Should the reversed tire be reinstalled correctly?

What is the detailed explanation of the button icons for the 2020 Highlander?

The following is a detailed explanation of the button icons for the 2020 Highlander: 1. Center Console Buttons: (1) Vehicle Stability Control (VSC): Can be manually turned off in conditions like rain, snow, or muddy roads. Normally, it should be kept on to prevent skidding or tailspin. (2) Parking Radar/Image: The center display shows the rearview image, and the radar will sound an alarm when detecting nearby obstacles. (3) Recirculation/Fresh Air: Recirculation means the air inside the car is circulated in a closed loop, while fresh air mode allows air exchange between the inside and outside of the vehicle. Generally, use recirculation in heavy traffic or when the outside air quality is poor. On highways, switch to fresh air mode every hour or so to replenish oxygen and prevent hypoxia. (4) Auto Hold: At traffic lights, this feature relieves foot fatigue by automatically locking the wheels with the brake calipers. Pressing the accelerator pedal will unlock the wheels, allowing the vehicle to continue moving. 2. Door Buttons: The driver's door of the Toyota Highlander has a rear window lock button, one-touch window control switches, side mirror adjustment switches, and a central lock button. 3. Roof Buttons: Sunroof switch, light switch, sunshade switch, and welcome light.

12

4

Share

What is the reason for water ingress in Volkswagen Lavida on rainy days?

The reason for water ingress in Volkswagen Lavida on rainy days is poor sealing of the rubber strips on the car doors. The door sealing system mainly targets two areas: 1. Sealing of the door opening area: This is primarily achieved by an inner door seal strip installed around the door opening flange on the side panels or an outer door seal strip installed around the door. Some models have both seal strips, while others use only one, depending on performance requirements or cost targets. 2. Sealing of the window area: This is mainly accomplished by the glass guide channel seal strip on the window frame and the inner and outer window sill seal strips. These also ensure the smooth up and down movement of the window glass. Typically, the glass guide channel seal strip is the most demanding and structurally complex part of the entire vehicle sealing system.

10

0

Share

What Are the Reasons for the Car Malfunction Indicator Light to Illuminate?

The engine malfunction indicator light may illuminate due to poor fuel quality. It is likely that most car owners have experienced this situation—shortly after refueling, the engine malfunction light appears on the dashboard. This is mostly caused by filling up with low-quality gasoline at non-standard gas stations, leading to incomplete combustion of the air-fuel mixture during engine operation and triggering the engine malfunction light. While this does not affect driving safety, it may cause some degree of damage to the engine. Additionally, the uneven quality of fuel available in the market and congested urban traffic can easily lead to carbon buildup on the car's spark plugs. Carbon deposits on the spark plugs can cause poor engine performance, resulting in issues such as difficulty starting, unstable idle speed, poor acceleration, backfiring during rapid acceleration, excessive exhaust emissions, and increased fuel consumption. Furthermore, engine misfire can lead to increased fuel consumption, black smoke emissions, weak acceleration, severe shaking, and possibly louder engine noise. It may also cause the vehicle to stall frequently. The primary causes of engine misfire stem from the ignition system and fuel supply system. When the engine malfunction light illuminates, it does not necessarily mean the engine has stopped working, but it is advisable to drive to a repair shop promptly for inspection and maintenance. Upon noticing the engine malfunction light, first check the coolant temperature gauge and the oil pressure warning light. If these indicators show no warning, the vehicle can still be driven, but it is crucial to control the speed and proceed to a repair shop for inspection as soon as possible. If the coolant temperature is too high or the oil pressure warning light comes on, accompanied by noticeable vehicle malfunctions, you should pull over immediately and call the repair shop for assistance.

14

3

Share

Can you overtake by borrowing the lane with a single yellow line?

Overtaking by borrowing the lane with a single yellow line is not allowed. Driving outside the designated lane will result in a fine and a deduction of 3 points. If there is no left-turn signal or no left-turn prohibition sign, you can make a left or right turn, but you must yield to straight-moving vehicles and pedestrians. More related information is as follows: Single yellow line and double yellow line: A single yellow line is a warning not to cross the line, overtake in the opposite direction, or make a left turn. A double yellow line is a warning that vehicles must not cross the line, overtake in the opposite direction, or make a left turn. Additional information: If there is a turn signal, you must drive according to the turn signal; otherwise, it will be considered as running a red light, which is a serious traffic violation. However, if there is no prohibition of right turns, you can make a right turn under any signal.

14

4

Share

Why Can't the BYD Song Gear Shift Engage?

Here are the detailed reasons why the BYD Song gear shift may not engage: 1. Loose Shift Fork: The screws fixing the shift fork may have loosened, causing incomplete gear engagement. Severe wear on the shift fork can prevent it from moving the gear, leading to difficult shifting. In this case, repair or replace the damaged shift fork and tighten the fixing screws. 2. Worn Positioning Groove: Irregular steps on the surface may sometimes jam during gear shifting, preventing the positioning pin from sliding out of the groove, resulting in difficulty or failure to engage gears. This should be repaired. 3. Deformed Shift Shaft: A deformed shift shaft can make it difficult for the sliding gear to move. Repair or replace the shift shaft in this situation. 4. Incomplete Clutch Disengagement: If the gears inside the transmission continue to rotate during shifting, it can make shifting difficult. Adjust the clutch in this case.

11

3

Share

Is it necessary to clean carbon deposits at a 4S shop?

4S shop cleaning carbon deposits is necessary. The following is a detailed introduction about automobile 4S shops: 1. Overview: The full name of a 4S shop is Automobile Sales Service 4S shop (Automobile-Sales-Servicshop-4S), which is a car sales enterprise integrating four functions: vehicle sales (Sale), spare parts (Sparepart), after-sales service (Service), and information feedback (Survey). 2. Features: Automobile 4S franchise stores are invested and constructed by dealers and built according to the standards specified by automobile manufacturers. 4S shops and automobile manufacturers jointly form an automobile brand alliance, representing the brand culture, reflecting brand value, maintaining brand loyalty, and establishing the brand awareness and reputation of the automobile manufacturer.

16

4

Share

Should the reversed tire be reinstalled correctly?

What is the detailed explanation of the button icons for the 2020 Highlander?

What is the reason for water ingress in Volkswagen Lavida on rainy days?

What Are the Reasons for the Car Malfunction Indicator Light to Illuminate?

Can you overtake by borrowing the lane with a single yellow line?

Why Can't the BYD Song Gear Shift Engage?

Is it necessary to clean carbon deposits at a 4S shop?

Will one-way streets always be monitored?

How Many Years of Inspection Exemption for New Cars?

How to Remove the Sun Visor of a Honda Accord?

What Are the Symptoms of a Faulty Trunk Lock Mechanism?