What are the differences between Maybach and Mercedes-Benz S-Class?

1 Answers
EverlyLynn
07/29/25 4:50pm
The differences between Maybach and Mercedes-Benz S-Class are as follows: 1. Size: The body length of Maybach is generally around 5466mm, while that of Mercedes-Benz S-Class is around 5259mm. 2. Logo: The logo of Mercedes-Benz S-Class remains the three-pointed star, while Maybach's logo resembles two overlapping M letters. 3. Seating: The Mercedes-Benz S-Class typically seats five, whereas Maybach seats four. Here is some related information about Maybach: Maybach is an ultra-luxury car brand, first established in the 1920s by Wilhelm Maybach, who was also one of the inventors of the world's first Mercedes-Benz car and one of the three main founders of Daimler-Benz AG.
Was this review help?
1
4
Share
More Forum Discussions

What is the general capacity of a windshield washer fluid reservoir?

Generally, a windshield washer fluid reservoir holds about 4.5 liters. However, the filling capacity varies depending on the vehicle model. For ordinary sedans, adding 2 liters is usually sufficient. The method to add windshield washer fluid is as follows: 1. Turn on the wiper switch to spray the fluid onto the windshield; 2. Open the washer fluid filler cap and add a small amount of fluid; 3. Turn on the wiper switch to clean the remaining fluid; 4. When no more fluid sprays out from the nozzles during the second attempt, add more washer fluid. The functions of windshield washer fluid include: 1. Cleaning debris off the windshield; 2. Lowering the freezing point of the liquid; 3. Ensuring the windshield remains clear and transparent for good visibility; 4. Eliminating static charges on the glass surface; 5. Reducing friction between the wipers and the glass to prevent scratches.
1
0
Share

Is it normal to have a speed of 120 km/h with an engine speed of 3500 rpm?

A speed of 120 km/h with an engine speed of 3500 rpm is not normal; this rpm is relatively high. Generally, most cars maintain an engine speed of around 2000 rpm at 120 km/h. When driving at high speeds, the transmission is usually in a high gear, which helps reduce engine speed and save fuel. Engine speed constantly reflects the working condition of the engine. If the speed is too low, fuel combustion in the cylinders may be incomplete, leading to carbon buildup in the engine, which can cause significant damage over time. Conversely, if the speed is too high, it can result in greater engine wear. Engine speed refers to the number of revolutions an object makes around a circular path per unit of time (different from frequency), with common types including rated speed and maximum speed.
3
1
Share

How to turn on the high beam of BYD Qin Pro?

The method to turn on the high beam of BYD Qin Pro is: The high beam switch is located on the combination switch behind the left side of the steering wheel. By operating the combination switch, you can control the lights. The height of the headlights can be adjusted using the adjustment knob on the instrument panel behind the left side of the steering wheel. Choose whether to turn on the high beam according to road conditions. If driving on main urban roads, even at midnight, the road lighting is usually sufficient, so there is no need to turn on the high beam. If driving on mountain roads or in rural areas, turn on the high beam in advance after nightfall to avoid accidents. The BYD Qin Pro adopts BYD's Dragon Face design language, features an open platform, and has a body length, width, and height of 4765mm, 1837mm, and 1500mm respectively, with a wheelbase of 2718mm.
1
3
Share

What Causes the Clanking Noise During Cold Start?

Cold start clanking noise can be attributed to the following reasons: 1. If there is a clicking sound within the first half minute that disappears afterward, this is usually caused by the expansion of the catalytic converter as it heats up, which is normal; 2. A loud clicking noise during cold start is mostly due to issues with the engine's timing system, such as wear, elongation, or loosening of the timing belt or chain, or the failure of the chain tensioner to maintain proper tension; 3. If the noise occurs only when the air conditioning is turned on, it may be due to friction in the air conditioning belt; 4. If the noise is present only during the initial moment of cold start, it could be a fault in the starter motor, primarily caused by poor return of the starter gear, inadequate lubrication of the one-way clutch, or slow return of the gear being dragged back by the flywheel. This phenomenon is more common in winter.
2
5
Share

What documents are needed for annual inspection by a non-owner?

If a non-owner goes to the vehicle management office to handle the annual inspection of the vehicle, they need to bring the vehicle registration certificate, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or tax exemption certificate, and motor vehicle safety technical inspection qualification certificate. Below is the relevant introduction to the annual inspection: 1. Time: According to Article 49 of the "Regulations on the Registration of Motor Vehicles", the owner of the motor vehicle can apply for the inspection qualification mark to the vehicle management office at the place of registration within three months before the expiration of the validity period of the motor vehicle inspection. 2. Notes: Before applying, the owner of the motor vehicle should complete the handling of road traffic violations and accidents related to the vehicle.
2
1
Share

What is the displacement of a 1.2t engine?

1.2t is equivalent to the displacement of a 1.6-liter naturally aspirated engine. Automobile displacement refers to the sum of the cylinder working volume and the combustion chamber volume, usually measured in liters. The displacement of a mini car is less than or equal to 1.0L; the displacement of a compact car ranges from 1.0 to 1.6L; the displacement of a mid-size car ranges from 1.6 to 2.5L; the displacement of a full-size car ranges from 2.5 to 4.0L; the displacement of a luxury car is greater than 4.0L. Engine displacement is one of the most important structural parameters, more representative of engine size than bore and number of cylinders. Many engine performance indicators are closely related to displacement. Generally, a larger displacement means the engine releases more energy per unit time (converting chemical energy from fuel into mechanical energy), resulting in better "power performance."
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.