What are some lazy answering techniques for Subject One?

1 Answers
StAndrew
07/30/25 5:29am
Subject One lazy answering techniques are as follows: Priority principle: Turning vehicles yield to straight-moving vehicles, at intersections without traffic signals yield to vehicles coming from the right, and right-turning vehicles yield to left-turning vehicles. Summary of no-parking zones: Station 3, intersection 5; when exiting the highway, prepare 500 meters in advance. Explanation: Within 30 meters of stations (bus stops, ambulance, fire, gas stations), parking is prohibited, and within 50 meters of accident-prone areas (such as intersections, tunnel entrances, turns, before steep slopes). Traffic signs: Traffic signs are divided into two main categories: main signs and auxiliary signs. Main signs include warning signs, prohibition signs, instruction signs, and directional signs.
Was this review help?
1
1
Share
More Forum Discussions

What causes jerking sensation during acceleration in a BMW 740?

BMW 740 experiences jerking sensation during acceleration due to reasons such as excessive carbon buildup in the throttle, substandard fuel quality, and differences between vehicle models. Detailed explanations of the causes: Excessive carbon buildup in the throttle: Carbon deposits can cause various malfunctions. In some vehicles, they may lead to jerking sensations. Regular carbon cleaning is recommended. Substandard fuel quality: Poor or incompatible fuel quality results in incomplete combustion. Different vehicle models: Manual transmission: When driving with the clutch partially engaged, accelerating or decelerating can cause jerking sensations. The deeper the throttle is pressed, the more pronounced the jerking becomes. Automatic transmission: Slight jerking may occur during upshifting under acceleration, and it becomes more noticeable when forcefully downshifting and then upshifting with heavy throttle input.
8
4
Share

What does the P displayed on a car mean?

The P displayed on a car indicates the parking brake is engaged, meaning the parking brake is in operation. The parking brake, commonly referred to as the handbrake, is a manual brake installed in motor vehicles. It is used to stabilize the vehicle after it has come to a stop, preventing accidents caused by the vehicle rolling on inclined surfaces. The function of the parking brake is to secure the vehicle when parked on flat or inclined surfaces, preventing it from moving unintentionally when unattended. It operates by using a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Precautions for using the parking brake: 1. Avoid pulling it too tightly to prevent system damage; 2. Avoid using the handbrake for long-term parking on slopes; 3. Do not engage the handbrake while driving at high speeds; 4. Always release the handbrake before starting the car.
14
0
Share

What to Do When the Trunk of a Kia K3 Won't Open?

Solutions for when the trunk of a Kia K3 won't open: 1. If the car is in a locked state, both the doors and the trunk will be locked, making it impossible to open. In this case, simply unlocking the vehicle will allow the trunk to open normally. 2. If the car has been involved in a collision causing the trunk latch to deform, the trunk may also fail to open. This situation requires repairing or replacing the trunk. 3. If the trunk latch is stuck, the trunk may be difficult to open due to friction. Applying lubricant to the latch position can resolve this issue. The Kia K3 is a vehicle under Dongfeng Yueda Kia, featuring a new powertrain based on the Smartstream IVT architecture. Its 1.5L high-efficiency engine achieves a combined fuel consumption of as low as 5.1L per 100km, ensuring excellent fuel economy.
5
3
Share

What are the causes of Audi engine starting system failure?

The causes of Audi engine starting system failure are: issues with the computer board. Use a computer to enter the system for fault detection, then repair according to the fault indications. If there are no faults, the computer can directly clear the fault. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, and a wheelbase of 3024mm. The 2020 Audi A6 features a five-link independent front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, a maximum power of 140kW, a maximum torque of 320Nm, and is paired with a 7-speed dual-clutch transmission.
10
1
Share

How to Replace the Cabin Air Filter of Huansu S7?

Huansu S7's cabin air filter replacement method is as follows: 1. Use a flat-head screwdriver to remove the clips on both sides of the glove box and open the outer cover on the back of the glove box; 2. Use appropriate tools to remove the damper connected to the glove box, then remove the glove box to reveal the cabin air filter housing cover, and pull it out; 3. Insert the new filter into the air conditioning compartment and reinstall the glove box. The Huansu S7 is positioned as a mid-size 7-seat SUV, with dimensions of 4800mm in length, 1850mm in width, and 1760mm in height, and a wheelbase of 2780mm. The vehicle is equipped with an ADAS advanced driver assistance system, integrating two active safety features: blind spot monitoring and lane departure warning, which can effectively avoid hazards caused by blind spots and incorrect driving.
19
1
Share

Where are the position lights?

Position lights are located at the high positions on the front and rear of the vehicle. The front position lights are next to the two headlights, while the rear position lights are usually integrated with the brake lights. Position lights are primarily used during driving in dusk, overcast, rainy, or foggy conditions to indicate the width and height of the vehicle, helping other drivers judge relative positions and vehicle size during encounters or overtaking. Typically, the color of position lights is white in the front and red in the rear. Functions of position lights: 1. They make the vehicle more easily identifiable during daytime driving; 2. When the vehicle is turning, the position lights are turned on to alert surrounding vehicles and pedestrians; 3. They provide road illumination during nighttime driving.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.