What are the body dimensions of the Fengjun 7?

1 Answers
VonCaden
07/30/25 2:16am
The body dimensions of the Fengjun 7 are: length 5095mm, width 1800mm, height 1760mm. The cargo box dimensions are: length 1380mm, width 1460mm, height 480mm. It has a wheelbase of 3050mm and features a front-engine, rear-wheel-drive layout. The front suspension uses a double-wishbone torsion bar spring independent suspension, while the rear suspension employs a leaf spring non-independent suspension. The Fengjun 7 is equipped with a 2.0T turbocharged engine paired with a 6-speed manual transmission. This engine delivers a maximum power of 120kW and a peak torque of 330Nm, featuring direct fuel injection technology and using an aluminum cylinder head with an iron cylinder block.
Was this review help?
7
2
Share
More Forum Discussions

Where to Add Windshield Washer Fluid for Volkswagen Lavida?

Volkswagen Lavida's windshield washer fluid filler is located on the right side of the engine compartment. Since windshield washer fluid is a consumable item, it should be checked regularly. There are usually scale marks inside the washer fluid reservoir for reference, so do not exceed these marks when refilling. If you purchase solid concentrated washer fluid tablets, simply open the reservoir cap, fill it with clean water, and then place the solid concentrated washer fluid tablet inside. The Volkswagen Lavida's in-car navigation system features a combination of touch screen and knob control operation, with MP3 playback capability, and supports USB, AUX, and SD card expansion slots for easy and powerful functionality. The LCD screen adopts a foldable design.
12
2
Share

What does the P1116 fault code mean for the 2009 Jetta?

The P1116 fault code for the 2009 Jetta indicates an open circuit in the heated oxygen sensor heater circuit, meaning the sensor has malfunctioned. Causes and solutions for the fault: The causes of the fault include issues with the oxygen sensor itself, its circuit or connectors, leaks in the exhaust manifold or pipe, or faults in the electronic control module. During routine maintenance of the car engine, it is essential to use high-quality lubricating oil, regularly change the oil and filter, ensure good ventilation in the crankcase, and perform regular cleaning. Solution: Check the oxygen sensor and its resistance. In most cases, the sensor is damaged and can be replaced at a 4S shop. Function of the car oxygen sensor: The car oxygen sensor is used to measure the oxygen content in the engine exhaust to adjust the fuel injection, thereby achieving the optimal air-fuel ratio for the car's engine.
20
3
Share

Where is the Buick Excelle air conditioning temperature controller located?

Buick Excelle air conditioning temperature controller is located on the center console, featuring a blue and red knob. This labeled knob is the temperature adjustment knob, while the AC knob serves as the air conditioning switch. The first knob adjusts temperature; the second controls fan speed (turning to 0 turns it off); and the third selects air outlet positions: windshield/head, hands, or feet. The Buick Excelle is a model under General Motors, with body dimensions of 4515mm in length, 1725mm in width, and 1445mm in height. The Excelle features a C-pillar triangular window design that elongates the cabin and provides wider visibility; its high-mounted brake light displays a six-petal floral pattern when braking; the vibrant integrated crystal rear lamps echo the front light design; the rear design combines modern visual aesthetics with practical functionality.
11
5
Share

Where is the expansion valve installed on the Jaguar XJL?

The expansion valve of the Jaguar XJL is generally installed at the inlet of the evaporator. Precautions for installing the expansion valve: The expansion valve is a type of throttling device that can regulate the flow of refrigerant and must be installed before the inlet of the evaporator. In refrigeration systems that use an expansion valve, a liquid receiver-drier must be installed between the condenser outlet and the expansion valve. Composition and function of the expansion valve: The expansion valve roughly consists of three parts: the valve body, the temperature sensing bulb, and the equalizing tube. It has the function of throttling and pressure reduction. Before the refrigerant enters the evaporator, the medium-temperature, high-pressure refrigerant liquid is transformed into a low-temperature, low-pressure wet vapor. The refrigerant then absorbs heat in the evaporator to achieve the refrigeration effect. At the same time, it prevents the compressor from experiencing liquid slugging and abnormal overheating of the evaporator or vapor outlet.
3
1
Share

Will the engine malfunction indicator light illuminate when the Chery E5 is powered on?

When the Chery E5 is powered on, the engine malfunction indicator light will illuminate during the vehicle's self-check upon starting. If the engine is functioning normally, the light will automatically turn off after the engine starts. Principle of the engine malfunction light: The engine malfunction signal is issued by the engine control unit (ECU), which governs all electronic components of the engine, including the electronic throttle, fuel injectors, alternator, fuel pump, etc., covering systems such as intake, exhaust, fuel, ignition, and timing. If the engine malfunction light illuminates, it indicates an abnormality in a specific system. To determine the exact issue, a diagnostic scanner must be used, as each vehicle brand has its own unique fault codes. Persistent engine malfunction light: If the engine malfunction light remains illuminated and does not turn off, it signifies that the engine parameters have deviated from normal. Excessive carbon buildup is a common cause of such parameter changes. If this issue is not addressed, the engine's combustion state cannot be adjusted back to normal, and the malfunction light will remain on without automatically disappearing.
19
1
Share

Is the Jetta VS5 engine high-power?

Jetta VS5 is equipped with a high-power engine. It features a 1.4T high-power engine paired with an Aisin 6-speed automatic transmission. Introduction to Jetta VS5 engine: The Jetta VS5 uses a 1.4-liter turbocharged engine with the model code EA211-DJS. It delivers a maximum torque of 150 horsepower and 250 Nm. This engine can reach 1750-3000 rpm. The engine also incorporates DVVT technology and direct fuel injection, with an aluminum alloy cylinder head and block. Additionally, the transmission options for this engine are a 5-speed manual or a 6AT automatic transmission. Models equipped with the same engine: This engine is widely used in Volkswagen models. Currently, all 1.4T engines in Volkswagen models are of this type, including models such as the Golf, Bora, Sagitar, Lavida, Lamando, T-Roc, Tayron base model, and Tharu.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.