What are the differences between Haval F7x and F7?

Can I Claim Depreciation Loss for a Scratched Car?

You cannot claim depreciation loss for a scratched car. Here is additional information: Meaning of Vehicle Depreciation: It is the financial representation of vehicle investment recovery, where a certain amount of funds is allocated annually to update vehicles and maintain transportation reproduction. Vehicle Depreciation Calculation Methods: Average calculation methods (straight-line method and units-of-production method): Straight-line method formula: Annual depreciation = Original value / Estimated useful life. Units-of-production method formula: Depreciation is calculated based on the distance traveled, depreciation = Original value (distance already traveled / estimated total distance). Accelerated depreciation methods (double-declining balance method and sum-of-the-years'-digits method): Double-declining balance method formula: Depreciation percentage = 2 / Estimated useful life. Annual depreciation = Beginning-of-year value (depreciation percentage). In the last two years of the estimated useful life, the remaining value is evenly distributed. Sum-of-the-years'-digits method formula: Depreciation = Original value (remaining useful life / sum of the years' digits).

11

1

Share

What is the fuel tank capacity of the Geely Boyue?

Geely Boyue offers a total of 7 models, all with a fuel tank capacity of 58 liters. The vehicle is equipped with a 1.8-liter turbocharged engine and comes with two transmission options: a 7-speed wet dual-clutch transmission and a 6-speed manual transmission. During the actual refueling process, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity specified by the automaker is measured from the bottom of the tank to the safety level, and there is additional space from the safety level to the tank opening. This space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle approaches E, it indicates low fuel, while nearing F means the fuel level is sufficient.

16

0

Share

Must the vehicle license be under the borrower's name when purchasing a car with a loan?

Must the vehicle license be under the borrower's name when purchasing a car with a loan? The conditions for purchasing a car with a loan are as follows: Age and legal capacity: The car buyer must be at least 18 years old and a Chinese citizen with full civil capacity. Stable assets: The car buyer must have a relatively stable job and a stable economic income or possess assets that are easily convertible to cash, capable of repaying the loan principal and interest on schedule. Provide guarantee: Provide a guarantee recognized by the bank. If the buyer's household registration is not local, they must also provide joint liability guarantee. Account balance below the down payment: During the loan application period, the car buyer must deposit an amount below the bank-specified down payment for the car purchase in the designated savings account at the bank handling the loan.

16

0

Share

Is Earlier Turbo Boost Intervention Always Better?

Turbine boost intervention is not necessarily the earlier the better. It should be balanced according to the engine's displacement and positioning. The earlier the turbo boost, the smaller the lag and the faster the pressure builds up, but relatively speaking, the boost effect is slightly worse, which is not conducive to high-power output. More relevant information is as follows: 1. Electronic injection engine: Whether it is naturally aspirated or turbocharged, its essence still belongs to the electronic injection engine, and it still follows the principle of the electronic injection engine. The intake air volume is detected by the air flow sensor and intake air temperature sensor, the oxygen content in the exhaust gas is monitored by the oxygen sensor, and then the engine's ECU calculates the actual fuel injection amount according to various sensors and controls the fuel injection pulse width of the fuel injector, ultimately maintaining the engine's air-fuel ratio within a reasonable range. 2. The principle of turbocharged engine: The engine is a heat engine. In theory, burning more fuel will output greater power, but in the era of naturally aspirated engines, the intake air volume was limited by physical displacement and could not be further improved. Therefore, turbocharging came into being.

12

4

Share

How Long Can a Brushed Wheel Hub Last?

Automotive brushed wheel hubs can be repaired multiple times without a specific limit, and the number of repairs does not affect their performance. Below is relevant information about wheel hubs: Introduction: A wheel hub is the rotating part of the wheel steel connected by pillars within the tire, i.e., the metal component mounted on the axle that supports the tire. It is also called a wheel rim, steel rim, or tire ring. Wheel hubs come in various types based on diameter, width, manufacturing method, and material. Types of Wheel Hubs: Wheel hubs are also known as wheel rims. Depending on the characteristics and requirements of different vehicle models, the surface treatment processes for wheel hubs vary and can generally be divided into two types: painting and electroplating. For ordinary vehicle models, less consideration is given to the appearance of the wheel hubs, with good heat dissipation being a basic requirement. The process typically involves painting, which includes spraying followed by baking, as it is cost-effective, provides vibrant colors, and ensures long-lasting durability. Even when the vehicle is scrapped, the color of the wheel hub remains unchanged.

13

4

Share

What is the difference between BMW 740 and 730?

BMW 740 and 730 differences are introduced as follows: 1. In terms of power, the BMW 740 is equipped with a 3.0-liter 6-cylinder turbocharged engine, with a maximum horsepower of 340 hp, maximum power of 250 kW, and maximum torque of 450 N·m. The BMW 730 is equipped with a 2.0-liter 4-cylinder turbocharged engine, with a maximum horsepower of 265 hp, maximum power of 195 kW, and maximum torque of 400 N·m. 2. In terms of configuration, the BMW 740 is more richly equipped. Compared to the BMW 730, the BMW 740 adds features such as lane departure warning system, lane keeping assist system, road traffic sign recognition system, 360-degree panoramic imaging, full-speed adaptive cruise control, integral active steering system, car networking system, rear LCD display screen, laser headlights, and more. Additionally, the BMW 740 comes standard with 20-inch wheels, while the BMW 730 uses 19-inch wheels. 3. In terms of drivetrain, the BMW 730 is rear-wheel drive across all models, while the BMW 740 offers both rear-wheel drive and four-wheel drive versions.

18

3

Share

What are the differences between Haval F7x and F7?

Can I Claim Depreciation Loss for a Scratched Car?

What is the fuel tank capacity of the Geely Boyue?

Must the vehicle license be under the borrower's name when purchasing a car with a loan?

Is Earlier Turbo Boost Intervention Always Better?

How Long Can a Brushed Wheel Hub Last?

What is the difference between BMW 740 and 730?

Does a discrepancy between the driving license address and ID card address affect vehicle inspection?

Why is the Elantra's heater not producing hot air?

Where to Add Windshield Washer Fluid for Geely Vision S1?

What is the historical development process of Changan Automobile?