What are the body dimensions of the Mercedes-Benz GLB?

2 Answers
StGia
07/24/25 7:47am
The length, width, and height of the Mercedes-Benz GLB are 4638mm, 1834mm, and 1687mm respectively, with a wheelbase of 2829mm. More details about the Mercedes-Benz GLB are as follows: 1. The Mercedes-Benz GLB is equipped with a 1.3-liter turbocharged four-cylinder engine across the entire lineup. It delivers 163 horsepower and a maximum torque of 250 Nm, with maximum power output at 5500 rpm and maximum torque output between 1620 and 4000 rpm. The engine features an aluminum cylinder head and block, and is equipped with direct fuel injection technology. 2. The Mercedes-Benz GLB's engine is paired with a 7-speed dual-clutch transmission. The dual-clutch transmission offers high transmission efficiency and fast gear shifts, making it suitable for use with small-displacement turbocharged engines. 3. The Mercedes-Benz GLB uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear, enhancing both the vehicle's handling and ride comfort.
Was this review help?
8
0
Share
LaRyder
08/11/25 3:25am
As someone who enjoys driving SUVs, I've had multiple experiences with the Mercedes-Benz GLB, and its body dimensions are quite practical. It measures 4638 mm in length, 1834 mm in width, 1662 mm in height, and has a wheelbase of 2829 mm. In my opinion, these dimensions are not too large for city driving, making parking relatively easy, while the long wheelbase ensures a spacious interior that can comfortably seat seven people. I often take my family on trips, and although the third-row seats are compact, they are sufficient and much more comfortable than smaller cars. In terms of design, the height is not excessive, which reduces wind resistance at high speeds, making it quite fuel-efficient. If you're considering a new car, I also recommend comparing the dimensions with similar models like the GLC—the space utilization is indeed impressive. Overall, the GLB strikes a good balance between practicality and driving experience, making it a great choice.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

What brand is the original Audi dash cam?

If the dash cam is not factory-installed, the brand may vary depending on the procurement by the 4S store, and it could differ across different periods. It is best to check the dash cam's label for confirmation. Below is an introduction to car dash cams: 1. Dash Cam: A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. After installation, it can record the entire driving process, including video and audio, which can serve as evidence in traffic accidents. For those who enjoy road trips, it can also document the journey through challenging terrains. While driving, it continuously records videos, capturing time, speed, and location data. 2. Installation Methods: Dash cams are mainly divided into two categories: portable dash cams and integrated aftermarket DVD dash cams. Portable dash cams can be further classified into rearview mirror dash cams and data dash cams. These types of dash cams are characterized by good concealment, easy installation, detachability, low cost, and simple operation. On the other hand, integrated aftermarket DVD dash cams are usually vehicle-specific and can be divided into front-installed and rear-installed types. Installing these dash cams is more costly and challenging, but they maintain the aesthetic appeal of the car's interior. Additionally, some luxury models come with pre-installed dash cams from the factory.
3
3
Share

What is the RAUM car?

RAUM is a sedan under the Toyota brand. Here are the specific details about the RAUM car: 1. Environmental aspects: In addition to striving to reduce fuel consumption and emissions in accordance with the latest environmental and recycling standards, all models achieve ultra-low emission levels. Toyota eco-plastics are also used, making it easier to dismantle end-of-life vehicles. 2. Performance: Equipped with a high-performance, low-fuel-consumption 1.5L engine, and paired with a SuperECT transmission, the vehicle runs more smoothly and comfortably. The diverse model variations also allow the car to adapt to a wider range of uses.
14
2
Share

Why are there still 2021 models of the R8 if it's discontinued?

R8 discontinued without 2021 models. Here are the specific details of the Audi R8: 1. Model positioning: The Audi R8 is a mid-engine two-seater sports car with a width of 1900mm, and lengths and heights of 4430mm and 1250mm respectively. 2. In terms of power: It is equipped with a 5.2-liter V10 engine, which, after recalibration, has its maximum power increased from 525 horsepower to 550 horsepower, and peak torque increased from 530N·m to 540N·m. Regarding the transmission system, it is fitted with a 7-speed S-tronic dual-clutch transmission.
7
2
Share

Which is easier, Subject 4 or Subject 1?

Subject 1 and Subject 4 differ in terms of exam content, number of questions, emphasis, and answering procedures, with Subject 4 being slightly more difficult than Subject 1. There is no fundamental difference between Subject 1 and Subject 4. The only distinction lies in their focus: Subject 1 emphasizes knowledge related to driving skills, while Subject 4 focuses on safe driving practices. Additional information: The number of questions varies, with Subject 1 exams having significantly more questions than Subject 4 exams, which results in students spending relatively more time on preparation. In contrast, Subject 4 has fewer questions, requiring less time. However, Subject 4 includes more question types, such as multiple-choice and multiple-answer questions, making memorization more challenging.
18
1
Share

What are the differences between diesel and gasoline pickup trucks?

Here are the specific differences between diesel and gasoline pickup trucks: 1. Fuel supply and ignition method: In diesel engines, fuel mixing and combustion occur inside the cylinder. The fuel injector directly sprays high-pressure diesel into the combustion chamber, where it mixes with air to form atomized gas that ignites upon compression. Therefore, gasoline engines have an additional complete ignition system compared to diesel engines. In gasoline engines, gasoline from the fuel pump mixes with air from the air filter in the carburetor to form a combustible mixture, which enters the cylinder combustion chamber through the intake manifold and is ignited by an electric spark. 2. Fuel: Diesel engines use diesel fuel, where the cetane number is an indicator of the fuel's auto-ignition performance (combustibility). The distillation range represents the volatility of diesel, and viscosity is a measure of fuel fluidity. Gasoline engines use gasoline, where knocking is an abnormal auto-ignition phenomenon that may occur during combustion as the compression ratio and gas temperature in the cylinder increase. A higher octane number indicates stronger anti-knock capability, allowing for higher compression ratios. Anti-knock additives, commonly lead compounds, are often added, which is why gasoline often contains lead. 3. Corrosion resistance: Diesel engine main bearings use high-performance materials like lead bronze or lead alloys, which have relatively poor corrosion resistance. Gasoline engine main bearings and connecting rod bearings can use softer materials with better corrosion resistance, such as babbitt metal.
16
0
Share

Which side of the car film should be heated when shrinking?

There are two methods for film shrinking: dry shrinking and wet shrinking, which mainly depend on the technician's operating habits. However, regardless of the method used, uniform shrinkage must be achieved. This means that during the shrinking process, directional considerations should be taken into account first, with the midline as the reference point, and both sides should be heated symmetrically and evenly to achieve film shrinkage. Additional notes: Pay attention to the temperature, the distance from the film, and the local heating time during the shrinking process. For dry shrinking, it is best to use a wet cloth to draw a horizontal wet line in the middle of the windshield, then attach the film. After pre-cutting the edges, use the wet cloth to draw two vertical lines on the edges of the film to basically fix it and ensure uniform shrinkage.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.