What are the body dimensions of the Great Wall Pao Off-Road Edition?
1 Answers
The length, width, and height dimensions of the Great Wall Pao Off-Road Edition are 5489mm/2084mm/1920mm, which are official data. The length of the Great Wall Pao Off-Road Edition refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Great Wall Pao Off-Road Edition has a maximum power of 140kw and a maximum torque of 360 Nm. The maximum power speed of this engine is 4000 to 5500 rpm, and the maximum torque speed is 1800 to 3600 rpm. It is equipped with direct injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. This engine is matched with an automatic transmission (AT). The country has relevant regulations on vehicle dimensions. According to the national standard "GB1589-89", the total width of the vehicle does not include rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data is to provide enough space during overtaking, avoiding accidents or situations where road markings are narrower than the vehicle's width due to excessive width. Additionally, the national regulation stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of relevant public roads.