···
Log in / Register

The Difference Between Manual and Automatic Transmissions

1 Answers
DeMiguel
07/29/25 6:17pm

Here are the differences between automatic and manual transmissions: 1. The main difference lies in the type of transmission used. Manual transmission vehicles use manual gearboxes, while automatic transmission vehicles use automatic gearboxes. 2. A manual transmission requires the driver to manually shift gears by operating the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed changes. An automatic transmission, on the other hand, does not require the driver to manually shift gears; the transmission automatically selects the appropriate gear based on driving conditions. 3. There are significant differences in usage and structure between automatic and manual transmissions. Firstly, all operations of a manual transmission are performed by the driver, making it less convenient than an automatic transmission. However, manual transmissions have advantages such as simple structure, low manufacturing cost, cheaper maintenance, lower failure rate, higher transmission efficiency, and better fuel economy.

Was this review help?
11
3
Share
More Forum Discussions

Why can't the Haval H2 start with one key?

Haval H2's one-key start not responding is generally due to situations such as a depleted smart key battery, insufficient battery voltage, or not shifting the gear back to the P/S position when parking. Below are the related explanations for the failure to start with one key: Depleted smart key battery: This situation is most likely due to a depleted smart key battery, where the start system cannot detect the weak radio waves emitted by the smart key. It is recommended to place the smart key on the start button and then press the button to start. Insufficient battery voltage, no power, or battery damage: Failure to start may be caused by a depleted battery due to reasons like leaving the headlights on for an extended period or the battery reaching the end of its lifespan. Generally, the battery should be replaced in time according to the maintenance manual. If the battery is dead, you can use another battery to start the car or find a few people to use the universal push-start method.
18
3
Share

What are the differences between the 9th and 9.5th generation Honda Accord?

The differences between the 9th and 9.5th generation Accord lie in the light source of the headlights. In terms of models, the 9.5th generation Accord 2.0 Luxury version still features a rear multi-link independent suspension. There are no differences in other aspects. Below is more information about the Accord: Headlights: The headlights of the 9th generation Accord emit a granular light, while the 9.5th generation Accord's headlights produce a striped light. Additionally, the 9.5th generation's light source is brighter and has a longer range. Interior: It features new genuine leather seats and a high-performance air filter capable of filtering PM2.5. The car is equipped with a newly upgraded 7.7-inch multi-purpose information display screen, which efficiently and clearly shows specific vehicle conditions. It can simultaneously display fuel consumption, mileage, remaining range, and audio information on a single screen. Powertrain: The Accord continues to be powered by a 2.0L/2.4L naturally aspirated engine. The 2.0L engine delivers a maximum power of 155 horsepower and a peak torque of 190N•m, while the 2.4L engine offers a maximum power of 186 horsepower and a peak torque of 243N•m.
1
3
Share

When Will Lexus Be Domesticated in China?

There is no accurate information on when the Lexus brand will be domestically produced in China, and we still need to wait for official announcements from Toyota. Here is more detailed information about Lexus configurations: Exterior: Large-sized air intake grille with a black body color. Interior Configurations: The Lexus ES aligns with the demeanor of an executive sedan. In terms of body dimensions, it shows significant improvements compared to the current model, with a 60mm increase in length, 45mm in width, and a 50mm extension in wheelbase. Interior: Warm color tones paired with leather materials. Abundant straight lines.
8
3
Share

Where is the USB port on the Baojun 730?

The USB port on the Baojun 730 is located next to the cigarette lighter in front of the gear shift lever. Below is an introduction to the usage and precautions for the USB interface: Function of the USB interface: Utilizing the standard power supply in the car, the USB interface can charge DC-5V electrical devices or serve as a fixed power supply interface for electrical equipment. The USB interface, as part of the vehicle's transmission line, offers advantages such as fast transmission speed, ease of use, support for hot-swapping, flexible connectivity, and independent power supply. Precautions for using the USB interface: Charging should only be done when the car's engine is running to avoid damage to electrical devices due to unstable power supply. Avoid connecting too many devices to prevent overloading, which could damage the car's battery and alternator.
13
5
Share

What are the parking judgment criteria for Subject 2?

In Subject 2, if the car stops for more than 2 seconds, it is considered an intermediate stop. The required materials and test content for Subject 2 are as follows: Materials required for the Subject 2 test: ID card, admission ticket, mobile phone, wallet, and seat cushion. Before the test, you can check whether all items are brought. Missing items may affect the test. If the student is tall enough, the seat cushion can be optional. Subject 2 test content: For large buses, tractors, city buses, medium-sized buses, and large trucks, the test includes pile test, fixed-point parking and starting on slopes, parallel parking, passing single-plank bridge, curve driving, right-angle turning, passing width-limited gate, passing continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) days, slippery roads, and emergency handling.
10
4
Share

How to Understand Car Tire Pressure?

How to know the tire pressure of a car? The methods are as follows: We can determine whether the tire pressure is normal based on the contact condition of the tire tread. By visually observing the number of tire treads in contact with the ground, if the number of treads in contact matches the number we previously recorded under normal tire pressure, then the tire pressure of our car is normal. If the number of treads in contact is more than this, it indicates that the tire pressure is too low; if it is less, it means the tire pressure is too high. The number of treads in contact under normal tire pressure varies for different cars. For one car, the normal number of treads in contact is 3-4. If the number exceeds 4, it means the tire pressure is too low; if it is fewer than 3, it indicates the tire pressure is too high. Under normal circumstances, when observing the tire at normal pressure, visually estimate the contact area between the tire and the ground from the side. A 375px contact area is under normal tire pressure and can be used as a benchmark. If it is less than 375px, the tire pressure is too high; if it is more than 375px, the tire pressure is too low.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.