What are the differences between SAIC Volkswagen and FAW Volkswagen

2 Answers
MariaDella
07/25/25 3:22am
SAIC Volkswagen and FAW Volkswagen differ in the following aspects: 1. Different establishment times: FAW Volkswagen was established in 1991. SAIC Volkswagen was established in 1985. 2. Different equity ratios: FAW holds 60% of FAW Volkswagen's shares, while German Volkswagen holds 40%. SAIC Group and German Volkswagen each hold 50% of SAIC Volkswagen's shares. 3. Different car models produced: FAW Volkswagen currently produces models such as Jetta, Audi, Sagitar, CC, Bora, and Golf. SAIC Volkswagen currently produces models such as Santana, Touran, Tiguan, Skoda, Octavia, Superb, Polo, Lavida, and Passat.
Was this review help?
5
4
Share
LaMariana
08/10/25 4:57pm
I've been a car enthusiast for decades, closely following the Chinese auto market. SAIC Volkswagen and FAW-Volkswagen are both joint ventures of the Volkswagen brand in China, but with different major shareholders: SAIC Volkswagen is led by SAIC Group, established in 1984 as one of the earliest joint ventures, with production bases mainly in Shanghai and Jiangsu. Models like the Lavida and Passat are more tailored to local preferences, incorporating many Chinese design elements that resonate well with family users. On the other hand, FAW-Volkswagen is controlled by FAW Group, founded in 1991, with factories primarily in Changchun and Chengdu. Its products such as the Magotan and Sagitar stay truer to their European roots, offering stronger driving dynamics that appeal to younger demographics. Their market strategies differ too – SAIC performs better in southern China while FAW is more popular in the north. Your choice should depend on your region and driving preferences. Both deliver reliable quality, though after-sales service networks may vary by location. I recommend test-driving both models before making a decision to compare them firsthand.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

How many kilometers should the timing belt of Changan Honor be replaced?

Generally, it can be considered for replacement at 70,000 kilometers. If it exceeds 80,000 kilometers, it is recommended to replace it promptly. Here is relevant information: 1. The timing belt is a rubber component, and a major characteristic of rubber is that it ages. Combined with normal wear and tear, the timing belt must be replaced in time when it reaches the specified mileage. Generally, the original factory-installed belt is more durable and can be replaced at around 80,000 kilometers. 2. However, when the vehicle reaches 70,000 kilometers, it is best to check it during every maintenance. If there are no issues, it can continue to be used. If cracks or other signs are found, it should be replaced promptly to avoid breakage during driving, which could lead to accidents. 3. If the timing belt suddenly breaks while driving, the engine valves and ignition system will not function properly, causing the engine to suddenly stall and coast. This can result in bent valve pushrods, dented piston tops, and even holes in the cylinder head.
11
1
Share

How to Check Engine Oil Quality?

Methods to check engine oil quality mainly include: 1. Oil Drop Test. Place a drop of oil from the oil pan on a white paper. If the center black spot is large, dark brown, uniform without particles, and the surrounding yellow infiltration is small, it indicates the oil has deteriorated and should be replaced. If the center black spot is small and light in color with a larger yellow infiltration area, the oil can still be used. 2. Dipstick Identification. Pull out the oil dipstick and observe the scale lines against a bright light. If the scale lines are not visible through the oil on the dipstick, it means the oil is too dirty and needs immediate replacement. 3. Rub Test. Take a small amount of oil from the oil pan and rub it between your fingers. If it feels sticky and shows a stringy phenomenon, the oil is still good and can be used. Otherwise, it should be replaced. 4. Pour Test. Take a small amount of oil from the oil pan and pour it into a container, then slowly pour it out. Observe the gloss and viscosity of the oil flow. If the oil flow remains thin, long, and uniform, it can still be used. Otherwise, it should be replaced.
11
1
Share

How Many Types of Differential Locks Are There?

Automotive differential locks mainly include the following types: 1. Open Differential. The open differential allows the left and right wheels to rotate at different speeds when the car turns. 2. Multi-plate Clutch Limited Slip Differential. It is equipped with a clutch, consisting of several friction plates and steel plates. The friction plates are clamped to the rotating shaft, while the steel plates are clamped to the axle housing. 3. Torsen Differential. The core of the Torsen differential is the worm gear and worm wheel meshing system. Due to its fast response speed, the Torsen differential is widely used in central differentials and inter-wheel differentials in many vehicles. 4. Viscous Coupling Differential. It does not require driver intervention and can automatically distribute power to the rear drive axle as needed.
20
3
Share

What Causes Cold Start Shaking?

Causes of car cold start shaking mainly include: 1. Improper air-fuel mixture. The air-fuel mixture ratio is inaccurately adjusted, occurring in both open-loop and closed-loop control systems. In vehicles with closed-loop control, the oxygen sensor's minimum operating temperature is 370 degrees Celsius. 2. Carbon deposits on valves and intake ports. If carbon deposits form on the valves and intake ports inside the engine, they can absorb a certain amount of fuel, causing the ECU to make incorrect judgments. 3. Uneven cylinder conditions. After prolonged use of the engine, the gap between each cylinder liner and piston can vary in size—some gaps are larger, while others are smaller. During a cold start, without proper oil lubrication, larger gaps in the cylinders can allow leakage of high-temperature gases, reducing power output. 4. Faulty coolant temperature sensor. The coolant temperature sensor is one of the key inputs for the ECU to determine the engine's operating condition. If the engine is cold-starting at -10 degrees Celsius, but the sensor "tells the ECU the temperature is 20 degrees Celsius," the ECU will inject fuel based on a 20-degree condition. Naturally, the fuel amount will be insufficient, leading to shaking.
15
4
Share

What are the body dimensions of the Audi S3?

The body length of the Audi S3 is 4504mm, the width is 1816mm, and the height is 1415mm, as per official data. The length of the Audi S3 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the car. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane. The Audi S3 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 228 kW at 5450 to 6500 rpm and a maximum torque of 400 Nm at 2000 to 5450 rpm. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is intended to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
18
2
Share

Where is the Hanteng car produced?

The production location of Hanteng cars is Hanteng Automobile Co., Ltd. Here is an introduction about Hanteng cars: 1. Jiangxi Hanteng Automobile Co., Ltd. is a vehicle manufacturing enterprise that produces traditional fuel-powered cars and new energy vehicles, located in Shangrao, Jiangxi, committed to global quality standards. 2. Taking the Hanteng X7 as an example, it is a compact SUV under the Hanteng brand, with dimensions of 4671 mm in length, 1902 mm in width, and 1697 mm in height. 3. In terms of appearance, the Hanteng X7 features a front face with a double-bar grille connected to the dual headlights, decorative pieces on the fenders, and chrome accents at the rear. 4. For the interior, the Hanteng X7 is equipped with a 9-inch multi-touch capacitive screen, a leather multifunction steering wheel, and a neatly designed dashboard.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.