Should the brake line of Baojun 730 be replaced if it's damaged?

Is it acceptable to increase the standard tire pressure from 2.3 to 2.5?

Yes. According to the provisions and requirements of the international GBT2978-2008 standard, the tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. In winter, the tire pressure should be based on the standard tire pressure of the vehicle, with an appropriate increase of about 0.2bar. In summer, the lower limit of the standard tire pressure for vehicle tires is generally sufficient. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1bar lower than the standard to prevent tire blowouts due to high temperatures. There are three commonly used methods for tire pressure monitoring: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and the tire pressure data for each tire is then displayed. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the purpose of monitoring tire pressure is achieved. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of the two systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a four-wheel indirect system is also equipped. Compared to using only direct systems, this hybrid system can reduce costs and overcome the defect of indirect systems being unable to detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires as direct systems do.

2

1

Share

What does the O/D gear mean?

The O/D gear stands for Overdrive, which is the abbreviation of OVERDRIVE in English, representing the overdrive gear. It is typically used in automatic transmission vehicles without manual mode. The usage scenarios of the O/D gear are as follows: When overtaking quickly on highways: When the vehicle speed reaches 80km/h, the transmission will automatically shift to the 4th gear, especially in 4AT models, meaning the vehicle is in overdrive. If you want to overtake at this time, press the "O/D" button, and the vehicle will automatically switch to the 3rd gear, increasing the engine speed and torque, allowing for quick overtaking by pressing the accelerator. Low-speed driving in congested areas: In crowded areas, pressing the "O/D" button prevents the transmission from shifting to the 4th gear, reducing unnecessary shifts of the solenoid valve and making it easier to accelerate after downshifting. When descending long slopes: Pressing the O/D button during long descents keeps the gear between the 3rd gear, utilizing engine braking to control speed and reduce brake usage. Other gear positions are as follows: P gear: Parking means "parking." It is the parking gear used when stopping. After reaching the destination or for long-term parking, shift the lever into this position. Note: The vehicle must be completely stopped before shifting into P gear. Shifting into P gear before the vehicle is fully stopped can damage the automatic transmission. In P gear, the wheels are mechanically locked to prevent movement, especially useful when parking on slopes. Additionally, during short stops (e.g., at traffic lights), avoid shifting into P gear to prevent severe transmission damage in case of a rear-end collision. R gear: Reverse means "reverse" and is used for backing up. To reverse, press the safety button on the lever and shift into R gear. Ensure the vehicle is completely stopped before shifting to avoid damaging the transmission. N gear: Neutral means "neutral" and is also called the neutral gear. It can be used when waiting at traffic lights while pressing the brake. For longer waits, engage the handbrake and release the brake pedal. A common misconception is that shifting into N gear while coasting downhill or at high speeds saves fuel, but this is incorrect and can damage the transmission. D gear: Drive means "drive" and is the forward gear. Shifting into this gear and pressing the accelerator allows the vehicle to move. The transmission automatically shifts based on speed and throttle input. At traffic lights, you can stay in D gear while pressing the brake. For short waits, this is fine, but prolonged use can overheat the transmission fluid. S gear: Sport means "sport" and is the sport mode. In this gear, the transmission delays shifting to provide more power, typically used for overtaking. L gear: Low means "low" and is the low-speed forward gear. In this gear, the transmission stays in a low gear (equivalent to manual 1st gear) and does not shift automatically. It is used for climbing or descending steep slopes. The low gear provides high torque for climbing and engine braking for descending, reducing the need for constant braking. M gear: Manual means "manual" and switches to manual mode, allowing manual gear shifts like in manual transmission vehicles.

11

2

Share

What are the penalties for drunk driving a motor vehicle?

According to Article 91 of the Road Traffic Safety Law, administrative penalties for drunk driving include three scenarios: For drunk driving a non-commercial motor vehicle, the traffic management department of the public security authority will detain the driver until sober, revoke the motor vehicle driving license, and pursue criminal liability according to law; the driver cannot re-obtain a motor vehicle driving license within five years. For drunk driving a commercial motor vehicle, the traffic management department of the public security authority will detain the driver until sober, revoke the motor vehicle driving license, and pursue criminal liability according to law; the driver cannot re-obtain a motor vehicle driving license within ten years, and after re-obtaining the license, cannot drive commercial motor vehicles. If drunk driving a motor vehicle results in a major traffic accident constituting a crime, criminal liability will be pursued according to law, and the traffic management department of the public security authority will revoke the motor vehicle driving license, with the driver permanently barred from re-obtaining it. According to Article 133 of the Criminal Law, drunk driving a motor vehicle constitutes the crime of dangerous driving, punishable by criminal penalties including detention and fines. Judgment standards for drunk driving and alcohol-impaired driving: Alcohol-impaired driving standard: When the blood alcohol content of a vehicle driver is greater than or equal to 20mg/100mL but less than 80mg/100mL. Calculations show that consuming 350mL (about one small bottle) of beer or 20ml of liquor typically raises blood alcohol concentration to 0.02 (20mg/100ML), meeting the penalty threshold for alcohol-impaired driving. Under the new traffic law: Driving a motor vehicle under the influence of alcohol results in temporary suspension of the motor vehicle driving license for one to three months, a fine, and 6 penalty points. Penalties are harsher for driving commercial vehicles under the influence: temporary suspension of the motor vehicle driving license for three months, a fine, and 12 penalty points. Drunk driving standard: When the blood alcohol content of a vehicle driver is greater than or equal to 80mg/100mL. According to national standards, drivers with blood alcohol levels of 20-80mg per 100mL are considered alcohol-impaired, while levels above 80mg are classified as drunk driving. Breathalyzer tests are not included in drunk driving assessments. For suspected drunk drivers, blood tests are required as per criminal evidence standards. Alcohol monitoring device data during traffic stops are preliminary tools for police to assess drunk driving, with final conclusions based on blood alcohol comparisons. The following behaviors disqualify individuals from obtaining a driving license: Committing a major traffic accident under the influence of alcohol or drunk driving, constituting a crime; drunk driving or alcohol-impaired driving of commercial vehicles with license revoked for less than five years; drunk driving of commercial vehicles with license revoked for less than ten years. Additionally, unlicensed individuals committing these offenses face the same restrictions as licensed drivers, barred from obtaining a license within specified periods. Hazards of drunk driving: Reduced tactile sensitivity and heightened excitement Alcohol impairs hand and foot sensitivity, making it hard to control the throttle, brakes, and steering, while inducing overconfidence. Impaired judgment and operation Alcohol delays reactions to light and sound stimuli and reflexes, disrupting coordination between sensory and motor organs like eyes, hands, and feet, leading to misjudgment of distance and speed. Blurred vision Alcohol temporarily impairs vision, stability, and color discrimination, hindering the ability to recognize and interpret traffic signals, signs, and markings. It also narrows the visual field, making hazards hard to spot and increasing accident risks. Abnormal mentality Alcohol leads drivers to overestimate their abilities, with significantly dulled judgment, analysis, and operation skills, increasing accident risks. Increased fatigue Alcohol causes drowsiness in 80% of people, leading to irregular driving and poor spatial vision, typical of fatigue-induced accidents.

1

3

Share

Why is the A4 engine warning light on?

Sensor issues, car maintenance problems, fuel quality issues, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust problems, and anti-theft system malfunctions are the main reasons for the engine warning light to illuminate. Additionally, when starting the car, the vehicle performs a self-check on the engine system. Normally, the engine warning light will turn off after the self-check is completed. If it remains on for an extended period, it is advisable to seek professional help at a repair station to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor problems: Sensors include coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, leading to the illumination of the engine warning light. In such cases, it is important to visit a repair center promptly for professional diagnosis and to eliminate safety risks. Maintenance issues: Poor engine maintenance is the most common cause of the engine warning light. Vehicles have specific maintenance schedules. If maintenance is not performed on time, combined with poor driving habits, it can increase the burden on the engine, eventually triggering the engine warning light to alert the owner of a fault. Fuel quality issues: This refers to both fuel and engine oil. The fuel used in cars typically has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend which fuel grade and oil type to use. If the owner does not adhere to these recommendations, long-term use can cause engine wear, leading to the illumination of the warning light. It is essential to use the correct fuel grade and suitable engine oil as specified for the vehicle. Poor combustion of the air-fuel mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can all lead to poor combustion of the air-fuel mixture in the engine. This can result in engine carbon buildup or knocking, which the oxygen sensor will detect and report to the ECU, triggering the warning light as an alert. Intake problems: The engine requires air for combustion, making the air filter crucial. If the air filter is dirty or not cleaned regularly, it can affect the engine's air intake, potentially causing blockages over time. In severe cases, this can lead to the engine warning light illuminating. Turbocharging issues: Problems with the intake turbocharging pipes or the turbocharger can also cause the engine warning light to turn on. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust problems: These include the rear oxygen sensor, catalytic converter, exhaust camshaft, and bearings. The most frequent cause is a faulty catalytic converter, which can result from using leaded gasoline, lead or silicon-based oil additives, physical damage to the catalytic converter, or fuel system malfunctions. Anti-theft system: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine control unit, the anti-theft system can prevent the engine from operating normally, also triggering the engine warning light. There are two scenarios when the engine warning light is on: a yellow light indicates a warning, meaning certain system parameters may be outside the set range. The car can still be driven, but some functions may be limited. A red engine warning light signifies a prohibition, meaning the car must be stopped immediately, the engine turned off, and further driving avoided until the fault is diagnosed. Solutions for the engine warning light: If the engine warning light is on and the car cannot start, this may be due to a faulty fuel pump or ignition components. It is recommended to call for assistance immediately. If the engine warning light is on and the car can still be driven but exhibits severe shaking or loss of power, pull over and call for roadside assistance. If the engine warning light is on but there are no noticeable driving issues, this may be due to a faulty sensor. In this case, driving can continue temporarily, but it is best to drive at low to moderate speeds and visit a repair shop to address the issue.

12

3

Share

How to Replace the Wiper Blades on a Classic Ford Focus?

Lift the wiper blades of the Classic Ford Focus vehicle to keep them steady. Locate the plastic tab on the wiper blade of the Classic Ford Focus vehicle, press the tab, and remove the old wiper blade. Insert and secure the new wiper blade for the Classic Ford Focus vehicle. Return the wiper to its position and repeat the same process for the second one. Ensure the metal clip securing the rubber strip is tightly fastened; otherwise, the rubber strip may shift during use, affecting performance.

8

2

Share

Can You Still Drive with a Faulty Thermostat?

You can still drive with a faulty thermostat. The functions of a thermostat are: 1. It remains closed when the engine temperature has not reached the normal operating temperature, allowing the engine coolant to circulate within the engine via the water pump in a small loop, which helps the engine warm up quickly; 2. Once the temperature exceeds the normal range, it opens to enable the coolant to flow through the entire radiator circuit in a large loop, achieving rapid heat dissipation. A thermostat is an automatic temperature-regulating device equipped with a temperature-sensing component. It automatically adjusts the amount of coolant entering the radiator based on the coolant temperature, altering the coolant's circulation range to regulate the cooling system's heat dissipation capacity.

13

1

Share

Should the brake line of Baojun 730 be replaced if it's damaged?

Is it acceptable to increase the standard tire pressure from 2.3 to 2.5?

What does the O/D gear mean?

What are the penalties for drunk driving a motor vehicle?

Why is the A4 engine warning light on?

How to Replace the Wiper Blades on a Classic Ford Focus?

Can You Still Drive with a Faulty Thermostat?

What is the repair method for scratched paint on the rearview mirror?

Which car has a wild horse as its logo?

What is the actual fuel consumption of the Wrangler?

Where are the brakes on a motorcycle?