What Are the Advantages of Goodyear Tires?

Is there no environmental protection label for vehicle annual inspection now?

There is still an environmental protection label for vehicle annual inspection. The following is a specific introduction to the annual inspection label symbols: 1. Vehicle inspection symbols: There are three types of windshield label symbols, compulsory insurance label, annual inspection label, and environmental protection label. 2. Placement of inspection qualification symbols: When driving on the road, the vehicle should display the license plate, place the inspection qualification label and insurance label, and carry the vehicle driving license. If the vehicle fails to place the inspection qualification label and insurance label as required, a fine will be imposed and 1 point will be deducted. Forging, altering, or using other vehicle insurance labels will result in a fine and the vehicle will be impounded.

6

2

Share

Why is the fuel consumption of the 2008 Buick LaCrosse so high?

The 2008 Buick LaCrosse has an average fuel consumption of 9-13L per 100 kilometers, which is considered mid-range in terms of fuel efficiency. However, actual fuel consumption depends on various factors, so specific fuel usage should be based on real-world conditions. Below are the main factors that affect fuel consumption: Unnecessary additional load on the vehicle: Many new car owners tend to overload their vehicles with various decorations and exterior accessories, sometimes even moving their office or home items into the car. Blindly installing large body kits, spoilers, winches, or roof racks can also increase fuel consumption. Every additional kilogram of weight leads to a corresponding rise in fuel usage. Therefore, it is advisable to decorate your car within reasonable limits. If you’ve already fallen into the trap of excessive decoration, it’s best to reduce the load on your vehicle as soon as possible. Driving at low gear with high speed or high gear with low speed: This issue is more common among new drivers. Often, the vehicle’s speed is already high, but the gear hasn’t been shifted up accordingly. As the engine RPM increases, fuel consumption naturally spikes. To avoid this, drivers should refer to the appropriate speed and gear for optimal shifting. On the other hand, driving at low speed while staying in a high gear is another problem. The most obvious signs of this are engine and body vibrations, with the risk of stalling. Some drivers may respond by pressing the accelerator harder, which increases fuel injection. The best solution in this case is to downshift.

2

0

Share

What is the torque standard for car wheel bolts?

Car wheel bolt torque standards vary depending on the vehicle model, and the specific values should be checked in the manual. Here are some relevant details: 1. General situation: For household passenger cars, it is generally 90-110N, which means a one-meter lever with 9-11 kilograms of force. However, some modern cars use bolts instead of the traditional nuts, and the torque should be smaller because the bolts have conical surfaces—over-tightening may cause the wheel hub to crack. 2. Torque specifications: Whether the wheel is steel or aluminum, generally, using the original car's lug wrench with a 20cm extension and right-arm pressure is sufficient.

17

2

Share

What Are the Precautions for Charging New Energy Vehicles?

New energy vehicle charging precautions are as follows: After exposure to high temperatures: Do not charge immediately after prolonged exposure to high temperatures. Extended exposure causes the power box temperature to rise, leading to increased battery temperature. Charging immediately can accelerate the aging and damage of internal wiring. Avoid charging during thunderstorms: Do not charge during thunderstorms. When rain is accompanied by lightning, never charge to avoid lightning strikes, which could cause combustion accidents. Do not turn on the air conditioning while charging: It is not recommended to use the air conditioning inside the vehicle while charging. Turning on the air conditioning during charging increases the internal charge load on the battery, accelerates the degradation of the power battery pack, and reduces battery lifespan. Choose compliant charging stations: Select charging stations that comply with national standards. This not only protects your vehicle's battery but also ensures your safety.

11

2

Share

What gear should be used for automatic transmission vehicles when wading through water?

Automatic transmission vehicles can engage low gear and press the accelerator to wade through water. If encountering obstacles ahead while passing through waterlogged sections, the driver can shift to neutral and press the accelerator to maintain engine speed, avoiding releasing the throttle as much as possible to prevent water from entering the exhaust pipe and causing the engine to stall. If the engine stalls during the process, do not attempt to restart the engine or tow the vehicle in gear; it must be towed back to the repair shop in neutral. Below is an introduction to the gears of an automatic transmission vehicle: 1. L gear: Low gear, which limits speed. When climbing a slope, engaging this gear maintains a state of high RPM and low gear. 2. S gear: Sport mode, where the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer period, allowing the car to move at low gear and high RPM for an extended time. 3. D gear: Drive gear, used for forward movement of the car. 4. N gear: Neutral gear, used during brief stops. 5. P gear: Parking gear, used when parking; placing the gear in P stops the car's braking system, preventing rolling. 6. R gear: Reverse gear, used when reversing. However, R gear can only be engaged when the vehicle is completely stopped. Engaging R gear while the car is moving slowly can cause severe damage to the transmission.

15

0

Share

Reasons for the Cooling Warning in the Camry Hybrid Battery

Battery malfunction or obstruction of the cooling vents by rear floor mats may be the cause, necessitating corresponding inspection and repair. Below are specific details about the Camry: 1. Body dimensions: The latest top-trim Camry measures 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. 2. Powertrain configuration: The Camry is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 178Ps, maximum power of 131kW, and maximum torque of 221N·m, paired with an E-CVT continuously variable transmission. Additionally, it features an electric motor with a maximum horsepower of 120Ps and maximum power of 88kW.

6

2

Share

What Are the Advantages of Goodyear Tires?

Is there no environmental protection label for vehicle annual inspection now?

Why is the fuel consumption of the 2008 Buick LaCrosse so high?

What is the torque standard for car wheel bolts?

What Are the Precautions for Charging New Energy Vehicles?

What gear should be used for automatic transmission vehicles when wading through water?

Reasons for the Cooling Warning in the Camry Hybrid Battery

Why can't the Lamando use the key for one-touch window operation?

Can I Drive Without a Physical Driver's License Using an Electronic One?

How long can a vehicle's annual inspection be overdue in 2021 without consequences?

Where is the Accelerator Pedal Located?