What are the dimensions of the Tacqua?

2 Answers
DeTessa
07/29/25 2:37am
The length, width, and height of the Tacqua are 4194mm, 1760mm, and 1601mm respectively, with a wheelbase of 2651mm. Here are the relevant details: 1. The Tacqua is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.4-liter turbocharged engine. 2. The 1.4-liter turbocharged engine delivers 150 horsepower and a maximum torque of 250 Nm. This engine can output maximum power at 5000 to 6000 rpm and maximum torque at 1750 to 3000 rpm. It features direct fuel injection technology and uses an aluminum cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 3. The 1.5-liter naturally aspirated engine produces 113 horsepower and a maximum torque of 145 Nm. The maximum power is achieved at 6000 rpm, and the maximum torque is achieved at 3900 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.
Was this review help?
14
1
Share
Bustamante
08/12/25 6:34am
The exact dimensions of the Tacqua are: length 4318mm, width 1819mm, and height 1582mm. Among compact SUVs, these measurements are neither too large nor too small, making it quite agile to drive. I've driven my friend's Tacqua a few times and found it easy to park in the city because it's shorter than those bulky SUVs, yet the interior space is cleverly designed—the back seat can comfortably accommodate three adults without feeling cramped. If you frequently navigate narrow roads or older residential areas, its width is just right, minimizing the risk of scraping the sides. The height is also reasonable, making entry and exit effortless, especially for those who aren't very tall. Overall, these dimensions are the result of the manufacturer's optimization for driving safety and comfort, avoiding issues like increased wind resistance from an overly wide or tall body. You can verify these specs by checking the manual or the official website.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

What is the charging current of new energy vehicles?

Charging current is approximately 15A, which is called conventional charging (ordinary charging). Conventional battery charging methods all use small current constant voltage or constant current charging, generally taking 5 to 8 hours, or even as long as 10 to 20 hours. Fast charging, also known as emergency charging, provides short-term charging service for electric vehicles within 20 minutes to 2 hours of parking with relatively large current, generally with a charging current of 150~400A. The battery is the only energy source for pure electric vehicles. In addition to supplying the electrical energy required for driving, it also provides the working power for various auxiliary devices on the vehicle.
12
1
Share

What is the difference between Transit 3000w and 3000wp?

The difference between Transit 3000w and 3000wp lies in price and performance. Here is an introduction about the motor: Introduction: A motor refers to an electromagnetic device that achieves electrical energy conversion or transmission based on the law of electromagnetic induction. Common faults: In household appliances such as electric fans, refrigerators, washing machines, range hoods, and vacuum cleaners, the working power is generally provided by single-phase AC motors. These motors have a relatively simple structure, so some common faults can be repaired under amateur conditions. The motor does not start after being powered on, the motor runs slowly and weakly, the motor casing is electrified, the temperature rise intensifies during motor operation, the motor runs with loud noise, and the body overheats.
12
2
Share

Is it necessary to replace the brake steel hose?

It is necessary to replace the brake steel hose. Here is an introduction to the brake steel hose: Introduction: Although the inner part of the brake steel hose is still made of rubber material, its outer part is wrapped with a metal braided mesh, hence the name brake steel hose. Features: The brake steel hose is constructed with a rubber tube covered by high-strength steel wire, and an additional anti-wear layer on the outermost part, providing stronger resistance to expansion. Generally, the original rubber hose may expand slightly when the brake is pressed, weakening the initial brake response. Replacing it with a steel hose can improve these phenomena. After installation, it is essential to turn the steering wheel to both extreme positions to ensure it does not scrape or interfere with other components, guaranteeing that the brake responds accurately to the amount of pressure applied.
17
2
Share

Where is the radio fuse located in the Peugeot 207?

Behind the radio. Below is relevant information about the Dongfeng Peugeot 207: 1. Models: The Dongfeng Peugeot 207 comes in sedan and hatchback versions, both equipped with either a 16-valve 1.6L or 1.4L inline 4-cylinder gasoline engine. The 1.4L version is only available with a manual transmission, while the 1.6L version offers both manual and automatic transmissions. 2. Exterior: The front fascia of the Peugeot 207 incorporates a significant amount of the brand's family-style design, reflecting PSA's artistic aesthetics. 3. Interior: The interior design of the Peugeot 207 emphasizes a sporty style, available in both light and dark color schemes. Chrome trim accents are applied to the air vents and gear shift lever, while aluminum pedals enhance the driving excitement.
20
3
Share

What are the causes of transmission failure in the Outlander?

Outlander transmission failure reasons are as follows: 1. Transmission computer or electronic component failure. 2. Transmission oil contains impurities or is severely insufficient. 3. Internal transmission component damage. Below is more information about transmissions: 1. Manual transmission: The shift clutch is a wet multi-plate clutch. When hydraulic pressure presses the piston to compress the driving and driven plates, the clutch engages; when working fluid is discharged from the piston cylinder, the return spring causes the piston to retract, disengaging the clutch. 2. Automatic transmission: After the engine starts, the crankshaft drives the pump impeller to rotate via the flywheel. The centrifugal force generated by rotation causes the working fluid between the impeller blades to be thrown from the inner edge to the outer edge.
4
3
Share

What is EH oil?

Introduction to EH oil is as follows: 1. Overview of EH oil: Also known as fire-resistant oil, it is composed of phosphate esters, appearing transparent, uniform, slightly light yellow in color, without sediment, with low volatility, good anti-wear properties, excellent stability, and physically stable. 2. Function of EH oil: It supplies power oil to the main steam valve and governor valve of the steam turbine, enabling them to operate quickly, reliably, and sensitively to protect the safety of the steam turbine. 3. The EH oil system is divided into three main parts according to its function: the EH oil supply system, the actuator part, and the emergency trip part. The function of the EH oil supply system is to provide high-pressure fire-resistant oil, which drives various actuators while maintaining the normal physical, chemical, and operational characteristics of the hydraulic oil. This fire-resistant oil is a triaryl phosphate ester, possessing excellent fire resistance and liquid stability.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.