What are the dimensions of the Octavia?

1 Answers
BradleyRose
07/30/25 1:45am
The dimensions of the Octavia are 4675mm in length, 1814mm in width, and 1460mm in height, with a wheelbase of 2686mm. As the first sedan under the Shanghai Volkswagen Skoda brand, the Octavia is an advanced model synchronized with Europe and has undergone extensive localization improvements tailored to the Chinese market. The 1.8TSI direct-injection gasoline engine equipped in the Skoda Octavia is part of the Volkswagen Group's EA888 engine series. It marks the first use of the 1.8TSI direct-injection gasoline engine in China and also represents its debut in Skoda's global product lineup. Thanks to the combination of advanced direct fuel injection technology and turbocharging, this 1.8TSI engine delivers outstanding dynamic performance in the Skoda Octavia.
Was this review help?
6
5
Share
More Forum Discussions

What should you pay attention to when buying a used forklift?

Here are the things to pay attention to when buying a used forklift: Observe the gap between the mast of the forklift: First, pay attention to the observation. Stand directly in front of the used forklift and carefully check if the gap between the upper and lower parts of the mast is consistent. If they are not the same, it proves that the forklift has been overloaded for a long time or has been involved in an accident. Check the steering system: Squat down and inspect the steering system at the rear of the used forklift to see if it matches the description provided by the seller. There are two types of steering systems: mechanical and hydraulic. Hydraulic steering is further divided into full hydraulic and mechanical-hydraulic hybrid. Full hydraulic is commonly known as the horizontal cylinder, while mechanical is referred to as the triple plate. Additionally, check all the connecting parts of the used forklift for significant gaps. If the gaps are large, it indicates high usage of the forklift, and there may be substantial repair costs after purchase. Listen to the engine sound: Start the used forklift and listen for any obvious tapping sounds from the engine. Check if the engine runs smoothly. After revving the engine a few times, release the throttle and observe if the engine responds promptly.
20
5
Share

Detailed Explanation of Traffic Signal Lights

Here is a detailed explanation of traffic signal lights: Green light signal: The green light is a permission-to-proceed signal. According to the "Regulations for the Implementation of the Road Traffic Safety Law," when the green light is on, vehicles and pedestrians are allowed to proceed. However, turning vehicles must not hinder the passage of straight-moving vehicles and pedestrians. Red light signal: The red light is an absolute prohibition signal. When the red light is on, vehicles are prohibited from proceeding. Right-turning vehicles may proceed if they do not hinder the passage of other vehicles and pedestrians. The red light is a mandatory stop signal. When encountering this signal, prohibited vehicles must stop behind the stop line, and prohibited pedestrians must wait at the sidewalk. While waiting, motor vehicles must not turn off their engines, open doors, or have drivers leave their vehicles. Bicycles making left turns must not detour around the intersection, and those going straight must not use right turns to detour. Yellow light signal: When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. The yellow light signal's meaning is between the green and red lights, having both prohibitive and permissive aspects. When the yellow light is on, it warns drivers and pedestrians that the passage time is ending and will soon switch to red. Vehicles should stop behind the stop line, and pedestrians should not enter the crosswalk. However, if a vehicle is too close to stop safely and crosses the stop line, it may continue. Pedestrians already in the crosswalk should assess oncoming traffic and either cross quickly, remain still, or retreat. Flashing warning light: This is a continuously flashing yellow light that alerts vehicles and pedestrians to proceed with caution after confirming safety. This light does not control right-of-way. Some are suspended above intersections, while others are used at night when regular traffic signals are off, flashing to remind vehicles and pedestrians to proceed carefully through the intersection. At intersections with flashing warning lights, vehicles and pedestrians must follow the principle of ensuring safety and comply with the rules for uncontrolled intersections. Directional signal light: Directional signal lights are specialized indicators for guiding the direction of motor vehicles. Different arrow directions indicate whether vehicles should go straight, turn left, or turn right. They consist of red, yellow, and green arrow patterns.
19
3
Share

Can mobile phones be charged on bullet trains?

Mobile phones can be charged on bullet trains. There are charging ports under every seat on bullet trains. If your phone runs out of battery and you happen to have a charger with you, you can plug in the charger to recharge your phone. Moreover, the charging service is free of charge, with no additional fees. Below are some precautions to take when charging your car: Turn off the headlights: With the increasing number of private charging stations, which are usually installed in underground parking lots, it is essential to set the headlights to AUTO or turn them off completely while charging. Additionally, since electric vehicles do not have an engine idle, it is crucial to check whether the vehicle's power is turned off before leaving. Generally, the headlights and low-power electrical devices in new energy vehicles are powered by the vehicle's battery. If left on for extended periods, the battery can easily drain, and even if the main battery is fully charged, the vehicle's battery may still be depleted, affecting the car's ability to start. Avoid using the air conditioning and in-car devices: Most car owners tend to wait inside the vehicle while charging their electric cars. During hot summers or cold winters, owners may be tempted to turn on the air conditioning. Although it is possible to use the air conditioning while charging, it is advisable to avoid doing so if possible. Using the air conditioning while charging can reduce the lifespan of the battery pack.
2
1
Share

How long is the validity period of Shenzhen car quota?

According to Article 48 of the "Detailed Rules for the Management of Small Passenger Car Incremental Regulation in Shenzhen": The quota is valid for 6 months. Individuals or organizations should use the quota within its validity period. Unused quotas after the deadline will be deemed abandoned. For quotas obtained through lottery, if not used by the expiration date, the applicant will be prohibited from applying for new quotas for two years starting from the day after the expiration date. Here are some additional details: Update quotas cannot be extended: Whether transfer procedures can be processed on the expiration day depends on the vehicle management office's appointment system - please consult them directly. Quotas are unrelated to license plates: According to Article 30 of the rules, individuals or organizations needing to replace vehicles must apply for update quotas within 6 months after completing transfer registration, cancellation registration, or moving the vehicle out of the city.
16
5
Share

Will Insurance Cover a Car Washed Away by Rain?

Insurance companies will compensate for a car washed away by rain, provided that the user has purchased vehicle damage insurance. Only vehicle damage insurance covers compensation for a car being washed away by water. According to the coverage scope of vehicle damage insurance, losses to the insured vehicle caused by lightning strikes, hailstorms, floods, heavy rain, tsunamis, and similar events are covered by the insurer. After a car is washed away by rain, the policyholder should immediately report the incident to the insurance company. If the car cannot be found, the policyholder must obtain a relevant certificate from the local public security authority and complete the vehicle deregistration procedures at the vehicle management office before the insurance company will process the compensation. According to the "Motor Vehicle Registration Regulations," in cases where a motor vehicle is lost due to a natural disaster, a certificate proving the loss must be issued by a government department at the township level or above in the area where the disaster occurred. Additionally, if a motor vehicle is lost due to a disaster, the owner must apply for deregistration at the vehicle management office where the vehicle was registered. The application requires filling out a form and submitting the vehicle registration certificate, vehicle license, the owner's identification, and the loss certificate.
11
2
Share

Is Subject 2 Difficult?

Subject 2 is not difficult. In Subject 2, if you accurately identify the reference points, use the clutch properly, and perform normally during the test, you can generally pass. In summary, during Subject 2, it's important to drive as slowly as possible—only by going slow can you make adjustments. If the speed is too fast, there won't be enough time to adjust. Below are some key points to note for the Subject 2 test: Fasten your seatbelt: Once you get in the car, fasten your seatbelt immediately. Make sure not to buckle it incorrectly or fasten it to the passenger seat, as the system will directly disqualify you. Do not unfasten the seatbelt at any point during the test. Adjust the seat and mirrors: After getting in the car, adjust the seat, mirrors, fasten the seatbelt, turn on the left turn signal, shift into first gear, and release the handbrake. These six steps are essential. Ensure all preparations are complete before starting. No stopping during the test: There is no time limit for reversing into the parking space, but you must not stop during the process. If the wheels remain stationary for 3 seconds, the system will judge it as stopping midway. Therefore, controlling the speed is crucial. The time limit for hill start is 30 seconds: The hill start must be completed within 30 seconds. The system will give a voice prompt every 10 seconds, and exceeding 30 seconds will result in disqualification.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.