of the Tayron's trunk?

4 Answers
LondynLynn
07/30/25 2:30am

Tayron's trunk dimensions are 900mm in depth, 1000mm in width, and 740mm in height. Trunk design: The Volkswagen Tayron's trunk is relatively flat overall, with minimal height difference between the trunk floor and the outer edge, making it convenient for daily luggage handling. The ground clearance when the tailgate is opened is 1840mm, and the lower edge of the opening has a ground clearance of 760mm. It also features an electric tailgate design for effortless use. When the rear seats are slid all the way forward, the minimum trunk depth expands from the original 900mm to 1100mm. Overall vehicle dimensions: The Volkswagen Tayron is a German SUV positioned in the premium market, featuring a 5-door, 5-seat configuration. Its body dimensions are 4589×1860×1660mm, with a wheelbase of 2731mm.

Was this review help?
17
1
Share
LeLondon
08/15/25 8:40am

I remember when I first bought the Tayron, the trunk space was my biggest concern. Official data shows a standard capacity of about 506 liters, which is enough to easily fit a stroller, several cases of mineral water, or a few large suitcases. On regular family outings, there's still room left after placing a large backpack and some daily necessities. Even better, the rear seats can be fully folded down, increasing the capacity to around 1,590 liters. Last year when I moved, I managed to fit in chairs, a table, and a small cabinet—super practical. The height is approximately 70 cm, and the width is 110 cm, with a well-thought-out design that makes loading effortless. Compared to older models or some competitors, the Tayron's trunk excels in both size and usability, making it particularly suitable for family daily use and short trips.

Was this review help?
20
5
Share
Expand All
StRose
10/21/25 6:37am

As someone who frequently goes shopping at malls, the size of the trunk directly impacts convenience. The Tayron boasts a nominal trunk capacity of 506 liters. I've tested it multiple times by loading items, and even after filling it with a pile of online shopping packages, there's still room to spare. The height is just right at my waist level, so I don't need to tiptoe or bend over to place my cosmetic bags or several bags of fresh groceries. When the rear seats are folded down, the space expands to approximately 1,590 liters—perfect for fitting two folding chairs and a large cooler during picnics with friends. The overall opening is wide, and the design is straightforward without unnecessary complications. It's more user-friendly than other SUVs in its class, making shopping hassle-free without having to compromise on what to take.

Was this review help?
16
1
Share
Expand All
Prim
12/04/25 7:05am

Paying attention to automotive details, trunk size is a key metric. The standard luggage compartment of the Tayron offers approximately 506 liters, with a depth of nearly 1 meter and a width of 1.1 meters—reliable data from actual measurements. When the rear seats are folded down, the capacity expands to 1,590 liters, ensuring efficient space utilization without waste. The height, just over 70 centimeters, facilitates easy loading and unloading of bulky items like bicycles or packages. Compared to other SUVs, its clearly optimized parameters highlight practicality in dimensions, making daily cargo handling effortless without the need for additional tools.

Was this review help?
5
3
Share
Expand All
More Forum Discussions

How to Remove the Cigarette Lighter?

Car cigarette lighters can pop out with a single press. If not heated, they can be directly removed. After removal, they can be used for lighting cigarettes or the socket can be utilized for chargers or other devices. Below is relevant information about cigarette lighters: 1. Using the cigarette lighter: Be cautious when removing the lighter if it's heating. If slightly heated, you can press it to pop out. When fully heated, it will automatically pop out slightly and stop heating, allowing direct removal. When handling the lighter, hold the top cover to avoid burning yourself on the lower part. 2. Avoid leaving the socket empty: After removing the cigarette lighter, it's best not to leave the socket empty. You can either reinsert the lighter or place other charging devices there, as the socket contains positive and negative terminals. Avoid dropping objects inside as they may be hard to remove, and conductive items could cause short circuits. Many people use cigarette lighters as chargers, so ensure you use high-quality ones, pay attention to current specifications, and prevent electric leakage or charging failures.
5
4
Share

Is the second year the time for annual inspection of a new car?

According to regulations, a new car must undergo an annual inspection in the second year. The normal annual inspection process involves taking the vehicle to a testing station for checks (lights, tires, exhaust emissions, etc.), and then obtaining the inspection label after the vehicle passes the inspection. Due to the "6-year exemption policy," the vehicle inspection part is waived, and you can directly apply for the inspection label. The relevant regulations on motor vehicle annual inspections are as follows: 1. Passenger vehicles for operational use must be inspected once a year within 5 years; after 5 years, once every 6 months; 2. Trucks and large or medium-sized non-operational passenger vehicles must be inspected once a year within 10 years; after 10 years, once every 6 months; 3. Small and micro non-operational passenger vehicles must be inspected once every 2 years within 6 years; starting from November 20, 2020, for vehicles over 6 years but under 10 years, the inspection cycle has been relaxed from once a year to once every two years, meaning private cars only need to undergo on-site inspections twice within 10 years, specifically in the 6th and 8th years.
6
2
Share

In which year was China III implemented?

China III vehicle emission standards were officially implemented on July 1, 2008, marking the "starting time" of China III. On July 1, 2013, China IV standards came into effect, prohibiting the registration of China III vehicles. To stably meet China III emission standards, vehicles must be equipped with technical measures that ensure pollutant emissions comply with China III standards, while using fuel that meets Euro III standards. Below is relevant information about China III vehicles: 1. The so-called China III standard refers to China's third-stage vehicle emission standard; 2. China's third-stage emission standard is equivalent to the Euro III emission standard, meaning the content of tailpipe pollutants is equivalent to Euro III levels, with the difference being that new vehicles must be equipped with an OBD (On-Board Diagnostics) system; 3. The characteristics of the OBD system include increased detection points and detection systems, with oxygen sensors installed at both the inlet and outlet of the three-way catalytic converter. Compliance is fully ensured through real-time monitoring of vehicle emissions, guaranteeing stricter enforcement of Euro III emission standards.
1
4
Share

Is It Necessary to Use Seat Covers on Car Leather Seats?

It is unnecessary to use seat covers on car leather seats. Here are the reasons why seat covers are not needed for car leather seats: 1. Easy to clean: Many car owners use seat covers to prolong the lifespan of leather seats. With proper maintenance during daily use, leather seats can last 5-8 years. Cleaning leather seats is simple—ordinary dust and stains can be removed by gently wiping with a clean cloth. 2. Safety concerns: From a safety perspective, using seat covers on leather seats is not recommended. Seat covers can interfere with the deployment of side airbags, as airbags are not designed to penetrate an additional layer of seat covers. In emergency situations, the effectiveness of airbags needing to penetrate an extra layer of seat covers is uncertain. 3. Poor breathability: A drawback of leather seats is their lack of breathability, which is further exacerbated by using seat covers. If car owners find the seats uncomfortably cold in winter and hot in summer, they can opt for seat heating and ventilation features when purchasing the car, which enhance comfort and improve the car's cost-effectiveness.
9
2
Share

What is the fuel consumption of the 2020 Haval H9?

2020 Haval H9 actual fuel consumption is around 14L-15L/100km. The fuel consumption of a car varies slightly depending on each person's driving habits and skills. Steadier driving habits result in lower fuel consumption, while aggressive driving behaviors such as frequent acceleration and overtaking at high RPM will appropriately increase fuel consumption. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance will lead to increased fan speed and lower temperature settings to achieve a cooling effect. 2. Frequent hard braking: Frequent hard braking is a primary reason for persistently high car fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement vehicles: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
12
3
Share

How to Clean Cement Stuck on a Car?

Cement stuck on a car can be cleaned using the following methods: 1. If it's been less than 12 hours: First, wet and soak the area with water, then use car wash soap and a towel to gently clean it. 2. If it's been more than 12 hours: By this time, the cement will have hardened. You can purchase some acidic solution from a pharmacy, dip a brush in it, and apply it to the cement. The cement will dissolve in the acidic liquid, and then you can rinse it off with water. 3. Using gasoline: Pour gasoline onto the cement, wait for it to soften slightly, and then remove the cement by hand (suitable for large areas). 4. Using a hairdryer: Heat the area with the cement using a hairdryer. The difference in thermal expansion between cement and plastic will usually cause the cement to fall off automatically. 5. Using white vinegar: Spray white vinegar onto the cement using a spray bottle, wait for 3-5 minutes, and then gently scrape it off with a hard card. The cement will come off in chunks. Afterward, wash the area where the vinegar was sprayed with car wash soap to ensure no residue remains.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.