What are the differences between Teana and Maxima?

How to Remove the Maintenance Reminder on the Haval H6 Dashboard?

Haval H6 maintenance reminder elimination method: Turn off the key, press and hold the button at the lower right of the dashboard; turn the key to the position where all dashboard lights are on, and release the button after the small wrench icon on the dashboard stops flashing; press the button at the lower left of the dashboard, and the small wrench will disappear, thus eliminating the maintenance reminder. Relevant information about the Haval H6 is as follows: 1. The Haval H6's body dimensions are: length 4653mm, width 1886mm, height 1730mm, with a wheelbase of 2738mm. 2. The Haval H6 features a MacPherson strut front suspension and a multi-link independent rear suspension, equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211PS, maximum power of 155kW, maximum torque of 325Nm, paired with a 7-speed dual-clutch transmission.

15

2

Share

What Does Blind Spot Monitoring Mean?

Blind spot monitoring refers to the installation of a camera on the right side mirror, which displays the image of vehicles located in the blind spot area on the screen. The functions of blind spot monitoring are: 1. Reduce the visual blind spots of the side mirrors; 2. Assist in expanding the field of vision; 3. When preparing to change lanes, it can confirm a wider rear view; 4. Provide more practical safety protection for everyone inside and outside the vehicle. The installation steps for blind spot monitoring are: 1. Connect the wiring and determine the installation position of the camera on the side mirror; 2. Wipe off the dust under the side mirror with a towel, peel off the adhesive tape of the camera, and stick it directly in place; 3. Guide the wire back into the car through the door gap, secure it along the edge with tubing and clips, and coil the wire neatly under the seat; 4. Plug in the cigarette lighter charger, connect the screen, and turn on the cigarette lighter switch.

7

2

Share

Why does 12123 show failure when the test is passed?

The reason why the test is passed but the traffic management 12123 shows failure is that the real-time data of the test results has not been uploaded to the system yet. It takes 1-2 days for the qualified results to be queried in the traffic management 12123. Introduction to Driver's License: The full name of the driver's license is the motor vehicle driver's license, also known as the driver's license. It is the license required by law for motor vehicle drivers to apply for. In China, the definition of a driver's license is: A motor vehicle driver's license is a legal document issued by the management department after the applicant has learned and mastered the knowledge of traffic regulations and driving skills, and passed the examination, permitting the applicant to drive a certain type of motor vehicle. Application Location: Those who apply for a motor vehicle driver's license should submit their application to the vehicle management office according to the following regulations.

17

3

Share

What Are the Consequences of Not Renewing a Driver's License for Over One Year?

It will be revoked. If a driver's license is expired, traffic police will impose a fine upon discovery, but no points will be deducted. There is a latest deadline for renewing a driver's license. If it has been expired for less than one year, it can be renewed through the normal process; if it has been expired for one to three years, the license will be revoked, but it can be regained by passing the subject one exam; if it has been expired for over three years, the license will be revoked. Article 57 of the 'Traffic Regulations and Point Deduction Rules': The driver of a motor vehicle shall apply for renewal of the motor vehicle driving license within 90 days before the expiration of the validity period of the motor vehicle driving license, at the vehicle management office where the motor vehicle driving license was issued or at other vehicle management offices. Remedial measures for a driver's license that has been expired for over one year: Stop driving on the road: Avoid being penalized for driving without a license. Prepare for Subject One: Before preparing, report to the vehicle management office, explain the situation to the staff, and then schedule the Subject One exam. Handle traffic violations: Complete this at the vehicle management office or traffic police station. Get a nearby medical examination: The main checks include color blindness identification, limb integrity, and corrected vision. You can choose the examination hall of the vehicle management office, a manual examination room, a community hospital (with examination qualifications), or a convenient examination service station. The results will be uploaded to the traffic management system. When applying, the application form shall be filled out, and the following certificates and documents shall be submitted: the identity certificate of the motor vehicle driver, the motor vehicle driving license, and the medical condition certificate issued by a medical institution at or above the county level or a military unit at or above the regiment level. For those applying for a special small automatic passenger car for the disabled, a medical condition certificate issued by a specialized medical institution designated by the provincial health authority shall be submitted. Materials required for renewing a driver's license: original ID card and its copy, qualified medical examination form from a hospital designated by the vehicle management office, three one-inch white-background color photos, completed driver's license renewal application form, and the fee. Photos and medical examination certificates required for renewal can be brought by yourself. If you are worried that they may not meet the requirements, you can directly handle them at the traffic police station's certification hall to avoid wasting time. Related matters for renewing an expired driver's license: About renewal: For annual review and renewal of an expired driver's license, the old license must be surrendered to the vehicle management office. Before renewal, all related traffic violations must be handled; otherwise, the application cannot be processed. The motor vehicle driving license can be renewed through the mobile app 'Traffic Management 12123,' the vehicle management office, traffic management departments, or public security authorities.

13

1

Share

How to Solve the Noise Problem in Fit?

You can perform full-vehicle sound insulation. Here is some relevant information about the Fit: 1. Structure of the Fit: The Fit adopts a front MacPherson independent suspension and a rear torsion beam non-independent suspension structure. However, the front suspension uses a geometric-shaped structure, and the rear suspension has also been partially adjusted, including the angle of the shock absorber, the torque-decomposed shock absorber bracket, etc. In addition, stabilizer bars are installed on both the front and rear suspensions to improve body stability during steering. 2. How to Solve the Noise Problem: Performing full-vehicle sound insulation can significantly reduce the noise in the Fit, with the decibel level likely to drop by about 5. Use high-quality sound insulation materials, and it is necessary to perform wheel arch sound insulation, engine sound insulation, and firewall sound insulation, among others.

9

0

Share

What are the methods to judge blind spots while driving?

Here are the specific methods to judge blind spots while driving: 1. Rear blind spot: Observe the surroundings of the vehicle before getting in, and check the terrain and obstacles. While driving, frequently monitor the movement of vehicles and pedestrians in the rearview mirror, and use both the interior and exterior mirrors when reversing. 2. Right-side A-pillar blind spot: Observe the right-side road conditions before making a right turn, turn on the right turn signal and honk the horn, then slowly turn right while leaning forward to check the right-side road conditions; start slowly when the light turns green, try not to stop on the right side of large or tall vehicles, and avoid rushing to start when the light turns green. 3. Right-side B-pillar blind spot: Avoid making sharp lane changes, turn on the turn signal before changing lanes, honk to alert nearby vehicles, check the right-side mirror and turn your head to the right to confirm road conditions, then change lanes safely by steering.

5

3

Share

What are the differences between Teana and Maxima?

How to Remove the Maintenance Reminder on the Haval H6 Dashboard?

What Does Blind Spot Monitoring Mean?

Why does 12123 show failure when the test is passed?

What Are the Consequences of Not Renewing a Driver's License for Over One Year?

How to Solve the Noise Problem in Fit?

What are the methods to judge blind spots while driving?

What does SN grade engine oil mean?

How to Drive an Automatic Transmission Car Uphill?

How to Operate the Alternation Between High Beam and Low Beam?

How to Remove the Driver's Airbag in an Audi S5?