What are the differences between the S4 and S5?

1 Answers
AnnieFitz
07/30/25 5:03am
The differences between the S4 and S5 are: 1. Different dimensions: The S4 measures 4770mm in length, 1847mm in width, and 1404mm in height; the S5 measures 4702mm in length, 1846mm in width, and 1331mm in height. 2. Different body structures: The S4 has a 4-door, 5-seat sedan body structure; the S5 has a 2-door, 4-seat hardtop coupe body structure. Taking the Audi 2020 S4 3.0TFSI and the Audi 2020 S5 3.0T Coupe as examples: Both cars are manufactured by Audi (imported), classified as mid-size cars, with gasoline as the energy type, a maximum power of 260kw, a maximum torque of 500nm, an 8-speed automatic manual transmission, and a top speed of 250 kilometers per hour.
Was this review help?
7
0
Share
More Forum Discussions

Are private cars prohibited from driving on highways at night?

Private cars are not prohibited from driving on highways at night. Here is an introduction regarding traffic prohibitions: 1. Concept explanation: Traffic prohibition means no passage is allowed. Lines refer to the driving lanes marked on the road, such as center lines, dashed lines, solid lines, single yellow lines, double yellow lines; these lines regulate the lanes that various vehicles should use, such as fast lanes, slow lanes, overtaking lanes, motor vehicle lanes, bicycle lanes, bus lanes, etc. 2. Line signs: Prohibited lanes are determined by traffic police based on the lanes and surrounding road conditions, as well as social, environmental, production, and living conditions. Prohibiting vehicle passage or certain types of vehicles is based on the unified regulations of national traffic laws, with prohibition signs erected roadside.
9
3
Share

What is the Difference Between Body-on-Frame and Unibody?

The following are the specific differences between body-on-frame and unibody: 1. Structure: In body-on-frame vehicles, the bottom consists of an independent large steel frame or chassis beam. Components such as the engine and transmission system are mounted on this frame and connected to the front and rear parts of the vehicle via the front and rear suspensions. Unibody vehicles do not have a rigid frame at the bottom, but the front, rear, and side sections of the body are reinforced. The engine, front and rear suspensions, and transmission components are fixed in their designated positions and connected to the wheels via the suspensions. 2. Applicable vehicle types: Body-on-frame structures are relatively heavy, with high mass and a high center of gravity, making them suitable for trucks, buses, and off-road vehicles. However, due to their excellent stability and off-road performance, they are also used in some high-end vehicles. Unibody structures, known for their lighter weight and lower height, are primarily used in urban-oriented family cars and city SUVs.
13
4
Share

What Causes Inaccurate Fuel Gauge After Replacing a New Fuel Pump Assembly?

Inaccurate fuel gauge after replacing a new fuel pump assembly can be attributed to sensor malfunction, fuel gauge display issues, or differences in the mechanical position of the fuel pump. The specific reasons are as follows: Sensor Malfunction: Sensor malfunction is one of the reasons affecting the fuel gauge's inaccuracy, causing the gauge needle to fail to reach an accurate reading. This issue can only be resolved using professional debugging equipment at a repair shop. Fuel Gauge Display Issues: For fuel gauge display problems, cleaning and wiping the fuel gauge can help, or professional maintenance at a repair shop may be required. Differences in the Mechanical Position of the Fuel Pump: The new fuel pump's mechanical position may differ from the old one, requiring adjustment. A rough adjustment method is to press the reset button on the dashboard after replacing the fuel pump and observe whether the needle is at the empty position, adjusting it until it functions normally.
12
0
Share

Why Do Scooters Have Higher Fuel Consumption in Winter?

Scooters experience increased fuel consumption in winter due to incomplete combustion, higher operational resistance, and improper use of engine oil, as detailed below: Incomplete Combustion: During winter, the engine requires a longer warm-up period, and the low temperatures lead to incomplete combustion. Some gasoline and air-fuel mixture may be expelled without being fully burned, resulting in higher fuel consumption. Higher Operational Resistance: In winter, tires become harder, and various rotating components tighten up, increasing operational resistance. This also contributes to higher fuel consumption. Improper Use of Engine Oil: Due to lower temperatures in winter, engine oil tends to thicken. Especially after a scooter has been parked overnight, the oil usually settles at the bottom of the cylinder, leaving various engine components without proper lubrication. Therefore, it is necessary to use the appropriate type of engine oil to reduce energy consumption during cold starts.
6
2
Share

Do Snow Chains Affect the Car?

Improper use of snow chains can cause certain damage to both the tires and the wheel hubs. Below is a detailed introduction to snow chains: 1. Impact of installing iron chains: Iron chains are generally used only by heavy-duty vehicles for transporting goods. Iron snow chains can damage the tires because, due to the principle of action and reaction, while increasing the tire's grip, the adhesion coefficient between the tire and the snow chain will rise, potentially harming the tire. Additionally, the noise generated during driving will become more noticeable. 2. Precautions: When fixing iron snow chains, it is advisable to use soft straps for securing. The iron chains used for tightening should maintain a certain distance from the wheel hub, and the tightening force should not be too high, otherwise it may damage the tire sidewalls. The tire sidewalls consist of only a thin layer of rubber and fabric layers. Excessive compression that damages the structure of the fabric layers poses a risk of tire blowout.
14
2
Share

What is the meaning of the vehicle frame number?

Vehicle frame number is the VIN code, where VIN stands for Vehicle Identification Number. Below is an explanation about the vehicle frame number: 1. Relevant regulations: According to the SAE standard, the VIN code consists of 17 characters, hence it is commonly referred to as the 17-digit code. It contains information such as the vehicle manufacturer, year, model, body type and code, engine code, and assembly location. Correctly interpreting the VIN code is crucial for accurately identifying the vehicle model and conducting proper diagnosis and repairs. 2. Detailed explanation of the VIN code: (1) Positions 1-3 (WMI): Manufacturer, brand, and type. (2) Positions 4-8 (VDS): Vehicle characteristics. (3) Position 9: Check digit. (4) Position 10: Model year. (5) Position 11: Assembly plant. (6) Positions 12-17: Serial number.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.