What are the differences between the Huanglong 600 TNT, BN, and BJ?

How to Deal with Insufficient Car Tire Pressure?

Visually inspect whether the tire can still continue to drive. If it can, drive to the nearest tire repair shop for handling; if the tire pressure is too low to drive, use a car air pump to inflate it a little, then go to the nearest repair shop; or replace the spare tire and then go for repairs. According to the international GBT2978-2008 standard, the tire pressures for different tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; The maximum pressure should not exceed 3.5bar. Normal tire pressure in winter: In winter, adjust the tire pressure based on the standard car tire pressure, increasing it by about 0.2bar. Normal tire pressure in summer: Generally, the lower limit of the standard car tire pressure is sufficient. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1bar lower than the standard to avoid high-temperature blowouts.

6

1

Share

Where is the Geely Vision car charger located?

Geely Vision car charger is located at the right knee position of the main driver's compartment and the left knee position of the co-driver's compartment. Configuration of Geely Vision: Added keyless entry and one-button start, panoramic sunroof, etc., all of which are purposefully added to meet consumer needs. In addition, the standard eight-in-one Bosch ESP system and EPB-AUTOHOLD, the new Vision SUV is also equipped with a hidden high-definition driving recorder, 360° 3D panoramic imaging system, TPMS tire pressure monitoring system, and LIM electronic speed limit system, etc., to ensure the safety of users' driving in all aspects. Power of Geely Vision: The Vision is equipped with a 1.8L naturally aspirated engine and a 1.4T turbocharged engine. Among them, the maximum power of the 1.4T turbocharged engine is 98kw (133 horsepower), and the maximum torque is 215N.m. In terms of the transmission system, the 1.8L engine is matched with a 5MT transmission, and the 1.4T is matched with a simulated 8CVT transmission.

1

5

Share

Is the Envision equipped with a wet dual-clutch transmission?

The Envision's dual-clutch transmission is dry. Introduction to Dual-Clutch Transmission: A dual-clutch transmission (DCT) is a type of transmission that combines the features of both manual and automatic transmissions. It offers the flexibility of a manual transmission and the comfort of an automatic transmission while providing uninterrupted power output. The Envision is a midsize SUV under the Buick brand, with a wheelbase of 2750mm, and dimensions of 4686mm in length, 1839mm in width, and 1686mm in height. Introduction to the Envision: The Envision is equipped with two types of engines: one is a 1.5-liter turbocharged engine paired with a 7-speed dual-clutch transmission, and the other is a 2.0-liter turbocharged engine paired with a 9-speed automatic transmission. The front suspension of the Envision uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.

1

3

Share

What Causes Valve Leakage?

Valve leakage can be caused by the following reasons: 1. Wear and burning of the valve and valve seat working surfaces, leading to spots, pits, or carbon deposits. 2. Excessive clearance between the valve stem and the valve guide sleeve, causing the valve stem to wobble. 3. Weakening or loss of elasticity in the valve spring, or spring breakage. 4. Factors such as excessively small valve clearance. Additional related information is as follows: 1. The car valve, also known as the throttle, is responsible for introducing fuel into the engine and expelling exhaust gases. Traditional engines have only one intake valve and one exhaust valve per cylinder. This design is relatively simple, cost-effective, easy to maintain, and performs well at low speeds. However, its drawback is difficulty in increasing power, especially due to low charging efficiency and weaker performance at high speeds. 2. To improve intake and exhaust efficiency, multi-valve technology is now commonly used, with each cylinder typically having four valves (some designs feature three or five valves per cylinder, following the same principle, such as in the Audi A6 engine). A four-cylinder engine thus has a total of 16 valves, often denoted as "16V" in car specifications, indicating the engine has 16 valves in total.

18

5

Share

What are the differences between Paladin and Odin?

Paladin and Odin differ in the following aspects: Different engine displacements: The Paladin only comes with two engine options: 2.4L and 3.3L, both of which are imported gasoline engines. In contrast, the "Odin" offers three engine choices including 2.4L, 3.0L, and 3.2L, featuring both domestically produced and imported gasoline and diesel engines. Different suspensions: The "Odin" inherits the Paladin's double-wishbone independent front suspension, but its rear suspension is changed to a five-link coil spring non-independent type, enhancing comfort. Different models: The "Odin" is available in both manual transmission and automatic transmission variants. Different performance characteristics: The "Odin" embodies typical urban SUV features, such as 2WD automatic transmission, electronic 4WD switching, and exterior styling more suited for city use. Optional features like visual parking sensors and an electronic compass are also available.

7

4

Share

What happens if a car that requires 95-octane gasoline is filled with 92-octane?

It is generally not recommended to mix gasoline of different octane ratings. If a car designed for 95-octane gasoline is filled with 92-octane, the following issues may occur: 1. The vehicle may experience insufficient power and increased fuel consumption; 2. This can further lead to accelerated wear and damage of engine components, triggering the engine fault warning light; 3. Some vehicles may stall and fail to start. Below are some related details about mixing gasoline: 1. Mixing lower-octane gasoline into a higher-octane vehicle: (1) This may cause engine knocking, leading to overloading and damage to components such as pistons, connecting rods, and cylinder heads; (2) The engine may overheat, causing more combustion byproducts to decompose, increasing exhaust temperature, reducing engine power, and increasing fuel consumption; (3) Elevated engine temperature may result in poor lubrication of moving parts, leading to abnormal wear. 2. Mixing higher-octane gasoline into a lower-octane vehicle: (1) This may cause delayed combustion, ultimately leading to incomplete fuel combustion, increased carbon deposits in the engine, and engine damage.

20

1

Share

What are the differences between the Huanglong 600 TNT, BN, and BJ?

How to Deal with Insufficient Car Tire Pressure?

Where is the Geely Vision car charger located?

Is the Envision equipped with a wet dual-clutch transmission?

What Causes Valve Leakage?

What are the differences between Paladin and Odin?

What happens if a car that requires 95-octane gasoline is filled with 92-octane?

What are the reasons for the blower not working?

What is Crawl Mode?

Is the new Besturn B70 fuel-consuming?

What type of gasoline should be used for the BMW 218i?