···
Log in / Register

What are the body dimensions of the Toyota RAV4?

3 Answers
SanAriana
07/29/25 7:02pm
Toyota RAV4's body dimensions are 4630mm in length, 1855mm in width, and 1685mm in height, with a wheelbase of 2660mm. In terms of suspension, the front suspension of this vehicle is a MacPherson strut independent suspension, and the rear suspension is an E-type multi-link independent suspension. Power-wise, this car is equipped with two engines: one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine. Exterior-wise, the design of the Toyota RAV4 follows the family-style design, with the front grille adopting a trapezoidal shape, decorated with short horizontal chrome strips inside, creating a strong sense of sportiness. The design of the headlights on both sides is very sharp, with high recognizability and strong aggressiveness.
Was this review help?
13
3
Share
ArcherAnn
08/14/25 1:04pm
I drive a Toyota RAV4 for daily commuting, and its body size is quite suitable: approximately 4.6 meters in length, about 1.86 meters in width, around 1.69 meters in height, and a wheelbase of 2.7 meters. This size makes parking in the city very convenient, easily fitting into many narrow parking spaces, and its small turning radius ensures agile handling. The thoughtful space design provides comfortable seating for both front and rear passengers with ample width and height, avoiding any sense of confinement. The trunk can accommodate large shopping bags or suitcases. The height enhances driving visibility, reducing blind spots, which is friendly for new drivers. Overall, the RAV4's dimensions strike a balance between practicality and convenience, making it ideal for daily city commuting and family use, while its lightweight design helps reduce fuel consumption.
Was this review help?
1
2
Share
Expand All
EmersynFitz
10/15/25 2:53am
As a family user, I'm particularly interested in the dimensional details of the Toyota RAV4: the vehicle length is approximately 4600 mm, width around 1855 mm, height about 1685 mm, with a wheelbase nearing 2690 mm. These dimensions ensure spacious rear seating where two or three children can stretch their legs comfortably, along with a generous trunk capacity that easily accommodates luggage or strollers. The height setting simplifies entry and exit, making it effortless for elderly passengers and children, while the width enhances stability, preventing body roll during turns. The lower height facilitates parking without roof clearance issues in underground garages, and the moderate length means it won't occupy excessive parking space. This well-balanced size makes the RAV4 ideal for weekend getaways or long-distance travel, perfectly balancing safety and comfort.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

Where is the rear air conditioning control for the Audi Q5 located?

The rear air conditioning control area for the Audi Q5 is located at the rear end of the center armrest. Below is a detailed introduction to the Audi Q5: 1. Exterior: The FAW Audi Q5 features a distinctive large grille front face, with an overall stylish and attractive design. The body lines are smooth and flowing. The exterior is fashionable and beautiful, with sleek lines, while the interior boasts fine craftsmanship and is equipped with rich and practical features. The space is spacious and practical, and the power and handling performance are quite good. 2. Powertrain: It is equipped with a 2.0TFSI four-cylinder inline engine, paired with a 7-speed Stronic dual-clutch transmission, providing ample power output, smooth gear shifting, and quick acceleration.
11
3
Share

How to Adjust the Up and Down Position of the Audi Central Rearview Mirror?

Audi central rearview mirror adjustment switch is located on the left door handle of the driver's seat. Below is a detailed introduction to the adjustment method for the Audi central rearview mirror: 1. Left rearview mirror: Adjust the horizon to the center 1/2 of the left rearview mirror, while ensuring that 1/4 of the car body is visible in the mirror. Keep the rearview mirror parallel to the horizon and position the horizon at the center 1/2 of the mirror surface, with the mirror slightly facing the driver to ensure a clear view of vehicles directly behind. Before adjusting the rearview mirror, it is best to adjust your seating position. 2. Right rearview mirror: Adjust the horizon to 2/3 of the right rearview mirror, with the car body image also showing 1/4.
11
5
Share

Should the Yamaha Jog use 92 or 95 octane?

The Yamaha Jog i engine has a relatively high compression ratio, making it more suitable for 95 octane gasoline. However, if the manual recommends using 92 octane or higher, and there are no adverse reactions (such as noise, vibration, etc.) when using 92 octane, it can be used long-term. The differences between 95 octane and 92 octane gasoline are as follows: 1. Different compression ratios for usage: Generally, vehicles with a compression ratio between 8.5–9.5 should use 92 octane gasoline; vehicles with a compression ratio above 9.5 should use 95 octane. 2. Different octane ratings: 92 octane gasoline has a lower octane rating than 95 octane gasoline. That is, 92 octane contains 92% isooctane, while 95 octane contains 95%. 3. Price difference: 92 octane gasoline is cheaper per unit than 95 octane.
1
0
Share

What to Do If You Forgot Your Driver's License?

If you forget to bring your driver's license, you can present your ID card or provide the traffic police with your ID number. The police will check the system to verify whether you have a license. It is recommended that drivers try not to forget their licenses when going out. Depending on the situation, the following actions will be taken: 1. Situation 1: If the driver provides a license and there are no other violations during the drive, they will receive a warning or a fine ranging from 20 to 200 yuan, and the vehicle will be promptly returned. 2. Situation 2: If the driver provides a license but commits other violations during the drive, they will be penalized based on the violations and for not carrying the license, and the vehicle will be promptly returned. 3. Situation 3: If the driver fails to provide a license, they will be penalized as if driving without a license.
17
1
Share

How to Solve Insufficient Electronic Parking Force?

Check if there are any issues and perform repairs if necessary. Below is relevant information about the parking brake system: 1. System: The Electronic Parking Brake (EPB: Electrical-Park-Brake) integrates temporary braking during driving with long-term braking after parking, and achieves parking braking through electronic control. The electronic parking brake uses electronic control to achieve parking braking. Its working principle is the same as that of a mechanical handbrake, both relying on the friction generated between the brake disc and brake pads to control parking braking. However, the control method has changed from the traditional mechanical handbrake lever to an electronic button. 2. Advantage: Traditional handbrakes require the driver to manually release the handbrake or skillfully coordinate the throttle and clutch for a smooth start on slopes. In contrast, the AUTOHOLD automatic parking function provides precise parking force through a slope sensor controlled by the system. During startup, the parking control unit calculates information from sensors such as clutch distance, clutch engagement speed, and throttle pedal position.
7
5
Share

Why does an electronically injected diesel vehicle lack power when climbing hills and fail to accelerate?

Damage to the vehicle's fuel metering function can result in failure to accelerate, usually caused by severe wear of the internal plunger in the vehicle's fuel metering unit. Below is more information about the fuel pump: 1. Introduction: Among the four wires of the automotive fuel pump, two are for the fuel level sensor (commonly known as the float), one is for power supply, and one connects to the fuel gauge. The other two wires are for the fuel pump: one for power supply and one for grounding. The fuel pump operates with high current, hence the wires are thicker, while the sensor wires are thinner, making them easy to distinguish. 2. Fuel Pump Relay: The abbreviation in English is PMR, and the full term is Pump-Motor-Relay. The fuel pump relay controls the power supply to the fuel pump. Modern vehicles typically use direct injection or port injection, and once the fuel supply meets certain requirements, the relay disconnects the fuel pump, thereby controlling its operation. 3. Basic Function of Automotive Relays: It acts as an "automatic switch" that uses a small current to control the operation of a larger current. In circuits, it serves functions such as automatic regulation, safety protection, circuit conversion, and switching.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.