What are the 4 methods to reset the tire pressure monitoring light?

2 Answers
StNadia
07/24/25 9:12am
There are 4 methods to resolve the issue of the tire pressure monitoring light being on: 1. Turn off the engine and restart the vehicle after 1 to 2 minutes; 2. Inflate or deflate the tire pressure and observe the tire pressure light display on the vehicle's dashboard; 3. Locate the settings button on the car's central control panel to reset the tire pressure; 4. Use a specialized diagnostic tool to clear the fault code. The reason for the tire pressure light being on is that the car's tire pressure is either too high or too low. It is necessary to check if the tires have punctures or damage causing air leaks, and a tire pressure gauge can be used to check the pressure of each tire. Generally, the tire pressure range for drive wheels is 2.3 to 2.7 bar, and for non-drive wheels, it is 2.2 to 2.5 bar.
Was this review help?
10
0
Share
IsabelaFitz
08/11/25 4:34am
As a seasoned driver with years of experience, I've encountered the tire pressure monitoring light coming on several times. Here are four common solutions: First, promptly check the tire pressure of all tires using a tire pressure gauge. Usually, the pressure is low and needs to be inflated. Sometimes the light will turn off automatically after topping up to the standard value. Second, if the light remains on after inflating, find a safe place to park and reset the tire pressure monitoring system according to the vehicle manual. Many cars have a small button or menu operation on the dashboard, which is quite easy to do. Third, if the light stays on after resetting, it might be a faulty sensor, such as a dead battery or being knocked loose. You can do a preliminary check around the tires. The fourth scenario is more complex, like wiring issues or system malfunctions. In such cases, it's best to drive to a repair shop and have it checked by professionals, rather than risking safety by trying to fix it yourself. I always address the light immediately when it comes on, as driving on the highway with tire issues is very dangerous. I also make it a habit to check tire pressure monthly to avoid frequent warning light annoyances. Safety always comes first when driving.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

Does the dash cam still work when the car is turned off?

The dash cam will stop working when the car is parked, but a small number of dash cams will continue to operate. Here is relevant information: 1. Whether it works depends on which vehicle wire the dash cam is connected to. Some factory-installed dash cams are connected to constant power, in which case they won't automatically turn off and can record 24/7. If connected to ACC, it will automatically shut off when the engine is turned off. 2. A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can record the entire driving process in video and audio, providing evidence for traffic accidents. For those who enjoy self-driving tours, it can also be used to document the process of overcoming difficult and dangerous roads.
2
5
Share

How many cylinders does the Lynk & Co 05 engine have?

The Lynk & Co 05 is equipped with a four-cylinder engine. Here are some details about the Lynk & Co 05: 1. In terms of power, the Lynk & Co 05 comes standard with the Drive-E series 2.0TD high-power engine. For the transmission system, it is paired with an Aisin 8-speed automatic transmission, sharing the same powertrain as the performance model Lynk & Co 03+. 2. The 2.0T turbocharged engine in the Lynk & Co 05 delivers a maximum power of 187 kW and a maximum torque of 350 N·m, achieving a 0-100 km/h acceleration time of just 6.7 seconds, providing drivers with an acceleration experience that surpasses its class. The car's 100-0 km/h braking distance reaches sports car levels, further enhancing driving safety. 3. Thanks to the engine's lightweight design, the vehicle also features an advanced thermal management system, an intelligently controlled electric water pump, and fuel secondary injection technology, comprehensively improving fuel efficiency and achieving the dual advantages of low fuel consumption and low emissions.
20
4
Share

What cars have logos starting with the letter P?

Cars with logos starting with the letter P include the Panamera. The Panamera is a large five-door, four-seat hatchback under the Porsche brand. Taking the 2021 Panamera Executive Long Wheelbase as an example, it falls into the large car category with body dimensions of 5199mm in length, 1937mm in width, and 1428mm in height, with a wheelbase of 3100mm and a trunk capacity ranging from 495 to 1483 liters. The 2021 Panamera Executive Long Wheelbase is equipped with a 2.9T twin-turbocharged engine, delivering a maximum power of 243kW at 5400 to 6400 rpm and a maximum torque of 450Nm, paired with an 8-speed dual-clutch transmission.
8
4
Share

How to Remove Rain Stains from a White Car?

The methods to remove rain stains from a white car are: 1. Wash the car thoroughly and dry it; 2. Soak a towel in water, wring it slightly, and apply some essential balm to the towel; 3. Gently wipe the stained areas of the car with the towel soaked in essential balm, repeating every 2 minutes until the stains disappear. The maintenance methods for a white car are: 1. Clean dust off the car body promptly before, during, and after use to reduce static electricity's attraction to dust; 2. Rain stains on the car body will gradually shrink after rain, increasing the concentration of acidic substances in the rainwater, so rinse with clean water as soon as possible to avoid damaging the paint; 3. Use dedicated car wash detergent and neutral water for washing, avoiding highly alkaline detergents or soaps to prevent stripping the protective oils from the paint and accelerating paint aging.
8
5
Share

How Early Can the Annual Inspection Sticker Be Obtained?

Annual inspection stickers can be obtained three months in advance. The annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for vehicles based on the technical conditions for safe operation of motor vehicles. The inspection helps promptly eliminate potential safety hazards, encourages enhanced vehicle maintenance, and reduces the occurrence of traffic accidents. The inspection items include: 1. Checking whether the engine, chassis, body, and their accessories are clean, complete, and functional, and whether the paint surface is uniform and aesthetically pleasing; 2. Testing the vehicle's braking performance, steering control, lighting, exhaust, and other safety features; 3. Verifying whether the vehicle has been modified, altered, or transformed, and whether the registration details on the driving license, license plate, and vehicle records match the actual condition of the vehicle.
14
5
Share

Is the XTS Front-Wheel Drive or Rear-Wheel Drive?

The Cadillac XTS adopts a front-engine, front-wheel-drive layout. Here are relevant details about Cadillac: 1. The XTS stands as the sole front-wheel-drive model in Cadillac's lineup. Its comprehensive intelligent monitoring system, including lane change assistance, front vehicle distance monitoring, lane departure warning, and other alerts, functions exceptionally well. The vehicle provides warnings through seat vibrations to notify drivers of changes in left-rear vehicles and left lane conditions, delivering a strong sense of security during driving. 2. Front-wheel-drive vehicles, with their transversely mounted engines, save cabin space. Additionally, the absence of a driveshaft found in rear-wheel-drive vehicles results in lower energy loss and relatively higher transmission efficiency. 3. In rear-wheel-drive vehicles, power is transmitted from the engine to the rear wheels via the driveshaft, with the rear wheels handling propulsion while the front wheels manage steering. 4. The driving experience differs between front-wheel-drive and rear-wheel-drive vehicles. Typically, you'll feel front-wheel-drive cars being "pulled" by the front two wheels, whereas rear-wheel-drive cars feel "pushed" by the rear two wheels.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.