What are the dimensions for reverse parking in a driving practice area?
2 Answers
The standard dimensions for the garage in reverse parking are as follows: The garage is 5.25 meters long and 2.3 meters wide. The total length of the road is 15.9 meters, with a single side length of 6.8 meters and a width of 5.8 meters. Evaluation criteria for reverse parking: Failing to follow the prescribed route or sequence results in disqualification; the vehicle body crossing the line results in disqualification; failing to enter the garage results in disqualification; stopping midway results in disqualification; exceeding 4 minutes results in disqualification. Reverse parking mnemonic: Reversing into and out of the garage isn't hard, fasten your belt, shift gears, and flash the left light. Press the clutch and release the handbrake, slowly lift the clutch to start gently. Align the car body by watching the right line, the left mirror's vertical gap follows the right line. Stop when the front horizontal line aligns with your shoulders, shift into reverse gear and release the clutch. When the left mirror covers the horizontal line corner, turn the steering wheel fully to the right. Watch the left mirror for the garage line, turn back one circle at a 30-degree angle, and when the car aligns with the line, straighten the steering wheel with two full turns. When the left mirror covers the garage's front corner, press the clutch and brake. Shift into first gear to exit the garage, turn the steering wheel fully to the left when the car head touches the line. Stop the car when the car head covers the line, keep the steering wheel steady and reverse the car. Watch the right mirror for the garage line, turn back one circle at a 30-degree angle, and when the car aligns with the line, straighten the steering wheel with two full turns. When the left mirror covers the garage's front corner, press the clutch and brake. Shift into first gear to exit the garage, turn the steering wheel fully to the right when the car head touches the line. Stop the car when the car head covers the line, adjust the car body skillfully. The new garage has no poles to look at, only markings on the ground. The garage length is much shorter compared to the current one, just enough for a car to fit completely. Currently, the test involves two garages on the left and right. Starting from 2013, it was only one garage. The process involves reversing into the garage from the right, then driving out to turn left, reversing back in, and finally driving out to return to the starting point. This process is much simpler, omitting the current test's step of moving the car within the garage.
When I first started learning to drive, the dimensions for reverse parking were quite challenging. The driving school standard was about 7 meters long and 2.3 meters wide. This is a national standard designed to help beginners practice spatial control. During my practice, I kept crossing the lines, so my instructor reminded me to frequently check the rearview mirrors and reference points. Actually, these dimensions take into account the turning radius of compact cars, which fits perfectly with the sedan I drive. However, if the training ground is different, like in suburban driving schools, the space might be slightly wider or narrower, but it doesn’t affect the fundamentals. The key is repeated practice to develop a feel for it. Now, parking is much easier for me, all thanks to the foundation built here. Every time I reverse, I remind myself to take it slow, don’t rush, and prioritize safety.
