What are the body dimensions of the Warrior?

How to Operate the High and Low Beam Switch?

Detailed introduction about the high and low beam switch of a car is as follows: 1. Specific operation for switching between high and low beams: When the switch is turned to the low beam position, pulling the lever inward will flash the high beam once, while pushing it outward will keep the high beam on continuously. 2. The light of the low beam is directed downward, projecting within 12-18 meters in front of the car with a very distinct cutoff line between light and dark: Within the range of 30-40 meters behind the cutoff line of the low beam, relying on ground-reflected light, brightly colored objects in this area can be distinguished. However, stationary dark-toned objects on the road are not easily noticeable, so extra caution is needed when driving at night. 3. Situations requiring immediate switching from high beam to low beam: When a vehicle is approaching from the opposite direction, when the distance to a vehicle ahead in the same direction is relatively close, when the road is already sufficiently illuminated, or when entering a busy street.

9

5

Share

How to Steer When the Rear of the Car Drifts to the Left?

The steering method when the rear of the car drifts to the left is as follows: 1. When reversing: Turn the steering wheel to the left, and the rear of the car will turn left; turn the steering wheel to the right, and the rear of the car will turn right. 2. When correcting: If the rear of the car drifts to one side, when the body drifts left, you need to move right to correct it, so steer right; otherwise, do the opposite. Precautions for reversing are as follows: 1. Speed: When reversing, master the operation method of slow driving and quick steering. The reversing speed should be controlled within 5km/h. 2. Repeated reversing: During reversing, if limited by terrain or the steering angle of the steering wheel, and repeated forward or backward movements are required, at the moment before each stop when reversing or moving forward, quickly use the movement of the vehicle to turn the steering wheel to prepare for the next forward or backward movement. Do not forcefully turn the steering wheel after the vehicle has stopped.

17

3

Share

What are the tips for passing the Subject 2 driving test?

Here are some tips for Subject 2: 1. Keep the speed slow: This is the fundamental rule for practicing Subject 2. It means keeping the speed as slow as possible without stopping the vehicle, as slower speed allows more time for adjustments. 2. Adjust the rearview mirrors properly: After getting in the car, make sure to adjust the rearview mirrors correctly, which is especially important for reverse parking and parallel parking. Generally, the rearview mirrors should be positioned lower than usual, with the rear door handles close to the top edge of the mirrors to see the ground markings clearly. 3. Master the three-point alignment method: The three points refer to the driver's eyes, reference points on the car, and reference points on the ground. During Subject 2 operations, it's crucial to identify these points accurately and observe them carefully to ensure precise positioning. 4. Pay attention to the four corners of the car: The front corner is prone to touching the outer line during reverse parking, while the rear corner may touch the side lines of the parking space; the front corner may cross the line during curve driving; the front corner may cross the line during right-angle turns; the front corner may touch the outer line or the left front corner of the parking space during parallel parking, and the right rear corner may touch the right parking space line. Therefore, always be mindful of the four corners and the outer lines.

13

1

Share

What Are the Speed Ranges for Manual Transmission Gears?

Manual transmission gear speed ranges are as follows: 1st gear corresponds to 10-20 km/h, 2nd gear corresponds to 20-30 km/h, 3rd gear corresponds to 30-40 km/h, 4th gear corresponds to 40-50 km/h, 5th gear corresponds to 50-60 km/h, and 6th gear corresponds to speeds above 60 km/h. A manual transmission car uses a manual gear-shifting mechanical transmission to regulate speed, meaning the driver must manually shift the gear lever to change the gear engagement position inside the transmission and alter the gear ratio. Driving techniques for manual transmission cars: Press the clutch pedal, shift the gear lever into 1st gear, observe the surroundings to ensure safety, then release the parking brake lever and lift the clutch pedal. Quickly lift the clutch pedal until the engine sound lowers, then slow the lifting speed. When the car body slightly vibrates, pause the clutch pedal while gently applying some throttle. Then slowly lift the clutch pedal further while gradually increasing the throttle to achieve a smooth start. Precautions for starting a manual transmission car: Do not release the clutch too quickly; lift it gradually. Connect the engine and driveshaft before applying throttle. Gently press the throttle during the semi-engagement phase, then release the clutch. Always release the handbrake before starting.

11

4

Share

Where is the OBD interface of the Peugeot 308?

The OBD interface of the Peugeot 308 is located inside the decorative box below the left side of the steering wheel or in the small compartment under the ashtray in front of the front gear lever. Taking the 2019 Peugeot 308 as an example, it is a compact car with body dimensions of: length 4590mm, width 1820mm, height 1488mm, and a wheelbase of 2675mm. The 2019 Peugeot 308 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 190Nm, and a maximum power of 85kW, paired with a 6-speed automatic transmission.

10

3

Share

How many gears does the New Baojun RC-6 manual transmission have?

The New Baojun RC-6 manual transmission has 6 gears. The manual transmission requires manually shifting the gear lever to change the gear engagement position inside the transmission, altering the gear ratio to achieve the purpose of shifting. Taking the 2019 New Baojun RC-6 as an example, it is a mid-size car with body dimensions of: length 4925mm, width 1880mm, height 1580mm, and a wheelbase of 2800mm. The 2019 New Baojun RC-6 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 147PS, maximum torque of 250Nm, and maximum power of 108kW, paired with a 6-speed manual transmission.

18

4

Share

What are the body dimensions of the Warrior?

How to Operate the High and Low Beam Switch?

How to Steer When the Rear of the Car Drifts to the Left?

What are the tips for passing the Subject 2 driving test?

What Are the Speed Ranges for Manual Transmission Gears?

Where is the OBD interface of the Peugeot 308?

How many gears does the New Baojun RC-6 manual transmission have?

What is the fuel consumption per 100 kilometers for the Trumpchi GS8?

What is the fuel consumption of the GTR?

What to Do If Beginners Can't Tell Whether the Steering Wheel Is Straight?

Does driving a CR-V at 40 mph with body shaking have any impact if not repaired?