What are the consequences of not changing automatic transmission fluid?

Should New Tires Be Installed on the Front or Rear?

Deciding which axle to install new tires on depends on various factors, as tire manufacturers have different recommendations. The choice should be based on your specific vehicle. Below are the relevant details: 1. Kumho Tires: The official website recommends installing the better tires on the front axle, which aligns with the mainstream opinion among most car enthusiasts online. The reason is that most family cars are front-wheel-drive structures. 2. Michelin: The official website suggests installing new tires on the rear axle, as new tires offer better wet-road grip compared to old ones. Additionally, installing new tires on the rear axle reduces the risk of the vehicle fishtailing on slippery roads. 3. The driving environment determines the installation axle: (1) Most mainstream family vehicles use front-wheel-drive structures, where the front wheels handle both driving and steering and bear over 70% of the braking force. As a result, under normal conditions, the front tires wear out faster and are more prone to blowouts. A front tire blowout can severely affect steering, leading to loss of control and potential rollover accidents. Therefore, most people choose to install new tires on the front axle. (2) The main risk for rear tires is not blowouts but skidding and fishtailing. Loss of rear tire grip is a primary cause of oversteering, and heavily worn old tires are more likely to lose grip. This is why Michelin recommends installing new tires on the rear axle.

18

2

Share

How Many Years Can You Learn to Get a Driver's License?

According to the Ministry of Public Security Order No. 139 in 2016: The results of learning to drive and taking the driver's license test are called the Learning Driving Certificate, and the validity period of the results is 3 years. All subjects must be completed within three years, otherwise they will become invalid. The time of the Learning Driving Certificate is calculated from the day of the subject one test. Specific time arrangement for obtaining a driver's license: 1. Subject One: In many places, the time required to learn subject one is about 1 month. However, in practice, many people self-study for subject one, and the time spent is not that long, but the regulations stipulate so. 2. Subject Two: After passing subject one, subject two naturally requires learning, and the regulation is about 20 days. In reality, many people spend far more than 20 days on subject two. 3. Subject Three: After passing subject two, the road test for subject three requires a certain amount of time to practice, and the regulation is about 10 days. However, in practice, many people's practice time varies. 4. Subject Four: After passing subject three, you can take subject four after 3 days. Passing subject four will result in the issuance of a driver's license. According to the required progress, the total time to obtain the entire driver's license is actually no less than 50 days.

6

5

Share

Can the car still be driven when the wrench light is on?

The car can still be driven when the small wrench light is on, but it is necessary to go to the 4S store for maintenance as soon as possible to prevent potential faults in the car. If the car has not been maintained for a long time, some brands of models will display the small wrench light. There is no need to worry about any faults when the small wrench appears; it is just a reminder for the owner to go to the 4S store for maintenance. Below are the relevant details: 1. How much longer can the car be driven with the wrench light on: Because the maintenance reminder cycle is set when the car leaves the factory, the small wrench usually indicates that the car has traveled 5,000 kilometers and needs maintenance. The dashboard settings will remind the owner in advance. Typically, the car maintenance cycle is 5,000 to 8,000 kilometers, so the car can still be driven for 1,000 to 2,000 kilometers. 2. Maintenance cycle: Because car maintenance is determined by time or mileage, whichever comes first will determine the maintenance date, approximately once every six months. 3. How to eliminate the wrench light: After the small wrench appears on the dashboard, but there is no time for maintenance yet, and you don’t want to see the small wrench or the maintenance reminder text on the dashboard, you can reset it yourself. Turn the key to the power-on state, press and hold the button on the dashboard for 10 to 15 seconds without releasing, and the small wrench will be eliminated.

15

2

Share

The Difference Between Mobile Radios and Handheld Radios

The transmission power is different. Handheld radios generally have a transmission power of no more than 5W, while mobile radios typically exceed 20W. Additionally, in terms of communication range, handheld radios have a shorter range, reaching approximately 1-6 kilometers in open plains. Mobile radios, on the other hand, have a much longer communication range, with a transmission distance of over 10 kilometers under normal, unobstructed conditions. Below are some related details: 1. Mobile Radios: A mobile radio, also known as a car-mounted walkie-talkie, is installed in a vehicle. Handheld radios are portable and convenient, with a relatively smaller size. Both mobile and handheld radios can communicate with each other, provided they are on the same frequency. Mobile radios have higher transmission power, making them ideal for leading vehicles to scout routes or trailing vehicles to maintain order. 2. Handheld Radios: Handheld radios are used in the middle of the convoy to listen to road conditions and ensure smooth driving. They can maintain communication within a few kilometers. If a vehicle falls too far behind, the handheld radio can still receive signals to stay updated on the group's movements. Mobile radios have a larger emergency call range, but since phone signals are usually available along highways, they are more useful in mountainous areas. However, if one must hitchhike to seek help, the radio cannot be carried along. Handheld radios have a smaller emergency call range, but climbing to a higher elevation may improve the signal. They are portable, and switching to a high-power battery can extend the range, preventing users from getting lost.

11

5

Share

What is the function of a car air filter?

Function of the air filter: It filters out particulate impurities in the air, ensuring that a sufficient amount of clean air enters the cylinder, preventing floating dust in the air from being sucked into the engine, which accelerates the wear of the piston group and cylinder. According to the car's maintenance manual, the air filter should generally be replaced every 10,000 to 20,000 kilometers or every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the formation of throttle sludge. The position of the car's air filter element is determined by the intake form and the structure of the engine. It is usually located in the air filter on the engine intake pipe. There are two types of air filters in cars: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of metal mesh. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or style. It is mainly used in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filter. During operation, the engine sucks in a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinder, accelerating the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly serious in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring that a sufficient amount of clean air enters the cylinder. Using an excessively dirty air filter in a car can cause insufficient engine intake, incomplete fuel combustion, leading to unstable engine operation, reduced power, and increased fuel consumption. Therefore, the car must keep the air filter clean. The car air cleaner is a device that removes particulate impurities from the air, consisting of one or several air filter components. Its main function is to filter out harmful impurities in the air that are about to enter the cylinder, reducing early wear of the cylinder, piston, piston rings, valves, and valve seats. Therefore, before the air enters the cylinder, it must first pass through the fine filtration of the air cleaner. An excessively dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have little dust and is lightly clogged, it can be cleaned by blowing high-pressure air from the inside out and continue to be used. An excessively dirty air filter should be replaced promptly.

3

1

Share

How to Check if Car Tire Pressure is Normal?

The four tires of a car all have tread patterns. Generally, when the tire pressure is normal, 5-6 outer tread blocks will be in contact with the ground. If the tire pressure is too low, more tread blocks will contact the ground. If the tire pressure is too high, fewer tread blocks will contact the ground. Both excessively high and low tire pressures pose safety hazards. Below are relevant details: 1. Definition of Tire Pressure: Strictly speaking, tire pressure refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car—its damage can lead to the end of the car's life. Similarly, tire pressure is like the car's blood pressure, as its level significantly impacts the car's performance and power. 2. Standard Tire Pressure: Generally, 2.3-2.5 bar is the normal range for tire pressure. However, the standard tire pressure may vary depending on the car model. Additionally, tire pressure can be influenced by factors such as seasonal temperature, driving conditions, and vehicle load. Therefore, the normal range for tire pressure is not fixed. The standard tire pressure can usually be found in the car's user manual, on the label near the driver's door (B-pillar), in the drawer next to the driver's seat, or on the fuel tank cap. 3. Hazards of Overinflated and Underinflated Tires: (1) Overinflated Tires: Reduces the contact area between the tire and the ground, increasing pressure and wear per unit area. This can lead to loss of braking control, reduced grip during turns, and potential tire bursts when encountering road bumps or potholes, damaging the car's suspension system. (2) Underinflated Tires: Increases the contact area between the tire and the ground, causing abnormal temperature rises inside the tire during driving. Additionally, severe deformation of the tire sidewalls accelerates the aging of internal steel belts and fabric layers, increasing the risk of blowouts. It also leads to higher fuel consumption and reduced tire lifespan.

17

3

Share

What are the consequences of not changing automatic transmission fluid?

Should New Tires Be Installed on the Front or Rear?

How Many Years Can You Learn to Get a Driver's License?

Can the car still be driven when the wrench light is on?

The Difference Between Mobile Radios and Handheld Radios

What is the function of a car air filter?

How to Check if Car Tire Pressure is Normal?

What causes the electric power steering system indicator light to come on?

Can I use my household registration booklet for the driving school exam?

Can I learn to drive with an A3 license as a beginner?

What to Pay Attention to When Choosing a Driving School?