What are the differences between BMW 330 and 320?

1 Answers
HazelDella
07/29/25 4:40pm
The differences between BMW 330 and 320 lie in the engine model, transmission, and dimensions. Below are the details regarding the differences between BMW 330 and 320: Different Engine Models: The BMW 330 is equipped with a B48 model 2.0T engine; the BMW 320 is equipped with a four-cylinder engine. Different Transmissions: The BMW 330 uses a ZF 8AT Steptronic automatic transmission; the BMW 320 uses a 6-speed automatic transmission. Different Dimensions: The BMW 330 measures 4719mm in length, 1827mm in width, and 1459mm in height, with a wheelbase of 2851mm; the BMW 320 measures 4829mm in length, 1827mm in width, and 1463mm in height, with a wheelbase of 2961mm.
Was this review help?
17
1
Share
More Forum Discussions

Can the hood be partially repainted?

Can the hood be partially repainted? The following is relevant content introduction: 1. If it is a light-colored touch-up paint, such as pearl white, materials like silver powder will be added to increase the thickness and smoothness of the paint surface. It is difficult for this type of color to match the original paint, and the touch-up area will be easily noticeable with a significant color difference. 2. The car hood can be maintained through polishing. The functions of polishing: remove the oxidized layer on the paint surface and shallow scratches. Polishing force principle: use medium to high pressure initially to ensure good cutting power of the wax, then reduce pressure for the final finishing; the polishing area should be within an arm's length, and residual wax spots should be wiped off promptly after polishing.
12
0
Share

What Octane Gasoline Should the Golf 8 Use?

The Golf 8 equipped with a naturally aspirated engine can use 92-octane gasoline, while the Golf 8 with a turbocharged engine must use 95-octane gasoline. Precautions for refueling: Avoid overfilling the tank: If the tank is filled too full, the high temperatures in summer combined with the heat generated by the car itself can cause the gasoline to expand. To prevent the fuel tank from being damaged by the expanding gasoline, there is a vent hole. If the tank is overfilled, gasoline may overflow through the vent hole, which can lead to spontaneous combustion if exposed to an open flame, with potentially disastrous consequences. Additionally, gasoline overflowing through the vent hole can drip onto the car body, causing corrosion. Fuel additives: Gas station attendants often recommend adding fuel additives when refueling. However, fuel additives cannot fundamentally solve the problem of engine carbon buildup, so it is best to avoid using them. Beware of static electricity: During winter, the dry climate can easily generate static electricity. Therefore, it is essential to guard against static electricity when refueling in winter to prevent serious consequences.
16
3
Share

What is the optimal tire pressure for sedans on highways?

Generally, in summer, the front tires should be at 2.3 kg, and the rear tires at 2.5 kg; in winter, the front tires should be at 2.5 kg, and the rear tires at 2.7 kg. The specific pressure depends on the vehicle model. Below is some information about sedan tire pressure: 1. Tire pressure: "Tire pressure" refers to the air pressure inside the tire. Both overinflation and underinflation can affect the tire's lifespan. Underinflation increases tire deformation, leading to cracks on the sidewalls, enlarges the contact area with the ground, accelerates shoulder wear, and increases fuel consumption. 2. Precautions: Maintaining proper tire inflation provides the best combination of handling, tread life, and driving comfort. It is recommended to check tire pressure regularly, including the spare tire. Even well-maintained tires can lose 10-20 kPa per month, so regular checks are essential.
2
4
Share

Where is the tire pressure reset for the Lynk & Co 06?

The tire pressure reset button for the Lynk & Co 06 is located on the left control lever, marked with a SET key. Press it once, then select the reset option. A prompt will indicate the start of tire pressure learning, after which you can use the reset tool to complete the process. Tire Pressure Reset: Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing a tire pressure fault. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep." Release the button, and the tire pressure monitoring system will store the current normal tire pressure data, automatically clearing the previous data. Finally, the fault light on the dashboard will turn off, indicating the completion of the tire pressure reset. Low Tire Pressure: If no visible damage is found, simply inflate the tire to the normal pressure and reset the tire pressure system. If a puncture is detected during inspection, drive to a tire shop promptly for repair, then reinflate the tire. If the low tire pressure warning reappears after inflation without any punctures, it might be due to air leakage caused by a deformed wheel rim. In this case, inspect the wheel rim and consider replacing it.
14
4
Share

What are the reasons for the Mitsubishi Pajero V73's lack of power when climbing slopes?

Mitsubishi Pajero V73's lack of power when climbing slopes may be due to decreased combustion efficiency, spark plug failure, and other reasons. Below are detailed explanations for the lack of power when climbing slopes: Decreased Combustion Efficiency: The main reason for the feeling of powerlessness when a car climbs a slope is that the engine does not have enough fuel during the climb, leading to decreased combustion efficiency and insufficient horsepower. Similarly, the intake system plays a crucial role. Besides fuel, the engine also requires air. If components like the air filter or throttle are clogged or malfunctioning, resulting in insufficient air intake, it can also cause the car to lack power when climbing slopes. Spark Plug Failure: Spark plugs are also a common source of problems. Issues such as excessive spark plug gap or incorrect heat value can lead to poor engine combustion, subsequently causing the car to lack acceleration power when climbing slopes. Additionally, insufficient tire pressure can contribute to the car's lack of power when climbing. It is advisable to check the tire pressure. Malfunctions in any of these components can potentially lead to the car's lack of acceleration power.
1
2
Share

What are the models of Koenigsegg?

There are the following three models: AgeraRS. The Griffin sports car boasts excellent aerodynamic performance, with the new car constructed using a large amount of lightweight materials. It is reported that the carbon fiber body weighs only 1395 kilograms. The powertrain of the new car is a biturbo V8 5.0T twin-turbo hybrid engine, with a maximum power output of 1360 horsepower (1014 kilowatts) for the AgeraRS, and a top speed of 400 kilometers per hour. It should be noted that the tailpipe at the rear of the car is not an exhaust outlet but a battery cooling vent. CCXRTrevita. Equipped with a 4.7L V8 engine, it has a top speed of 254 miles per hour and a maximum power output of 1018 horsepower. Its body incorporates its unique carbon fiber diamond weaving technology. Regera. This car is built with new lightweight materials, with an overall weight of around 1420kg. It is also a hybrid model, offering pure electric mode driving. However, its built-in battery pack has a capacity of only 9.27kWh, allowing for a pure electric range of only 50km.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.