···
Log in / Register

What are the body dimensions of the Trailblazer?

4 Answers
WyattRose
07/29/25 11:00am

The body dimensions of the Trailblazer: The length, width, and height are 4999/1953/1727mm respectively, with a wheelbase of 2963mm. Standard sedan dimensions: Standard sedans generally have a length between 3.5 meters and 6 meters, a width between 1.6 meters and 1.8 meters, and a height between 1.4 meters and 1.6 meters. Sedan classifications: There are many classifications for sedans, which are typically divided based on wheelbase. Sedan models: There are various types of sedan models. For example, the Xiali is a compact hatchback with a length between 3.6 meters and 4 meters; the Jetta is a mid-size sedan with a length between 4.4 meters and 4.7 meters. The Mercedes-Benz is a full-size sedan with a length between 5 meters and 5.2 meters. The wheelbase has the greatest impact on interior space, not the length of the car.

Was this review help?
14
2
Share
SanIsabela
08/13/25 5:00pm

I've been driving the Trailblazer for a while now, and its body dimensions are truly impressive—it's nearly 5 meters in length, close to 2 meters in width, and stands about 1.7 meters tall, with a wheelbase exceeding 2.8 meters. As a daily driver for family outings and transporting kids, these dimensions prove incredibly practical. Both the second and third rows offer ample space, allowing my children and even our little dog to move around comfortably without feeling cramped. The trunk easily accommodates two large suitcases plus a pile of shopping bags. I remember during our last outing in the rain, with five people onboard, the cabin never felt oppressive, and legroom was more than generous. I even occasionally set up a folding chair inside as a temporary rest area. Sure, parking requires a bit more attention, but overall, this spacious design significantly enhances daily convenience, especially when hauling bulky items—it never lets you down.

Was this review help?
16
4
Share
Expand All
VioletMarie
10/07/25 8:26am

I'm quite interested in car design. The Trailblazer's body dimensions are about 5 meters long, nearly 2 meters wide, and approximately 1.7 meters tall. These proportions give it a very elegant appearance, unlike some SUVs that look bulky. I remember being immediately drawn to its sleek silhouette during the test drive. The over 2.8-meter wheelbase makes the lines much smoother, and the roof height is just right—not too tall or abrupt. Combined with its wide track, you can really see its dynamic side profile when parked. In contrast, some other cars I've driven before had rather ordinary designs. The Trailblazer's dimensions give it a commanding presence, and details like the front and rear light clusters perfectly complement its large body, creating an overall impression that's both stable and modern. I believe when the dimensions are well-proportioned, beauty naturally follows—and it certainly doesn't disappoint.

Was this review help?
1
4
Share
Expand All
VanHadley
11/21/25 3:01am

I often drive for commuting, and the Trailblazer's dimensions are standard for a mid-to-large SUV, measuring about 5 meters in length, nearly 2 meters in width, and over 1.7 meters in height. It feels quite stable when driving. The body doesn't sway too much when turning, and the wheelbase of over 2.8 meters provides sufficient support. However, you need to pay attention to the width when parking, as narrow parking spaces can easily trap the wheels. I've taken it on a long-distance trip once, and it performed well on the highway with good stability—the size also helps keep cabin noise under control. Overall, the dimensions are suitable for daily use.

Was this review help?
13
1
Share
Expand All
More Forum Discussions

Can Modified Wheel Size Pass the Annual Inspection?

Modifying wheels is a relatively conspicuous modification. If the wheel modification is not registered with the vehicle management office, it will not pass the annual inspection. Introduction to Wheels: Wheels are the rotating part of the tire's inner rim connected to the hub through spokes, which is the metal component mounted on the axle that supports the tire. Also known as rims, steel wheels, or simply wheels. Wheels come in various types based on diameter, width, forming method, and material. Types of Wheels: Depending on the characteristics and needs of different vehicle models, the surface treatment process of wheels also varies, mainly divided into painting and plating. For ordinary vehicle models, the appearance of wheels is less considered, with good heat dissipation being a basic requirement. The process mostly involves painting, which includes spraying followed by baking, making it cost-effective with vibrant colors that last long, even when the vehicle is scrapped. Many mass-market vehicle models use painted wheels. Some fashionable and dynamic colored wheels also employ painting technology.
18
0
Share

Is the Venucia D60 compliant with China VI emission standards?

Some models of the Venucia D60 comply with China VI emission standards, while others meet China V standards. The China VI-compliant models are sold in regions where the China VI standards have been implemented, and the China V-compliant models are available in areas where the China VI standards have not yet been enforced. Below is some relevant information about the Venucia D60: 1. The Venucia D60 is a compact sedan, equipped with a 1.6-liter naturally aspirated engine across all variants. The engine, coded HR16, delivers a maximum power of 93 kW, a maximum torque of 154 Nm, with peak power achieved at 5,600 rpm and peak torque at 4,000 rpm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. The Venucia D60 employs a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. The vehicle is equipped with an electric power steering system, which provides a lighter steering feel.
6
1
Share

Where is the air conditioning filter element of the Haifuxing located?

The air conditioning filter element of the Haifuxing is located under the glove box on the passenger side. Here are some relevant details: 1. If the filter element is dirty, you can clean it by blowing compressed air from the reverse side. Operation method: Hold the air gun 5 cm away from the filter element and blow at a pressure of 500 kPa for about 2 minutes. The air filter element is very prone to dust accumulation. Use compressed air to remove the dust, but never wash it with water, as this can easily cause damage. 2. The Haifuxing is a compact car launched by FAW Haima, with body dimensions of 4464mm in length, 1695mm in width, and 1425mm in height, and a wheelbase of 2610mm. The Haifuxing is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 111ps and a maximum torque of 147nm, paired with a 5-speed manual transmission.
12
4
Share

What are the reasons for a car not starting with no power at all inside?

There are several reasons why a car may not start with no power at all inside: 1. Dead battery: This could be due to a drained battery from leaving headlights on for a long time or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures. 2. Incorrect gear position: For automatic transmission cars, the gear must be in P or N position when starting. If it is in R or D position, the car will not start. Some manual transmission cars may also not start if the clutch is not depressed. 3. Lack of antifreeze: Using water or low-quality antifreeze in the car can cause the engine to freeze and crack in extremely cold winter conditions, leading to the water pump failing to operate, the car not starting, and damage to other engine components.
4
4
Share

How to Decelerate an Automatic Transmission Car?

To decelerate an automatic transmission car, release the accelerator pedal early and apply the brake. Below are detailed introductions to the gear positions of an automatic transmission vehicle: 1. The R gear is the reverse gear. When this gear is engaged, it connects the hydraulic system's reverse gear oil circuit, causing the drive wheels to rotate in reverse for backward movement. Never forcibly shift to the "R" gear when the vehicle hasn't come to a complete stop, as this may damage the transmission. 2. The N gear is the neutral gear. When neutral is engaged, the planetary gear system idles without power output. 3. The D gear is the drive gear. When the gearshift lever is in this position, the hydraulic control device automatically connects the corresponding forward gear oil circuit based on throttle opening signals and vehicle speed signals. It can automatically shift up or down according to driving speed changes, achieving automatic transmission functionality. 4. The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the vehicle's tires, preventing the car from moving.
11
2
Share

What are the functions of the multi-function steering wheel buttons in Volkswagen?

The functions of the multi-function steering wheel buttons in Volkswagen are: 1. Resume button: Press RES to restore the previously set speed after temporarily canceling cruise control; 2. Set button: Press SET to set the current speed as the cruise speed after temporarily canceling cruise control; 3. Deceleration button: If adaptive cruise control is activated, use it to reduce speed; 4. Acceleration button: If adaptive cruise control is activated, use it to increase speed; 5. Cruise control on/off button: Press to turn on the cruise control function; 6. Cancel button: Press to cancel the cruise control function; 7. Volume adjustment buttons: Press to increase or decrease volume, with the left button decreasing volume and the right button increasing volume; 8. Bluetooth phone button: Press to answer incoming calls; 9. Voice control button: Press to activate voice commands; 10. Option toggle button: Used to switch between up and down options on the multi-function display; 11. Menu toggle button: Used to switch between left and right options on the multi-function display, press OK to confirm; 12. Track change button: Press to skip to the next or previous track.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.