What are the body dimensions of the Buick GL8 Avenir?

1 Answers
MartinFitz
07/30/25 4:45am
Buick GL8 Avenir body dimensions are 5219mm in length, 1878mm in width, and 1799mm in height, with a wheelbase of 3088mm. The Buick GL8 Avenir is an MPV model under the Buick brand, equipped with the new LSY engine, which is a brand-new 2.0-liter turbocharged engine from the General Motors group. The LSY engine in the Buick GL8 Avenir delivers 237 horsepower and a maximum torque of 350 Nm. This engine features variable valve management and direct fuel injection technology, and uses an aluminum alloy cylinder head and block. Paired with this engine is the new 9-speed automatic transmission. The Buick GL8 Avenir uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
18
4
Share
More Forum Discussions

Does the S Gear Still Require Manual Gear Shifting?

S Gear does not require manual gear shifting. The S Gear mode is a sport mode, also known as the overtaking gear mode, where manual upshifting or downshifting is unnecessary. The transmission will automatically upshift as the engine speed increases. In this mode, the transmission is tuned for high RPM and low gear, making it suitable for overtaking and uphill driving. Under S Gear sport mode, the transmission can shift freely, but the shifting timing is delayed to keep the engine at high RPM for a longer duration, thereby delivering greater torque output and acceleration. Precautions for using S Gear: 1. Since S Gear only delays upshifting without altering other operational aspects, it inevitably increases the transmission load in the short term, leading to higher temperatures and accelerated wear. Therefore, avoid prolonged use of S Gear. 2. For vehicles frequently driven in congested urban areas, engine carbon buildup tends to be more severe. Periodically using S Gear appropriately helps remove carbon deposits from the engine, improving fuel economy and extending engine lifespan.
3
1
Share

Is Baojun's machinery a joint venture?

Baojun is a joint venture car. The following is a related introduction about Baojun: 1. Baojun is an independent automobile brand created by SAIC-GM-Wuling in 2010. SAIC-GM-Wuling officially released the new passenger car brand "Baojun Automobile", marking the formal entry of this Chinese microcar leader into the booming sedan market. The origin of the Baojun brand: The original meaning of "Jun" is a fine horse, and Baojun is people's most beloved fine horse. 2. The Baojun 730 is a home-use MPV product under the Baojun brand of SAIC-GM-Wuling. The car was officially launched in the second half of 2014. The overall design of the Baojun 730 adopts a style similar to that of the Baojun 630. The car adopts a seven-seat layout, with a maximum cargo space of 1680L.
9
3
Share

Where is Zongshen's place of origin?

Zongshen's two-wheel motorcycle factory is located in Chongqing. There is also a joint venture Zongshen Piaggio in Foshan, Guangdong, and another Zongshen three-wheel motorcycle factory in Xuzhou, Jiangsu, etc. Zongshen: Zongshen Industrial Group was founded in 1992 by founder Zuo Zongshen. It is a large private high-tech industrial, commercial and trade group integrating research, development, manufacturing and sales, with 30 wholly-owned and holding subsidiaries including the listed company Zongshen Power. Zongshen's business scope: First is the manufacturing sector, including motorcycle engines, general power machinery, mini vehicle engines, marine engines, small aviation power, motorcycles, electric vehicles, and key motorcycle components. It has an annual production capacity of 2 million motorcycles, 4 million motorcycle engines, 100,000 mini vehicle engines, and 5 million general machinery products.
19
2
Share

What is the sequence for parking and turning off the engine in Subject 3?

The sequence for parking and turning off the engine in Subject 3 is as follows: When the examinee hears the instruction to pull over, they should turn on the right turn signal, observe the right lane, and pull over after confirming it is safe. After the vehicle comes to a complete stop, shift to neutral, engage the handbrake, release the clutch and brake pedals, reset the lights, turn the key to the OFF position, remove the seatbelt, check for pedestrians behind using the rearview mirror, and then open the door to exit the vehicle. The test content for Subject 3 includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning at intersections, meeting oncoming vehicles, overtaking, making U-turns, and night driving.
8
0
Share

Does the T-Roc Comfort Edition have an automatic retractable mirror function?

The T-Roc standard version does not have an automatic folding function for the rearview mirrors. Only the top-tier two-wheel-drive Luxury model and the four-wheel-drive Luxury model are equipped with electric folding rearview mirrors. The function of electric folding rearview mirrors: Rearview mirrors with a folding function can retract when passing through narrow sections, improving the vehicle's passability. When the driver leaves the car, the mirrors can also be folded, not only protecting the mirror surface but also reducing parking space and effectively avoiding scratches. Working principle of electric folding rearview mirrors: When the folding function is activated, the substrate is rotated onto the central shaft of the pin by the electric folding motor. The protruding structure on the upper surface prevents the positioning block from rotating with the electric folding motor. The spring and elastic ring do not rotate with the substrate due to the compression of the spring. The electric folding motor itself does not have a limit stop function; the folding is controlled by a limit structure.
12
4
Share

What is the engine model of the Focus?

The 1.0T engine model of the Focus is CAF372WQ25, the 1.5L engine model is CAF384Q15, the 1.5T engine model is GTDIQ75, and the 1.6L engine model is C6. The Focus is a Ford A-segment family car. In terms of body dimensions, its length, width, and height are 4378mm, 1810mm, and 1468mm respectively, with a wheelbase of 2705mm. Regarding the suspension, the front suspension of the Focus uses a MacPherson independent suspension, while some models use a torsion beam non-independent suspension for the rear suspension.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.