···
Log in / Register

What are the causes of the panoramic sunroof noise in the Roewe RX5?

4 Answers
McReed
07/29/25 8:21pm
Roewe RX5 panoramic sunroof noise causes: 1. The sunroof sealing rubber strip ages due to long-term exposure to rain or sunlight, leading to noise. Using rubber conditioner can temporarily restore the rubber strip's performance; 2. Loose sunroof screws causing ceiling noise; 3. Dust particles in the sunroof track. When dust accumulates to a certain extent, friction occurs during sunroof operation, resulting in noise. Car sunroof maintenance recommendations: 1. During car washing, avoid using a high-pressure water gun to directly spray the sealing ring; 2. On extremely bumpy roads, do not fully open the sunroof, as excessive vibration between the sunroof and the track may cause deformation of related components or even damage the motor. Also, strictly prohibit opening the sunroof during rain or car washing; 3. The biggest concern when using a sunroof is water leakage. Proper use and maintenance of the sunroof can effectively prevent leaks.
Was this review help?
6
2
Share
OSkylar
08/14/25 4:59pm
Recently, my Roewe RX5's panoramic sunroof keeps making squeaking noises, especially noticeable when driving on highways or going up/down slopes. I suspect it might be due to accumulated dust in the tracks or dried-up lubricant causing friction. The noise gets worse in hot weather when metal materials expand and squeeze together. If left unattended, the sound will likely worsen and may wear out the tracks, potentially causing the sunroof to jam and fail to close. My friend's car had the same issue, and he recommended doing simple track maintenance every quarter - cleaning out debris with a toothbrush and spraying specialized lubricant. Remember not to use engine oil as it tends to attract more dust. Additionally, avoid frequent opening/closing of the sunroof in daily use to reduce unnecessary wear. Trying DIY maintenance can save you repair costs.
Was this review help?
13
4
Share
Expand All
CamilaRose
10/16/25 4:01am
Having worked in auto repair for several years, I've dealt with numerous cases of sunroof rattling issues in the Roewe RX5. The main cause is lack of lubrication on the track rails and dust accumulation, which creates friction noises during operation. Secondary reasons include loose mounting screws or hardened rubber seals that produce squeaking sounds when rubbing. Hot weather exacerbates material expansion problems. A simple solution is to clean the tracks and apply specialized grease—avoid using regular engine oil. All you need are a toothbrush and spray lubricant, and the job can be done in ten minutes. Ignoring the noise accelerates component wear, eventually leading to a non-functional sunroof. I recommend checking it during every maintenance service to prevent major repairs.
Was this review help?
19
2
Share
Expand All
TaliaAnn
11/29/25 4:48am
My Roewe RX5 has been used for two years, and the panoramic sunroof always makes loud noises in summer. It should be caused by thermal expansion and contraction; the tracks and frame materials expand under high temperatures and squeeze against each other, causing friction. Sometimes the noise reduces after rainy days, as moisture lubricates the metal. Avoid opening the sunroof during high-temperature periods in daily use to prevent accelerated aging. Every time I wash the car, I ask the workers to clean the dust in the gaps, which can alleviate the abnormal noise. If it happens frequently, it's best to visit a professional shop to check whether the sealing strips have hardened or the tracks are worn, so as not to affect driving comfort. Paying attention to these small details can save a lot of trouble.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Where is the fuel pump fuse located in the Magotan?

New Magotan's fuel pump fuse is located at the lower left position of the instrument panel. Observe carefully at the lower left of the instrument panel to locate it. More information about the new Magotan fuel pump fuse is as follows: 1. Introduction: Locate the fuse position according to different vehicle models. Generally, the fuse box is near the battery. The fuse box is usually secured with clips, and some premium models may have bolts for tightening. Carefully remove the box cover to access the fuses. 2. Corresponding electrical equipment: Fuses correspond to specific electrical devices. In-car electrical devices have their own independent fuses. Typically, power seats, power windows, cigarette lighters, etc., belong to internal electrical systems, while the vehicle computer, headlights, horn, air conditioning compressor, etc., are part of the external electrical system.
18
5
Share

Where is the automotive three-way catalytic converter located?

The three-way catalytic converter is located in the chassis section of the engine, inside the first bulge of the vehicle's exhaust pipe. It serves as a crucial filtration device in the engine's exhaust system, converting harmful substances produced by the engine into harmless substances before they are expelled from the vehicle. The function of the three-way catalytic converter is to transform harmful gases such as CO, HC, and NOx emitted from the vehicle's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction processes. When high-temperature exhaust gases pass through the purification device, the purifying agents in the three-way catalytic converter enhance the activity of CO, HC, and NOx, promoting specific oxidation-reduction chemical reactions. CO oxidizes at high temperatures into colorless, non-toxic carbon dioxide gas; HC compounds oxidize into water (H2O) and carbon dioxide; and NOx is reduced into nitrogen and oxygen. These three harmful gases are converted into harmless gases, thereby purifying the vehicle's exhaust emissions.
18
5
Share

Where is the Cadillac Fuel Pump Control Module Located?

Cadillac fuel pump control module is located behind the right-side panel in the trunk. Below are the detailed descriptions: 1. Function of the high-pressure fuel pump: The high-pressure fuel pump compresses low-pressure fuel from the low-pressure fuel line into high-pressure fuel, which is then delivered to the fuel rail through the high-pressure fuel line. 2. Working principle of the high-pressure fuel pump: The high-pressure fuel pump consists of the pump body, intake valve (high-pressure fuel pump solenoid valve), pump piston, outlet valve (check valve, mechanical device), and the pump chamber formed between the pump body and the intake/outlet valves. The high-pressure fuel pump is mechanically driven by a square cam mounted on the camshaft, converting low-pressure fuel into high-pressure fuel. This conversion process mainly involves three stages: fuel suction, compression, and fuel discharge.
15
4
Share

What are the full range of models under Dongfeng Citroën?

Citroën offers three vehicle series: sedans, SUVs, and MPVs. Among them, the currently available sedans include six models: the Classic C-Quatre, the New Elysee, the C4 C-Quatre, the Citroën C4L, the Citroën C5, and the Citroën C6. The SUV lineup consists of three models: the C4 Aircross, the Citroën C3-XR, and the C5 Aircross. Additionally, there is an MPV model, the imported Citroën C4 Picasso. The Citroën brand was founded in 1919 as a French automobile brand by André Citroën and is currently one of the brands under the French PSA Group (Peugeot Citroën Group). Dongfeng Citroën, established in 1969, is a major joint venture brand in China between Dongfeng Motor Corporation and the French PSA Group, responsible for the production and sales of Citroën brand vehicles in China.
14
1
Share

What color indicates the airbag is in working condition?

When the airbag is functioning normally, there will be no airbag warning light displayed on the dashboard. Below is additional information: 1. Composition of the airbag: The automotive airbag mainly consists of the airbag sensor, collision avoidance airbag, and electronic control device. The driver's side collision avoidance airbag is installed in the steering wheel, while the passenger side collision avoidance airbag is generally mounted on the dashboard. The airbag sensors are installed on the left, right, and middle sections of the cabin partition; the middle airbag sensor and the airbag system are integrated with the electronic control device. 2. Maintenance of the airbag: The quality of automotive airbags may deteriorate after 8-10 years of use, so it is recommended to perform maintenance every 10,000-20,000 kilometers. If the airbag needs to be replaced, it is advisable to choose an authorized service center for replacement.
1
0
Share

What is the fault when white exhaust is emitted from the engine exhaust pipe?

There are two situations when white exhaust is emitted from the engine exhaust pipe: 1. White smoke: When white smoke is emitted from the exhaust pipe, it may be due to dirt on the vehicle's air filter causing insufficient air intake, or a fault in the carburetor, or contamination of the oxygen sensor in the exhaust pipe, which prevents the computer from providing correct information for air distribution. 2. White vapor smoke: Normal white vapor smoke is caused by the exhaust gas from the exhaust pipe. When the temperature of these exhaust gases reaches a certain level, they condense into water droplets; if a large amount of white vapor smoke is emitted from the exhaust pipe while the engine is running, check for water in the fuel tank, whether the cylinder gasket is damaged, whether there are cracks in the cylinder, and whether the cylinder sleeve sealing ring is in good condition.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.