What are the differences between Mitsubishi Lancer and Evo?

1 Answers
MacMakayla
07/30/25 3:44am
Here are the differences between Mitsubishi Lancer and Evo: In terms of driving force: the Lancer is front-engine front-wheel drive, while the Mitsubishi Evo is front-engine four-wheel drive. In terms of engine characteristics: the Lancer Evo series is equipped with a 2-liter turbocharged engine and a four-wheel drive system. The Mitsubishi Evo is equipped with a powerful newly developed lightweight aluminum cylinder block 2.0L DOHC-MIVEC turbocharged engine, and also features a high-performance twin-scroll turbocharger to enhance its power. In terms of configuration features: the Lancer Evolution is equipped with a MOMO genuine leather-wrapped 3-spoke steering wheel. The seats adopt RECARO-style racing seats. The RS model successfully achieves lightweight with a power-to-weight ratio of 4.68kg/ps by saving on equipment. The Evo's configuration also has some small highlights, such as the front headlight irradiation angle being adjustable up and down, and the rear seat being equipped with child seat fixing anchors, etc.
Was this review help?
19
3
Share
More Forum Discussions

Where to Insert the USB Drive in a 2014 Geely Englon SC7?

In the 2014 Geely Englon SC7, the USB port is located at the bottom of the driver's compartment, near the clutch pedal. USB Port Current: Many car USB ports are designed for audio data transmission. The current of car USB ports can be either 5V/2.1A or 5V/0.5A. However, many mobile phones require an input current of 5V/1A or 5V/2.1A for in-car USB charging. If a 5V/0.5A port is used, it clearly falls short of the required current. Charging a phone under such conditions not only takes a long time but can also cause the phone to overheat. Abnormal USB Charging: Many drivers might experience a situation where the battery level drops instead of rising while charging via USB. This could be because some drivers are using navigation simultaneously while charging, leading to a smaller current where the power consumed exceeds the power charged.
1
2
Share

What is the reason for the Jetta fan not rotating at low speed?

Jetta fan not rotating at low speed is due to poor water temperature control, insufficient transformer current, or fan malfunction. The following are specific reasons: Water temperature issue: Poor water temperature control can cause the cooling fan not to rotate. Generally, at lower temperatures, its water temperature sensor cannot influence the generator to start the fan, thus affecting the rotation of the car's cooling fan. Therefore, it is necessary to properly control the water temperature to meet the specified requirements. Insufficient transformer current: The adjustment of fan speed relies on the transformer. So, when the current inside the transformer is too small or there is an internal malfunction, it will affect the operation of the cooling fan. Therefore, it is necessary to check whether the current flowing through the transformer is within the normal range and whether this part is functioning properly. Fan malfunction: The reason for the car cooling fan not rotating is also related to the fan itself. It must be strictly inspected and repaired or replaced in time to avoid affecting the use of the car.
13
3
Share

What Causes the Abnormal Noises in the New LaCrosse?

It is normal for the new LaCrosse to produce abnormal noises inside the cabin when driving on bumpy roads, mainly due to component misalignment, collisions, or electrical current sounds. Below are detailed explanations and solutions: Component Misalignment: Gaps, deviations, or shifts between leather and plastic components can cause abnormal noises when squeezed or loosened on bumpy roads. Solution: Identify the source of the noise and use items like tissue paper or rubber sheets as spacers to block the gaps. Component Collisions: Abnormal noises may result from collisions between the car's audio amplifier and other components. Solution: Tighten the screws to secure the amplifier, CD player, or other components. Electrical Current Issues: Electrical current sounds inside the cabin are usually louder right after starting the car, especially during cold starts when audio, air conditioning, or other devices turn on immediately or automatically. Solution: The noise will naturally disappear after the engine warms up or after driving for a while.
16
3
Share

Which country does Maybach belong to?

Maybach belongs to Germany and is a brand under Mercedes-Benz specializing in the production of ultra-luxury cars. Below is extended information about the Maybach S-Class: 1. The Maybach S-Class is equipped with three engines in total, which are a 3.0-liter twin-turbocharged engine, a 4.0-liter twin-turbocharged engine, and a 6.0-liter twin-turbocharged engine. 2. The 3.0-liter twin-turbocharged engine has a maximum power of 270 kW, a maximum torque of 500 Nm, a maximum power speed range of 5500 to 6000 rpm, and a maximum torque speed range of 1800 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission. 3. The 6.0-liter twin-turbocharged engine has a maximum power of 463 kW, a maximum torque of 1000 Nm, a maximum power speed of 4800 rpm, and a maximum torque speed range of 2300 to 4200 rpm. This engine utilizes multi-point fuel injection technology and also uses an aluminum alloy cylinder head and block. It is paired with a 7-speed automatic transmission.
3
0
Share

What type of oil does the Trumpchi GS3 use?

The Trumpchi GS3 uses 5W30 engine oil, and its user manual specifies that the oil type should be SN grade or above, with a filling capacity of 4.5 liters. Taking the 2021 Trumpchi GS3 as an example, it belongs to the compact SUV category, with body dimensions of: length 4350mm, width 1825mm, height 1685mm, a wheelbase of 2560mm, a fuel tank capacity of 50 liters, and a curb weight of 1347kg. The 2021 Trumpchi GS3 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 163PS, a maximum power of 120kW, and a maximum torque of 235Nm, paired with a 6-speed manual transmission.
5
2
Share

Where is the cabin air filter located in the Great Wall Haval H3?

Haval H3 cabin air filter location: The cabin air filter of the Haval H3 is located behind the glove compartment on the passenger side. You can see it after removing the glove compartment. The steps to replace the Haval H3 cabin air filter are as follows: 1. Open the storage box, you will see two screws on the top, remove them; 2. After removing the screws, take out the entire storage box; 3. Locate the internal blower installation position; 4. Use a Phillips screwdriver to remove the three fixing screws, then disconnect the blower's quick connector and duct; 5. After removing the blower, you can see the cabin air filter at the air inlet and outlet, simply pull it out; 6. Assemble the new cabin air filter into the blower air inlet in the correct direction; 7. Reinstall the blower into the vehicle, first insert the duct, then secure the three fixing screws, finally connect the blower quick connector, and reinstall the storage box. Job done.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.