What are the differences between the BMW 3 Series GT and the 3 Series?

Is Baojun a Domestic or Joint Venture Brand?

Baojun is a joint venture brand, with models including: Baojun 310, Baojun 710, Baojun 530, Baojun 510, Baojun 360, etc. Taking the 2021 Commemorative Edition Baojun 530 as an example, its body dimensions are: 4690mm in length, 1835mm in width, and 1750mm in height, with a wheelbase of 2750mm, a fuel tank capacity of 52 liters, a minimum ground clearance of 190mm, and a curb weight of 1465kg. The 2021 Commemorative Edition Baojun 530 is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 147PS, a maximum power of 108kW, and a maximum torque of 250Nm, paired with a 6-speed manual transmission.

16

0

Share

What to Do If the Car Always Stalls When Starting?

If the car always stalls when starting, the solutions are: 1. Check each system for faults or damages; 2. Remove the spark plugs to see if they need replacement; 3. Clean the throttle body; 4. Slowly release the clutch while increasing the throttle when raising the RPM; 5. Shift gears only when the speed has increased to the appropriate level for the corresponding gear. The reasons for the car stalling when starting are: 1. Faults in the intake system, ignition system, or fuel system; 2. Faulty spark plugs; 3. Clogged throttle body; 4. Improper coordination between the throttle and clutch, or inaccurate clutch half-engagement; 5. Mismatch between the gear and speed.

19

1

Share

What is the name of Beijing Hyundai Celesta?

The name of Beijing Hyundai Celesta is Elantra, with body dimensions of 4510mm in length, 1765mm in width, and 1470mm in height, a wheelbase of 2650mm, a fuel tank capacity of 50 liters, a trunk capacity of 490 liters, and a curb weight of 1167kg. The Elantra features front-wheel drive, with a front suspension of MacPherson strut independent suspension and a rear suspension of torsion beam non-independent suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 123PS, a maximum power of 90.2kW, and a maximum torque of 150.7Nm, paired with a 6-speed automatic transmission.

17

1

Share

Does the Mercedes-Benz C-Class have ambient lighting?

The Mercedes-Benz C-Class is equipped with ambient lighting, which serves as a decorative illumination feature. It comes in colors such as red, blue, and green, enhancing the cabin's ambiance at night, making it more vibrant and comfortable. The models in the Mercedes-Benz C-Class series include: the Mercedes-Benz C180, C200, C260, C300, and CLE. Taking the Mercedes-Benz C200 as an example, its body dimensions are 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm and a fuel tank capacity of 66 liters. The Mercedes-Benz C200 is powered by a 1.5T turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 250Nm, paired with a 9-speed automatic transmission.

2

0

Share

Where is the throttle located in the engine?

The throttle is positioned in the engine's intake pipe, connected to the air filter. It serves as a controllable valve regulating air intake into the engine. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which ignites to generate power. This component is crucial in electronic fuel injection engine systems. Throttles are categorized into: 1. Traditional engine throttle: Its operating mechanism functions via a cable or rod, with one end linked to the accelerator pedal and the other to the throttle linkage plate. 2. Electronic throttle: This type utilizes a throttle position sensor to adjust the throttle opening angle based on the engine's power requirements, thereby regulating the intake air volume.

10

0

Share

Where is the Santa Fe engine produced?

The Santa Fe engine is produced in Hangzhou, China. The working principle of the engine: 1. Mix air and gasoline in a certain proportion to form a combustible mixture; 2. The intake stroke draws the mixture into the cylinder, where it is compressed, ignited, and burned to generate thermal energy; 3. The high-temperature and high-pressure gas acts on the top of the piston, driving the piston to perform reciprocating linear motion, and the mechanical energy is output externally through the connecting rod, crankshaft, and flywheel mechanism. The functions of the engine: 1. Fully burn the fuel input into the cylinder to generate power; 2. Determine the vehicle's power performance, fuel economy, stability, and environmental friendliness. Engine maintenance methods: 1. Use qualified engine oil; 2. Use qualified coolant; 3. Regularly clean the water tank scale; 4. Regularly remove carbon deposits from the engine; 5. Replace the vehicle's air filter, oil filter, and fuel filter on time; 6. Check the condition of the spark plugs; 7. Maintain normal engine speed.

19

3

Share

What are the differences between the BMW 3 Series GT and the 3 Series?

Is Baojun a Domestic or Joint Venture Brand?

What to Do If the Car Always Stalls When Starting?

What is the name of Beijing Hyundai Celesta?

Does the Mercedes-Benz C-Class have ambient lighting?

Where is the throttle located in the engine?

Where is the Santa Fe engine produced?

What Causes the Squeaking Sound When Pressing the Clutch Pedal?

Is an Exam Required for Upgrading from C1 to B2 License?

What is the correct way to use a vehicle?

What are the reasons for the engine not turning?