Tanyue SOS Emergency Call Function Malfunction?

Can You Release the Clutch Directly When Shifting from First to Second Gear?

You should not release the clutch quickly when shifting from first to second gear, as doing so will cause the car to lose smooth operation. Power transmission should be linear rather than abrupt. Relevant explanations are as follows: The correct operation for shifting from first to second gear is to press the accelerator more after starting in first gear, quickly increase the speed to ensure no gear dragging after shifting into second gear. When releasing the clutch after shifting into second gear, do not release it completely at once. Instead, first lift the clutch to the semi-engagement position, where the transmission will synchronize with the engine speed. This process is very quick, taking almost less than a second to complete, and then fully release the clutch and press the accelerator to continue driving. This ensures a very smooth transition. Releasing the clutch too quickly can easily cause severe body shaking and may lead to stalling, mainly because the fuel supply cannot keep up with the speed of releasing the clutch.

18

3

Share

The car air conditioner pressure is normal but not cooling, what could be the reason?

The reasons why the car air conditioner pressure is normal but not cooling are as follows: 1. Excessive refrigerant: First, too much refrigerant leads to insufficient cooling capacity. This is usually caused by overfilling during maintenance, as the refrigerant in the air conditioning system must not be overfilled. Otherwise, it will affect the car's heat dissipation. Therefore, if too much cooling oil is added during maintenance, the heat dissipation of the cooling system will also decrease. 2. Excessive impurities in the cooling oil: Too many impurities in the refrigerant and cooling oil result in insufficient cooling capacity. Just like a household air conditioner, if the blockage is severe, cold air will not come out naturally. Therefore, during maintenance, it is best to choose genuine refrigerant from a 4S shop and avoid purchasing unverified products. 3. Air entering the system: Air in the system is also one of the reasons for insufficient cooling capacity. Once air enters the air conditioning system, the pressure in the refrigerant pipes will be too high. Then, if the refrigerant circulation is poor, it will lead to insufficient cooling. These issues are mainly caused by poor sealing performance of the cooling system or incomplete vacuuming during maintenance.

3

2

Share

What is the Difference Between a Turboprop Engine and a Turbofan Engine?

The differences between a turboprop engine and a turbofan engine are as follows: 1. Operating Principle: In a turbofan engine, the fan is coaxially arranged with the core engine, and the angle of attack (fixed pitch) of the fan blades is unchangeable. In a turboprop engine, the propeller blades are generally arranged parallel but not coaxially with the core engine, and the angle of attack (variable pitch) of the propeller blades is adjustable. 2. Speed: The fan of a turbofan engine is usually directly driven by the low-pressure turbine, generally operating at the same speed. The propeller blades of a turboprop engine are typically driven by the turbine through a gear reduction system, resulting in a propeller speed lower than the turbine speed. The fan blades of a turbofan engine operate at supersonic speeds at the tips, relying on shock waves to compress air and enhance thrust. In contrast, the propeller blades of a turboprop engine operate at subsonic speeds, primarily generating thrust through the angle of attack of the blades.

6

3

Share

How Can a Self-Built Car Be Allowed on the Road?

A self-built car must pass the national design finalization inspection and production finalization inspection, be included in the national motor vehicle sales catalog, and complete the licensing procedures to obtain a driving license before it can be driven on the road. Below is relevant information about cars: 1. Overview: According to the latest national standard in China, 'Terms and Definitions of Types of Automobiles and Trailers' (GB/T-3730-1-2001), a car is defined as follows: A vehicle powered by a motor, with four or more wheels, not running on rails, mainly used for carrying passengers and/or goods; towing vehicles carrying passengers and/or goods. 2. Classification: Passenger cars: Passenger cars are primarily designed and technically characterized for carrying passengers and their personal belongings and/or temporary items, including the driver's seat, with no more than nine seats in total. Passenger cars are divided into the following 11 types. Mainly including: standard passenger cars, convertible passenger cars, luxury passenger cars, compact passenger cars, roadsters, hatchback passenger cars, station wagons, multi-purpose passenger cars, forward control passenger cars, off-road passenger cars, and special-purpose passenger cars; Commercial vehicles: Commercial vehicles are designed and technically characterized for transporting passengers and goods and can tow trailers, but passenger cars are not included. Mainly including: buses, semi-trailer tractors, and trucks.

2

4

Share

What Are the Reasons for Difficulty in Accelerating an Automatic Transmission Car?

Automatic transmission cars may experience difficulty in accelerating due to engine malfunctions, transmission failures, or excessively dirty components. Below are the specific causes and solutions for acceleration difficulties in automatic transmission cars: Specific causes of acceleration difficulties in automatic transmission cars: Engine malfunction: Park the car on level ground, place the transmission lever in the P position, engage the handbrake, and press the accelerator pedal to check the engine's acceleration. If the engine speed increases slowly or cannot rise beyond a certain point, the issue may stem from the engine. Inspect the engine's fuel supply pressure, cylinder pressure, fuel injection system, and the functionality of various sensors. Transmission failure: This could be due to severely worn or burnt friction plates inside the transmission, or malfunctions in the transmission valve body's shift valves, solenoids, transmission control computer, or related circuits, leading to difficulties in upshifting and acceleration. Solutions for acceleration difficulties in automatic transmission cars: Use an automotive diagnostic scanner to check for fault codes; resolving these faults can often fix the issue. Inspect the vehicle's spark plugs for erosion and replace them if damaged. Check the air filter and throttle body for dirt buildup, as excessive dirt can cause inaccurate throttle position signals, necessitating cleaning of the air filter and throttle body.

15

5

Share

What are the reasons for Volkswagen car air conditioning not cooling?

Reasons for Volkswagen car air conditioning not cooling: 1. Insufficient or too little refrigerant: A common reason for car air conditioning not cooling is insufficient or too little refrigerant, which is likely caused by minor leaks. 2. Excessive refrigerant: Too much refrigerant can also cause the air conditioning not to cool. There is a required proportion of refrigerant in the air conditioning system. If the proportion is too high, it can affect heat dissipation. Similarly, adding too much cooling oil during maintenance can also reduce the heat dissipation of the cooling system. 3. Loose drive belt of the car air conditioning compressor: Car cooling relies on refrigerant, and refrigerant transmission depends on the air conditioning compressor. The drive belt is an important moving part that drives the compressor. If the drive belt is loose, the compressor may slip during operation, reducing transmission efficiency, lowering the compressor speed, and decreasing the delivery of compressed refrigerant, leading to the air conditioning not cooling. 4. Substandard refrigerant and freezing oil: Excessive impurities in the refrigerant and freezing oil can also clog the car air conditioning filter, causing the air conditioning not to cool. Increased resistance reduces the flow of refrigerant to the expansion valve, resulting in insufficient cooling capacity. 5. Moisture infiltration in the cooling system: If moisture enters the car air conditioning cooling system, it can cause insufficient cooling or no cooling at all.

6

2

Share

Tanyue SOS Emergency Call Function Malfunction?

Can You Release the Clutch Directly When Shifting from First to Second Gear?

The car air conditioner pressure is normal but not cooling, what could be the reason?

What is the Difference Between a Turboprop Engine and a Turbofan Engine?

How Can a Self-Built Car Be Allowed on the Road?

What Are the Reasons for Difficulty in Accelerating an Automatic Transmission Car?

What are the reasons for Volkswagen car air conditioning not cooling?

What is the actual fuel consumption of the Roewe RX5 ePlus?

Is a Broken Speed Sensor Serious?

Why are all the warning lights on in the Roewe RX5?

What are the regulations for vehicle inspection twice a year?