What are the causes of the sunroof rattling in the 2018 Sagitar?

2 Answers
DiSawyer
07/29/25 4:01am
The causes of the sunroof rattling in the 2018 Sagitar are: 1. Presence of impurities in the sunroof sliding track; 2. Loose sunroof screws; 3. Aging of the sealing strip. The functions of the sunroof are: 1. To release toxic gases inside the vehicle; 2. To prevent exhaust fumes from entering; 3. To lower the interior temperature; 4. To effectively reduce wind noise; 5. To eliminate fogging. The maintenance methods for the sunroof include: 1. Regularly checking the condition of the sunroof guide rails; 2. Reducing the frequency of sunroof use; 3. Avoiding opening the sunroof when the car is cold in winter; 4. Checking the drainage status of the sunroof before the rainy season. The 2018 Sagitar is a compact car with body dimensions of: length 4753mm, width 1800mm, height 1462mm, a wheelbase of 2731mm, and a fuel tank capacity of 50 liters.
Was this review help?
16
4
Share
James
08/12/25 7:47am
I've been driving for over a decade, and sunroof rattles are all too common. For older models like the 2018 Sagitar, it's usually due to dust buildup in the tracks or small stones stuck in the gaps. I've personally experienced hardened weatherstripping before - it sounded like sandpaper rubbing when driving. Track deformation is another possibility, especially if the roof has been hit by falling branches. Another common cause is loose sunroof bracket screws that creak on rough roads. My advice: first clean the tracks with a small brush and apply silicone grease made for windows. If the noise persists, check the weatherstripping's elasticity or have a mechanic sit on the roof (on flat ground) to locate the rattle. Never wait until it starts leaking to fix it - that's when real trouble begins.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

What welding rod or wire should be used for 310s?

310S stainless steel should be welded using ER-310 welding wire or A402 welding rod. 310S (0Cr25Ni20) is an austenitic chromium-nickel stainless steel with excellent oxidation resistance and corrosion resistance. Due to its high percentage of chromium and nickel, 310S has much better creep strength and can operate continuously at high temperatures, exhibiting good high-temperature resistance. More details are as follows: Advantages of 310S stainless steel: 310S stainless steel has good high-temperature resistance. When the temperature exceeds 800°C, it begins to soften, and the allowable stress starts to decrease continuously. The maximum service temperature is 1200°C. ER310 stainless steel welding wire: ER310 stainless steel welding wire, with a molten metal composition of 25Cr-20Ni, is mostly used for welding 310S stainless steel. It is suitable for welding dissimilar metals and alloy steels and high-carbon steels with high self-hardening properties.
20
3
Share

Will I be fined if I drive without an insurance sticker but have an electronic insurance policy?

You will not be fined or have points deducted because since 2018, China has abolished the regulation that vehicles must display an insurance sticker. Now, the insurance sticker does not need to be affixed to the front windshield. Uniformly changed to electronic insurance policies: Due to the upgrade in the functionality of electronic insurance policies, the car insurance purchased by vehicle owners now no longer comes with an insurance sticker. It has been uniformly changed to an electronic insurance policy. Traffic police can check the electronic insurance policy in the system, which is convenient and fast. Therefore, there is no need to affix that unsightly and vision-obstructing insurance sticker anymore. Things to note: However, it is important to note that not needing to display an insurance sticker does not mean you don’t need to purchase insurance. Insurance is still mandatory. It’s just that electronic insurance policies have replaced the previous insurance stickers.
8
2
Share

What kind of oil is steering oil?

Steering oil is actually hydraulic oil, with a crucial indicator being its low-temperature fluidity. Introduction to Hydraulic Oil: Hydraulic oil is the hydraulic medium used in hydraulic systems that utilize liquid pressure energy. It plays roles in energy transmission, wear resistance, system lubrication, anti-corrosion, anti-rust, and cooling within the hydraulic system. For hydraulic oil, it must first meet the viscosity requirements of the hydraulic equipment at both operating and starting temperatures. Since changes in the viscosity of lubricating oil are directly related to hydraulic action, transmission efficiency, and precision, the oil's viscosity-temperature performance and shear stability must also meet various demands posed by different applications. Oil Change Interval: Generally, automobile manufacturers do not strictly specify the interval for changing steering oil. Most automotive maintenance and repair shops refer to other service providers in the industry, learning from each other to improve. To prevent the steering oil from becoming excessively dirty or deteriorating due to other factors, it is recommended to change the steering oil every 40,000 kilometers or every 2-3 years.
2
3
Share

What procedures are required for new car maintenance?

New car maintenance requires bringing the vehicle registration certificate and the maintenance manual. Check if there is a 4S store's stamp in the new car: If purchased from a 4S store, check whether the maintenance manual has the 4S store's stamp. If it does, bring the free first maintenance card. If the maintenance manual does not have the 4S store's stamp, you will have to drive to the store where you bought the car for maintenance with the free first maintenance card. Generally, the first maintenance is free when purchasing a car. Precautions for new car maintenance: When performing the first maintenance on the car, be sure to bring the car quality guarantee certificate, which proves that the car has a quality guarantee. At the same time, the quality guarantee certificate contains the car's first maintenance card. This first maintenance card will be taken back by the 4S store during the first maintenance and returned to the car manufacturer to prove that the car has undergone its first maintenance at the 4S store, ensuring the car's quality guarantee.
15
0
Share

Can a car that stalls when unable to engage gear still be put into gear?

This is an issue with the gear lever. Below is relevant information about the gear lever: Basic concept: Function: By manipulating the gear lever to change the engagement and disengagement of transmission gears at different ratios, the car can accelerate, decelerate, or reverse. For manual transmission cars, the gear positions vary depending on the model. Correct grip: The way to hold and operate the gear lever: The palm of the right hand lightly touches the gear knob, with the five fingers naturally gripping it downward. The palm can rotate appropriately according to the needs of different gears. Operation method: For manual transmission cars with left-hand drive steering wheels, the gear lever is installed on the right side of the driver's seat or on the steering column. The grip method involves the palm of the right hand touching the gear knob, with the five fingers naturally holding it. When operating the gear lever, keep your eyes on the road ahead, and use the wrist's strength to accurately push and pull the gear lever into position. Avoid gripping the gear knob too tightly to accommodate the different force directions required for various gears.
11
5
Share

Where can I quickly learn a Class B license?

To quickly obtain a Class B license, you need to register and study at a local driving school, followed by taking the driver's license test. Class B1 permitted vehicle types: Medium-sized passenger vehicles, including medium-sized passenger cars (such as city buses with a capacity of 10 to 19 people). Other permitted vehicle types include C1, C2, C3, C4, and M. Class B2 permitted vehicle types: Large trucks, including heavy and medium-duty trucks; heavy and medium-duty specialized operation vehicles. Other permitted vehicle types include C1, C2, C3, C4, and M. Downgrading from Class B to Class C: A Class B license can be downgraded to a Class C license. This is a license downgrade service and does not require an exam. Simply visit the vehicle management office to process it. Required materials include the original ID card, two copies of the ID (front and back), two one-inch color photos (must be taken within the last two months), and the original driver's license.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.