What are the differences between Audi A7 and A7L?

1 Answers
McEmerson
07/28/25 4:09pm
Here are the differences between Audi A7 and A7L: 1. Exterior differences: The domestic version of the Audi A7L does not feature a fastback-style design on the side profile; the A7 has a fastback-style design with a more raised rear end. 2. Size differences: The A7L measures 5076mm in length, 1908mm in width, and 1429mm in height, with a wheelbase of 3026mm. Compared to the A7, the vehicle's length is increased by 100mm, and the wheelbase is extended by 98mm. Other differences are as follows: 1. Configuration differences: The new domestic version of the Audi A7L will have more abundant configurations than the imported A7, including 21-inch RS racing wheels, DAWS dynamic all-wheel steering system, active air suspension, and intelligent quattro four-wheel drive technology. 2. Power differences: SAIC Audi has currently only announced the power parameters for the 55TFSI-Quattro Pioneer Edition model, which is equipped with a 3.0T turbocharged engine paired with a 7-speed wet dual-clutch transmission. With the support of a 48V mild hybrid system, the vehicle delivers a maximum horsepower of 340 and a peak torque of 500 Nm, surpassing the power of the currently available imported A7 models.
Was this review help?
5
4
Share
More Forum Discussions

How many questions are there in Subject 4 and what is the total score?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the written test for obtaining a driver's license (Subject 1) consists of 100 questions, divided into single-choice and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the exam, the system will automatically submit the test and end the session. Subject 1, also known as the theoretical test or driver's theory exam, is part of the motor vehicle driver's license assessment. The exam content includes driving theory fundamentals, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. Subject 1 exam content: Driver's license and motor vehicle management regulations; Road traffic conditions and rules; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should pay attention to their attire—no sandals are allowed, and electronic devices and bags are prohibited in the exam hall. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the exam hall. Upon entering, verify your identity at the assigned station, find your seat, and begin the exam. Ensure the camera is properly aligned and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign renders the result invalid. There is no limit to the number of times you can schedule Subject 1. Each subject allows one exam attempt, with one retake if you fail. If you skip the retake or fail it, the exam session ends, and you must reschedule. In contrast, Subjects 2 and 3 allow only five exam attempts, with scheduling permitted ten days after a failed attempt. If you fail the Subject 3 safe and civilized driving knowledge test, your previously passed road driving skills scores remain valid. The driver's license test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 covers road traffic safety laws, regulations, and related knowledge. Subject 2 is the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge.
3
2
Share

What is the standard for drunk driving?

Drunk driving standard is equal to or greater than 80 milligrams per 100 milliliters. Drunk driving refers to the traffic violation of operating a motor vehicle while completely or partially losing personal will due to alcohol consumption. Drunk driving standard: The standard for drunk driving is greater than or equal to 80 milligrams per 100 milliliters. For every 100 milliliters of blood, an alcohol content of 20 to 79 milligrams is considered drinking and driving; an alcohol content of 80 milligrams or above is considered drunk driving. Drinking and driving: Also known as drunk driving, it refers to controlling and operating a motor vehicle under the influence of alcohol or alcoholic beverages. Drunk driving affects safe driving ability and significantly increases the risk of accidents. In criminal law, it is considered a category of conscious negligence, meaning foreseeing that the incident could happen but believing it would not occur and thus taking no precautions.
18
2
Share

How to use ETC during highway toll-free periods?

During highway toll-free periods, the ETC passage methods are: 1. Enter through ETC lane and exit through ETC lane - no charge; 2. Enter through manual lane and exit through manual lane - no charge; 3. Enter through manual lane and exit through ETC lane - no entry information, exit barrier won't lift and vehicle cannot exit; 4. Enter through ETC lane and exit through manual lane - passable without charge. ETC is an Electronic Toll Collection system for automatic toll collection on highways or bridges. It uses dedicated short-range communication between the onboard unit installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations, combined with computer networking technology for backend settlement processing with banks, achieving the purpose of vehicles paying highway or bridge tolls without stopping at toll stations.
15
2
Share

What are the causes of Jaguar XJ turbocharger failure?

Jaguar XJ turbocharger failures can be caused by oil leakage or compressor end oil leakage in the turbocharger. Specific details are as follows: Oil leakage: High oil consumption with normal exhaust color and no power loss; usually caused by oil leakage. Solution: Check the external oil pipes of the engine lubrication system for leaks. Compressor end oil leakage: High oil consumption with blue smoke from the exhaust but no power loss; occurs when oil leaks from the compressor end of the turbocharger and enters the combustion chamber through the engine intake pipe to be burned. If the turbocharger oil return pipe is blocked, excessive oil accumulates at the intermediate support of the rotor assembly and flows along the rotor shaft into the compressor impeller. Solution: Inspect the compressor outlet or engine intake pipe for oil residue on the pipe opening or walls.
11
4
Share

Is It a Big Mistake to Press the Clutch Before Braking?

Pressing the clutch before braking is indeed a big mistake. Most drivers of manual transmission cars believe that pressing the clutch before braking can cut off the power, making the braking more effective. However, this practice can lead to serious issues. When the clutch is pressed, the engine speed drops to idle, and the vacuum in the intake manifold decreases. As a result, the assistance from the vacuum booster diminishes sharply, leading to an extended braking distance. The correct braking method should be: during emergency braking, only press the brake pedal. At this point, both the braking system and engine braking work together to reduce the vehicle speed to a safe and controllable level. If you need to continue braking, then press the clutch pedal and choose the appropriate gear based on the situation, either disengaging or engaging the clutch. This is known as anticipatory braking, which allows the vehicle to stop more smoothly. In emergency situations, immediate braking is the key.
5
2
Share

How Long Does It Take to Charge a Tesla?

Tesla charging takes about 10 to 12 hours. It is recommended to charge when the battery level is between 5% to 10% and stop charging when it reaches 90% to 95%. Charging Speed: Tesla's dedicated charging station provides a charging speed of 74 km per hour, taking six to seven hours for a full charge. National standard fast charging at gas stations offers a speed of 250 km per hour, taking about two hours for a full charge. Tesla's Supercharger provides a speed of 700 km per hour, taking about one hour for a full charge. Disadvantages of Fast Charging: Fast charging saves a lot of time compared to slow charging, but it can have a certain impact on battery lifespan. If not particularly necessary, it is recommended to use fast charging as little as possible. Even if fast charging is needed, avoid frequent use.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.