What Are the Consequences of Using One Driver's License for Four Vehicles?

1 Answers
StPaisley
07/30/25 2:19am
A single vehicle cannot use four driver's licenses to handle traffic violation points. Below is an introduction to the consequences of using one driver's license for four vehicles: Relevant regulations: According to the "Road Traffic Safety Law of the People's Republic of China," the "Administrative Measures for Motor Vehicle Driver's Licenses of the People's Republic of China," and the "Measures for Handling Motor Vehicle Traffic Violations," a single vehicle can have a maximum of three drivers accepting point deductions. Suspect identification: If more than three drivers (excluding the owner or manager of the motor vehicle) accept electronic police processing for the same license plate vehicle within one year, the system will automatically flag the fourth driver as a suspected point trafficker.
Was this review help?
1
3
Share
More Forum Discussions

How Many Kilometers Can Tires Run?

Tires can typically run for 60,000 to 80,000 kilometers under normal usage, but the exact distance depends on local road conditions and specific usage. The replacement criteria and maintenance methods for tires are as follows: Tire Replacement Criteria: New tires have wear indicators in their grooves. Once these indicators become visible, the tires should be replaced as soon as possible. Overused tires can lead to dangerous skidding, resulting in poor braking or even rollovers. If steel cords are exposed or the rubber is cracked during use, the tires are no longer safe and must be replaced immediately. Additionally, bulges or dents also require immediate replacement. Tire Maintenance Methods: Tires naturally age over time with use. To prolong their lifespan, avoid exposure to acidic or alkaline substances, strictly prohibit overloading or speeding, regularly check tire inflation pressure, and avoid sharp-angle squeezing, driving over roadbeds, or curbs.
7
2
Share

Does the BMW 530 Comply with China 6 Emission Standards?

BMW 530 complies with China 6 emission standards. The differences between China 5 and China 6 are as follows: 1. Different Emission Labels: The label for China 5 emission standard is "V", while the label for China 6 emission standard is "VI". 2. Different Emission Standards: The emission control level of China 5 standard is equivalent to the European Union's 5th stage emission standard, which has been implemented since 2009. It imposes stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter emitted by vehicles. Each upgrade from China 1 to China 5 reduces vehicle pollution by 30% to 50%. The China 6 emission standard is more than 30% stricter than China 5. Under the same driving conditions and test methods, the carbon monoxide emissions of gasoline vehicles are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. 3. Different Implementation Times: The China 5 emission standard for motor vehicle pollutants was implemented nationwide from January 1, 2017. On December 23, 2016, the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine issued the "Limits and Measurement Methods for Emissions from Light-duty Vehicles (China 6)", which was implemented from July 1, 2020.
19
1
Share

Where is the Mercedes-Benz engine 264920 produced?

Mercedes-Benz engine 264920 is an imported engine, manufactured in Germany. Below is an introduction to the Mercedes-Benz engine related content: Engine model: The Mercedes-Benz E300 uses a low-power version of the 2.0-liter turbocharged engine, with the engine code 264920. The Mercedes-Benz E-Class is a mid-to-large-sized sedan under the Mercedes-Benz brand. This model has been domestically produced, and the domestic version uses three engines in total: a 1.5-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. Engine power: The 1.5-liter turbocharged engine has a maximum power of 184 horsepower and a maximum torque of 280 Nm. This engine can output maximum power at 6100 rpm and maximum torque at 3000 to 4000 rpm. This engine is equipped with a 48V mild hybrid system and direct fuel injection technology.
11
1
Share

Where is the engine fuel injector located?

The fuel injector is generally installed on the intake manifold or the cylinder block for direct injection. The causes and effects of fuel injector clogging are as follows: Causes of fuel injector clogging: Clogging occurs due to carbon deposits from the engine accumulating on the fuel injector or impurities in the fuel blocking the injector's pathways. After driving for a period, the fuel system will develop certain deposits. These deposits accumulate on the fuel injector, intake valves, and other components, turning into hard carbon deposits during engine combustion. Effects of fuel injector clogging: Clogged fuel injectors can impair the performance of precision components in the electronic injection system, leading to reduced power output. Deposits can form carbon buildup on the intake valves, causing unstable engine idling, increased fuel consumption, and worsening exhaust emissions. It may also lead to engine knocking and other malfunctions.
4
2
Share

How Many Liters of Engine Oil Does a Car Need?

Car engine oil capacity is generally 5 liters. The capacity for oil change and situations requiring oil change are as follows: Oil change capacity: Different car models have different sizes of oil pans, so the amount of oil required for a change varies. Generally, compact cars need about 4L, mid-size and large cars about 4.5L, and micro cars about 3.5L. Please refer to the maintenance manual for specific details. Situations requiring oil change: Check the oil viscosity; if there is no viscosity, the oil needs to be changed; the oil color turns black; excessive black particles, metal shavings, or carbon deposits in the oil; the oil smells unusual. If the oil is not changed, it will turn black and deteriorate, reducing lubrication effectiveness and potentially causing engine damage.
2
1
Share

What are the body dimensions of the BMW X3?

The BMW X3 has a body length of 4717mm, width of 1891mm, height of 1689mm, and a wheelbase of 2864mm. Below is some knowledge about the exterior and interior of the BMW X3: Exterior: The BMW X3 features a bold and sporty design with its signature kidney grille at the front. The blacked-out grille paired with exquisite chrome trim enhances the layered appearance of the front fascia. The side profile showcases smooth yet sharp lines, complemented by wheel arch vents for a more athletic look. The sleek and aggressive headlights on both sides add to its striking visual appeal when illuminated. The overall side profile is sporty, with a streamlined shape and wheel designs that contribute to a more elongated and dynamic appearance. The rear design, including the LED combination taillights, offers high visibility when lit. Interior: The BMW X3 maintains the brand's SUV tradition with an asymmetrical dashboard layout that emphasizes control and sportiness. Additionally, interior details have been refined, featuring extensive soft-touch materials, abundant black piano lacquer, and silver chrome accents, creating a premium feel upon entering the cabin. The 2020 X3 focuses on configuration upgrades, introducing the highly anticipated new ID7 system, a full LCD instrument panel, a floating multimedia display, standard professional connectivity suite, and optional Harman Kardon audio system.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.