What are the body dimensions of the Soueast DX5?

Where can the engine number be found?

The engine number is generally located on the outer surface of the engine cylinder block, on the vehicle's nameplate, or on the nameplate inside the engine compartment. The simplest and most direct method is to check the vehicle's administrative green book or the vehicle registration certificate. The engine number is like a person's ID number, representing each vehicle. It contains very important information about the vehicle. The chassis number is stamped on the vehicle's frame. The specific location varies by manufacturer, so you can refer to your vehicle's manual. The engine model is an identification code assigned by the engine manufacturer according to relevant regulations, industry practices, or the engine's attributes, representing the manufacturer, specifications, performance, features, production process, purpose, and batch of the engine. This includes information such as fuel type, number of cylinders, displacement, and static braking power. Engines installed in cars or multi-purpose passenger vehicles are required to display the professional manufacturer's name, model, and production number. The chassis number, commonly referred to as the Vehicle Identification Number (VIN), is a set of characters assigned by the manufacturer to identify a vehicle. The VIN consists of 17 alphanumeric characters, also known as the 17-digit identification code, chassis number, or 17-digit number. The combination of these characters ensures that no two vehicles of the same model will have the same number within 30 years, making it unique to each vehicle—hence its nickname, "the car's ID card." It is typically found in the following locations: on the vehicle registration certificate and on the lower left side of the front windshield. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, is the production number assigned to each individual engine, and no two engines will have the same number. The engine number is composed of several parts: Front section: Includes the product series code, generation symbol, and regional or company code, chosen by the manufacturer as needed but must be approved and recorded by the relevant industry standards organization. Middle section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear section: Includes symbols for structural features and intended use. Tail section: Distinguishing symbol. If differentiation is needed due to improvements or other reasons within the same product series, the manufacturer selects an appropriate symbol. The rear and tail sections may be separated by a hyphen. The chassis number consists of 17 characters divided into three parts. Part 1: WMI—World Manufacturer Identifier (positions 1–3); Part 2: VDS—Vehicle Descriptor Section (positions 4–9); Part 3: VIS—Vehicle Identifier Section (positions 10–17).

6

0

Share

Will Running a Red Light When Turning Left Be 100% Captured?

Whether a motor vehicle runs a red light when turning left or going straight, it is considered a traffic violation and will be captured if there are surveillance cameras. According to the relevant provisions of the Road Traffic Safety Law, vehicles must obey traffic signals, including traffic lights, traffic signs, road markings, and the directions of traffic police. If both the left-turn signal and the straight signal are green, going straight from a left-turn lane violates the designated lane rules. When the left-turn signal is red, running the red light will result in penalties. Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations" stipulates that driving a motor vehicle in violation of traffic signal lights will result in a deduction of 6 points per offense. To avoid running a red light, consider the following points: Check the arrow signal first, then the circular signal: Currently, there are two types of traffic signals: arrow traffic lights and circular traffic lights. When arrow signals are present, check the arrow signal first and then the circular signal to avoid running a red light. Note: When encountering a circular red light, right turns are permitted; however, if the right-turn arrow signal is red, right turns are prohibited, and violations will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture the violation, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the signal turns red, do not proceed through the intersection; wait for the green light. Check the remaining green light time before proceeding: When the green light is flashing, if there is a countdown timer, use it to judge whether to proceed. If there is no timer and the vehicle is close to the intersection with high speed, it may proceed to avoid running a red light due to untimely braking. If the speed is low and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states the following for motor vehicle and non-motor vehicle signal lights: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians must follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered a violation under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If a violation is captured by surveillance cameras while yielding, manual review will not record it as running a red light. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights, the evidence of violation may be blurry, and no penalty will be imposed for mistakenly running a red light. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may be unavoidable. After delivering the patient, provide proof from the hospital or the rescued individual to the traffic police for verification. If confirmed, the violation records can be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at major intersections. Drivers must follow the gestures of the traffic police.

14

0

Share

What is the speed requirement for gear shifting in Subject 3?

The timing for shifting from 1st to 2nd gear is 15-20 km/h; from 2nd to 3rd gear is 25-30 km/h; from 3rd to 4th gear is 35-40 km/h; and from 4th to 5th gear is 45-50 km/h. Downshifting must also be done in sequence, and skipping gears is not allowed. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driving license examination. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver examination. The content of the road driving skills test varies for different types of vehicles. Road test items: preparation before getting on the car, starting, straight driving, changing lanes, passing intersections, parking by the roadside, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, turning around, and night driving. Provincial public security traffic management departments may add test items for specific vehicle types based on local conditions and determine other test items for different vehicle types. The safety and civilized driving knowledge test includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Key points for gear shifting in Subject 3: Start in 1st gear: Using 2nd gear or higher can cause the car to lurch forward suddenly, which is extremely dangerous. Shift gears sequentially: Skipping gears is strictly prohibited during the Subject 3 road test. Only sequential shifting from 1-2-3-4-5 is allowed. Keep your eyes on the road while shifting gears: Looking down at the gear lever during Subject 3 will result in disqualification. The correct operation is to steer with the left hand, shift gears with the right hand, and keep your eyes on the road. Looking down while shifting gears can easily lead to rear-end collisions or veering off course. Remove your right hand from the gear lever after shifting: Keeping your right hand on the gear lever and unconsciously moving it may be misinterpreted by the system as incorrect shifting behavior. Gear shifting penalty rules: Starting or driving in the wrong gear without timely correction: 10 points deducted. Using a gear that does not match the speed for a long time, causing the engine speed to be too high or too low: 100 points deducted. Looking down at the gear lever or failing to shift gears twice in a row while driving: 100 points deducted. Gear grinding during shifting: 10 points deducted. Failing to smoothly shift gears as instructed: 100 points deducted. Vehicle speed not matching the gear: 10 points deducted. Exam precautions: Do not shift gears continuously, e.g., shifting from 2nd to 3rd gear requires driving a certain distance before shifting to 4th gear. Do not change lanes continuously (i.e., do not change two lanes at once), e.g., changing from lane 1 to lane 2 requires driving a certain distance before changing to lane 3. Do not coast in neutral, i.e., avoid being in a semi-clutch state while driving. Gears must match the speed. Avoid excessive turning angles when changing lanes to prevent the front or rear of the car from crossing the line (the system will judge this as crossing the line). Shifting gears must be done with one clutch per gear, i.e., fully depress the clutch before shifting to the next gear. Do not stay in neutral for more than 5 seconds while driving. Generally, the handbrake is not required when parking, and turn signals are not needed for starting except during specific test items. Through repeated practice and testing, the best way to shift gears is to fully release the clutch, wait a few seconds, and then depress the clutch again to shift to the next gear.

19

2

Share

Does the Audi A7 have four-wheel drive?

Audi A7 does have four-wheel drive, which refers to the vehicle maintaining a four-wheel drive form throughout the entire driving process, with the engine output torque distributed to the front and rear wheels in a fixed ratio. This drive mode ensures excellent off-road and handling performance at all times, but it cannot adjust torque distribution based on road conditions and has relatively higher fuel consumption. The Audi A7 is a four-door sports luxury coupe positioned between C-class executive sedans and D-class luxury sedans, with body dimensions of 4969mm in length, 1911mm in width, 1420mm in height, and a wheelbase of 2914mm.

17

4

Share

What does AM mean in a car?

AM in a car refers to the radio frequency band. Here is a brief introduction about AM in cars: 1. Composition: Car radios have two modes, one is FM and the other is AM, with FM being the more commonly used one. AM stands for amplitude modulation, while FM stands for frequency modulation. 2. Function: FM is generally preferred in cars due to its better sound quality, while the AM plug is used for connecting MP3 players. The AM band refers to medium-wave broadcasting, whereas FM is short-wave. The car radio, installed as an audio entertainment feature in vehicles, is one of the earliest and most common configurations in car audio-visual entertainment systems.

16

3

Share

Will Removing Car Wrap Damage the Paint?

Removing car wrap can sometimes peel off the car paint. It depends on the situation. Definition of Car Wrap: Car wrap is a high-performance, eco-friendly film widely used in the automotive detailing industry. It is commonly known as a transparent paint protection film and has excellent toughness. Function of Car Wrap: Car wrap is a thermoplastic polyurethane film (TPU) that contains UV-resistant polymers, preventing yellowing. It offers superior toughness, wear resistance, and easy application, protecting against scratches and impacts. Once applied, it isolates the car paint from the air, guarding against acid rain, oxidation, and scratches, providing long-lasting protection for the car's paint.

20

5

Share

What are the body dimensions of the Soueast DX5?

Where can the engine number be found?

Will Running a Red Light When Turning Left Be 100% Captured?

What is the speed requirement for gear shifting in Subject 3?

Does the Audi A7 have four-wheel drive?

What does AM mean in a car?

Will Removing Car Wrap Damage the Paint?

Will points be deducted for incorrect steering wheel posture in Subject 3?

What are the reasons for the decrease in engine power of the BMW X6?

Will incorrect steering wheel handling technique result in point deduction in Subject 3?

What is the purpose of green lasers on highways?