···
Log in / Register

What are the differences between the ML350 Mercedes-Benz and the GLE350?

6Answers
MiaRose
07/29/2025, 07:37:08 PM

ML350 Mercedes-Benz and GLE350 have the following differences: 1. Different engines: Mercedes ML350: 245kW (3.0L twin-turbo) engine. Mercedes GLE350: 190kW (3.0L turbo) engine. 2. Different maximum torque: Mercedes ML350: maximum torque (Nm/rpm) 480/1600-4000. Mercedes GLE350: maximum torque (Nm/rpm) 620/1600-2400. 3. Different maximum horsepower: Mercedes ML350: maximum horsepower (Ps) 333. Mercedes GLE350: maximum horsepower (Ps) 258.

Was this review help?
101
Share
LaAaron
08/15/2025, 10:39:17 PM

I used to drive the older ML350 and later upgraded to the new GLE350, and the difference is quite noticeable. The ML was Mercedes-Benz's earlier SUV model, produced from 1997 to 2015—sturdy in appearance but with a simpler interior, offering smooth power delivery but higher fuel consumption. The GLE350, renamed after 2015, represents a comprehensive upgrade: a more streamlined design with lower drag, a cooler front grille with a larger 'mouth,' soft-touch materials inside, a large touchscreen with CarPlay, and improved engine efficiency for quicker starts and better fuel economy. Safety-wise, it adds automatic braking and lane assist. Daily driving in the GLE is quieter and more comfortable, especially on long trips, whereas the ML feels a bit bumpy. I recommend opting for the GLE when buying new—the used ML is budget-friendly but outdated in tech. Remember to check for system updates during maintenance to maximize the new car's advantages.

Was this review help?
6
Share
Expand All
DelJudah
10/18/2025, 11:08:16 PM

As a family member with more experience in car usage, the ML350 is a representative of the older Mercedes-Benz SUVs, known for its sturdiness and durability, making it suitable for daily commuting. However, its interior is relatively simple and lacks advanced technology. The GLE350 is the renamed version introduced after 2015, which is noticeably more modern: the exterior is sleeker and less outdated; the seats are softer, with reduced noise, providing better stability at high speeds; the powertrain has been optimized for smoother acceleration and lower failure rates. Many people often ask why the name was changed—it was simply part of Mercedes-Benz's unified naming system, with the transition from ML to GLE introducing new technologies like voice-controlled air conditioning. In practical use, the GLE is more convenient to maintain, with parts being easier to find. It's advisable not to confuse the two—new car owners should prioritize the GLE for its affordability and hassle-free ownership, but maintenance costs should not be skimped on.

Was this review help?
11
Share
Expand All
SanKathryn
12/01/2025, 10:42:23 PM

Simply put, the ML350 and GLE350 are products from different generations. The ML350 refers to the older model of the Mercedes-Benz ML-Class, popular in the 2000s; the GLE350 took over after 2015, renamed as the GLE-Class. The differences lie in design: the GLE is more stylish with wind tunnel optimization; technological upgrades: higher engine efficiency, potentially saving 10% on fuel; advanced interior with touchscreen. Better safety features, including blind-spot monitoring. Overall, the GLE represents the new standard, so be sure to check the year when buying a used ML.

Was this review help?
16
Share
Expand All
VonKevin
01/22/2026, 12:05:52 AM

I've been a family car user for many years and have studied these two models extensively. The ML350 is a classic Mercedes-Benz SUV, known for its reliable quality but with a hard interior and limited space. The GLE350, introduced in 2015 as an upgraded version, retains the essence but evolves: it has a sportier exterior, a more comfortable interior where kids don't fuss in the back; added tech like lane keeping for safety; and a more responsive engine that's fuel-efficient on long trips. There's often confusion over the names, but it's part of Mercedes' strategy. I recommend buying the newer GLE, paying attention to system updates for maintenance. The ML is a viable second-hand option but with a noticeable performance gap.

Was this review help?
20
Share
Expand All
LaEden
04/18/2026, 12:05:41 AM

When I first started learning to drive, I was also curious about the difference: the ML350 was Mercedes-Benz's older SUV, focusing on practicality; the GLE350 replaced it starting in 2015, bringing new changes with the name update. The GLE looks more stylish with larger wheels; the interior has been upgraded with voice control; the driving experience is more stable and smooth; and it includes new tech features like navigation assistance. Despite the similar names, the GLE is a new-generation model with more comprehensive features. I recommend taking it for a test drive—the GLE is noticeably easier and more enjoyable to drive. Don’t confuse the two when choosing a car; the GLE is perfect for daily commuting.

Was this review help?
2
Share
Expand All
More Q&A

What does ESP mean?

esp stands for Electronic Stability Program. Here are some details about ESP: 1. It is a general term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the car reaches its dynamic limits. 2. It analyzes vehicle driving state information from various sensors and then sends correction instructions to ABS and ASR to help maintain dynamic balance. 3. ESP can keep the vehicle in optimal stability under various conditions, with more pronounced effects in cases of oversteering or understeering.
115
Share

Why can't an automatic transmission car start?

Automatic transmission car cannot start for the following reasons: 1. Partial failure of the distributor wire: There are problems such as aging of the distributor wire, incorrect order of the cylinder wires, damage to the distributor, or loose spark plug caps; When starting the engine, there is an obvious sound of the starter working, indicating that the power supply is not a problem, the starter can work normally, and it may be that the fuel line is blocked and the fuel supply cannot keep up. 2. Incorrect car gear: Under normal circumstances, P gear or N gear is the starting gear of an automatic transmission car, and if the gear is in R gear or D gear, it will not only fail to start, but also have certain safety hazards; Once it is found that the gear is incorrect, adjust the gear in time.
108
Share

What is the situation when there is water under the driver's feet?

The situation where there is water under the driver's feet is as follows: 1. Sunroof leakage: Regularly clean the sunroof to keep the drainage groove clean. Also, don't forget to use high-pressure air jet equipment to blow out dirt in the drainage pipes during car washing. 2. Car waterproof glue failure causing leakage: Leakage usually occurs at the switches of doors and luggage compartments, mostly due to poor, aged, or broken rubber waterproof strips. Rainwater can seep in from there. Reapplying waterproof strip adhesive can completely prevent leaks. 3. Door leakage: If rainwater seeps in around the door, it is mostly due to the surrounding waterproof strips. Check for any breaks or peeling. The waterproof strips around the door are prone to misalignment. If water enters the car, first check the door's waterproof strips.
114
Share

What gear should an automatic car be in when parked with the air conditioning on?

When parking an automatic car with the air conditioning on, simply shift to P (Park) gear. Below is an introduction to the gears of an automatic car: 1. R (Reverse) gear: The reverse gear of an automatic car. After shifting into R gear, the car will generate backward traction, which is used for reversing into parking spaces or parallel parking. 2. N (Neutral) gear: The neutral gear of an automatic car. Unlike manual cars, it does not completely disconnect the transmission from the engine and should only be used briefly, such as when waiting at a traffic light. 3. D (Drive) gear: The forward gear of an automatic car. Simply shift into D gear, press the accelerator to speed up, and press the brake to slow down or stop the vehicle. 4. S (Sport) gear: The sport mode of an automatic car. It allows the car to deliver stronger power and acceleration, making it suitable for use on highways or in heavy traffic. 5. L (Low) gear: The low-speed gear of an automatic car, also known as the hill-climbing gear. It reduces the car's speed to ensure the engine delivers powerful torque, making it ideal for rough roads or when climbing long slopes for sufficient power.
108
Share

Is 120 Horsepower Enough for Climbing Hills?

A bit challenging. 120 horsepower is sufficient for daily family use. Engine horsepower determines speed, while torque determines power. Theoretically, the greater the horsepower, the faster the car can go. However, a car's speed is determined by multiple factors, not just horsepower alone. Below is a detailed explanation: 1. Engine Power: Whether more power is better is generally considered under the same displacement conditions. Of course, the more power, the better. Some car manufacturers use advanced technologies such as intake valve stroke control, EGR, and 5-valve systems, which inevitably increase power. However, this also means higher engine costs. 2. Below is additional information: 1. Power-to-Weight Ratio: The power-to-weight ratio is specific to the car's engine and is an important indicator of a car's performance. The higher the power-to-weight ratio, the better the car's performance. 2. Power Output Curve: For car engines with similar power, the earlier the maximum power/torque is achieved and the longer it is maintained, the better the car's acceleration performance. This is an important indicator for ensuring good acceleration.
120
Share

How to resolve the P0013 trouble code?

You can resolve the P0013 trouble code by checking the variable timing actuator circuit or replacing the camshaft position actuator. Here is relevant information about the P0013 trouble code: 1. In the camshaft variable valve timing system, the electronic camshaft adjustment valve adjusts the camshaft angle by changing the oil pressure to the camshaft adjuster (mechanical type) based on commands from the Engine Control Module (ECM), ensuring that the valves open and close at the optimal time. 2. After troubleshooting a vehicle issue, it is generally necessary to clear the trouble code. 3. When clearing trouble codes, it is essential to follow the specified method for the particular vehicle model. Never simply disconnect the battery negative ground cable to clear the trouble code.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.