What are the body dimensions of the Dongfeng Peugeot 5008?

What Does Vehicle Emission Standard Mean?

Vehicle emission standards refer to a set of specifically established regulatory standards aimed at controlling the pollutants emitted by vehicles. Most countries around the world have formulated corresponding emission standards. China, drawing from European vehicle emission standards, has established its own national standards. The primary pollutants emitted by vehicles include carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides, and particulate matter (PM), all of which are environmental contaminants that need to be controlled. The sources of vehicle pollutants come from the exhaust pipe, crankcase, and fuel system. To curb the generation of these harmful gases and encourage automobile manufacturers to improve their products, vehicle emission standards are continuously supplemented, refined, and tightened as the number of vehicles increases and environmental conditions worsen. China began implementing the China 6 standard from July 1, 2020. Compared to the China 5 emission standard, the China 6 standard reduces carbon monoxide emissions from gasoline vehicles by 50%, lowers the emission limits for total hydrocarbons and non-methane hydrocarbons by 50%, and tightens the nitrogen oxides emission limit by 42%. These emission standards have now comprehensively surpassed European emission standards. Vehicle owners can check whether their vehicle complies with the China 6 standard through the factory certificate and the vehicle environmental protection information list, or they can log in to the Motor Vehicle Environmental Protection Website to inquire about relevant information.

17

0

Share

What are the disadvantages of full car crystal coating?

Disadvantages: The crystal coating process can wear down the car paint, and after stopping the coating, the paint tends to age faster. Benefits: Crystal coating is currently the most advanced car paint protection solution, offering advantages such as corrosion resistance, scratch prevention, no cracking, and easy cleaning. It can protect the vehicle from minor daily scratches. Even when external forces exceed the elastic protection range of the coating, it usually only leaves scratches on the coating itself without damaging the paint. Duration: Crystal coating provides long-lasting and stable performance, maintaining its protective effect for 1-2 years. However, the cost of crystal coating is relatively high, the process usually takes about 2 days, and it requires high technical skills from the technician.

5

4

Share

What does it mean when 4matic is temporarily unavailable?

4matic temporarily unavailable means there is a malfunction in the all-wheel drive system, causing this function to be disabled. How 4matic works: The core technology of Mercedes-Benz 4MATIC four-wheel drive is the 4ETS differential limiting technology. 4ETS utilizes the automatic braking force distribution function of ABS to achieve differential limiting. When a wheel of this all-wheel-drive vehicle slips, the onboard computer applies braking force to the slipping wheel via ABS to limit its spinning. This allows the differential to transfer the power intended for the slipping wheel to other non-slipping wheels. Advantages and disadvantages of 4matic: Advantages: The 4MATIC all-wheel-drive system is compact, lightweight, and offers optimized friction performance. Compared to other all-wheel-drive systems, its advantages are quite significant. Disadvantages: 4MATIC is mostly suitable for urban roads and has very limited off-road capabilities. Reasons for 4matic being unavailable: Malfunction in the related system control program; failure in power distribution; data transmission failure: this requires specific checks on the wiring and connectors between various systems and components.

19

2

Share

Can the vehicle pass the annual inspection with different tire tread patterns?

Whether a vehicle can pass the annual inspection with different tire tread patterns depends on their positions. If the tread patterns differ between left and right tires, it is not allowed to pass the inspection. However, different tread patterns between front and rear tires are permissible. According to the "Motor Vehicle Safety Technical Inspection Items and Methods": Tires on the same axle should be of the same model, specification, and tread pattern. Tire bolts and axle bolts should be complete and securely fastened. The tire specifications should match the motor vehicle product announcement and the factory certificate (or vehicle registration information for in-use vehicle inspections). The tire tread and sidewall should not have cracks or cuts exceeding 25mm in length or deep enough to expose the tire cord layer, nor any other defects, abnormal wear, or deformations that affect usage. Additional requirements for vehicle tires: The tread depth of passenger cars, motorcycles, and trailers should be no less than 1.6mm, while the tread depth of steering wheels for other motor vehicles should be no less than 3.2mm. The tread depth of all other tires should be no less than 1.6mm, and the tire wear indicators should be visible. Highway buses, tourist buses, school buses, and the steering wheels of other motor vehicles should not be equipped with retreaded tires.

14

3

Share

What are the two parallel white solid lines at an intersection?

Two parallel white solid lines at an intersection are stop lines. They indicate that vehicles should stop and yield to vehicles on the main road at this intersection. Stop lines are usually used in conjunction with stop signs. Below is an introduction to traffic markings: The function of white solid lines is to separate lanes in the same direction, typically painted before traffic lights at intersections. They remind drivers approaching intersections with stop lines to stop or slow down and observe the traffic conditions on the main road. Single yellow solid lines prohibit vehicles from crossing or driving on the line in both directions. They are painted on roads with only one lane or one motor vehicle lane and one non-motor vehicle lane, or on sections where overtaking is prohibited due to other hazards. Double yellow solid lines have the same function as single yellow solid lines, also prohibiting vehicles from crossing or driving on the line in both directions. Double yellow solid lines are painted on roads with two or more motor vehicle lanes in one direction and without a physical central divider. Single yellow dashed lines indicate lane separation, allowing drivers to cross the line for overtaking, turning, etc., under the premise of ensuring the safety of oncoming vehicles and their own safety. Horizontal deceleration markings are a set of parallel white dashed lines used to remind drivers to slow down. Vertical deceleration markings are a set of diamond-shaped dashed lines parallel to the lane dividers.

11

3

Share

What Does Vehicle Third-Party Liability Insurance Cover?

Vehicle third-party liability insurance includes compensation for death and disability; medical expense compensation; and property damage compensation. Third-party liability insurance covers accidental incidents caused by qualified drivers permitted by the policyholder while using the insured vehicle, resulting in direct personal injury, death, or property damage to a third party. Exclusions under third-party liability insurance: Personal injury or death of the policyholder and their family members, as well as loss or damage to property owned or managed by them. Personal injury or death of the driver of the insured vehicle and their family members, as well as loss or damage to property owned or managed by them. Personal injury, death, or property damage to other individuals on the insured vehicle. Individuals covered by motor vehicle third-party liability insurance: Third-party liability insurance refers to others and their property outside the policyholder, their property, and all individuals and property on the insured vehicle. The term 'all individuals' refers to the driver, conductor, loader, passengers, and other individuals on the vehicle—these individuals are not considered third parties. However, after disembarking, except for the driver, they can be regarded as third parties. For private vehicles, the policyholder and their family members are not considered third parties.

5

1

Share

What are the body dimensions of the Dongfeng Peugeot 5008?

What Does Vehicle Emission Standard Mean?

What are the disadvantages of full car crystal coating?

What does it mean when 4matic is temporarily unavailable?

Can the vehicle pass the annual inspection with different tire tread patterns?

What are the two parallel white solid lines at an intersection?

What Does Vehicle Third-Party Liability Insurance Cover?

How to Use the Key to Raise and Lower the Windows on the Envision?

Do I need to sign for confirmation if I fail Subject 2?

Can I Get a Refund If I No Longer Need a Shanghai License Plate?

What procedures are required for car transfer?