Should the Arrizo 5 use 5w30 or 5w40 engine oil?

Is the Lynk & Co 02 a three-cylinder engine?

The Lynk & Co 02 does not feature a three-cylinder engine across all models; only the 1.5T variant comes with a three-cylinder engine. The Lynk & Co 02 utilizes a total of three engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. Below are the specifications for the Lynk & Co 02: 1. The low-power version 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 245 Nm, with peak torque available from 1,450 to 4,000 rpm and maximum power at 5,000 rpm. 2. The high-power version 1.5-liter turbocharged engine produces 180 horsepower and a maximum torque of 265 Nm, with peak torque available from 1,500 to 4,000 rpm and maximum power at 5,500 rpm. 3. The 2.0-liter turbocharged engine generates 190 horsepower and a maximum torque of 300 Nm, with peak torque available from 1,400 to 4,000 rpm and maximum power at 4,700 rpm.

15

2

Share

How many seconds does it take for the BMW 525 to accelerate?

The domestically produced BMW 525 takes 8.3 seconds to accelerate in actual tests, while the imported version takes 7.4 seconds. The BMW 525 is positioned as a mid-to-large-sized sedan, with dimensions of 5087mm in length, 1868mm in width, and 1500mm in height, and a wheelbase of 3108mm. It features a front-engine, front-wheel-drive layout. Below are some key details about the BMW 525: 1. Safety features: Front and side airbags for the driver and front passenger, front and rear head airbags, seatbelt reminder, passive pedestrian protection, rear child seat anchors, tire pressure monitoring, ABS, brake force distribution, brake assist, traction control, electronic stability control, and fatigue alert. 2. Assist features: Front and rear parking sensors, rearview camera, cruise control, drive mode selection, engine start-stop technology, auto hold, and hill start assist. 3. Powertrain: Equipped with a 2.0T engine producing a maximum output of 135 kW and a peak torque of 290 N·m, with a top speed of 230 km/h. The official combined fuel consumption is 6.6L/100km as per the Ministry of Industry and Information Technology.

6

0

Share

Where is the trunk switch of the new Regal?

The new Regal has four trunk opening switches, which are: 1. On the left front door, look up from the bottom, there is a trunk opening button on the interior panel. 2. The central door lock on the left front door is also the trunk switch. 3. Pull down the decorative panel behind the center armrest of the rear seat, there is an emergency exit handle inside, and pulling it hard can also open the trunk. 4. Press and hold the trunk unlock button on the key, and the trunk will automatically open after a few seconds. Precautions are as follows: 1. Make sure that the latch is properly engaged after closing the trunk lid. Even if the door lock is locked but not properly engaged, it may cause the trunk to suddenly open, which is a potential safety hazard during driving. 2. Do not drive with the trunk lid ajar or open, otherwise exhaust gas may enter the interior of the car, posing a risk of poisoning.

10

5

Share

How often should Ford Mondeo tires be replaced?

Ford Mondeo tires should be replaced every 60,000 to 100,000 kilometers. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during driving. Therefore, they must have relatively high load-bearing performance, traction performance, and cushioning performance. The following points should be noted when replacing car tires: 1. Choose tires with the same specifications as the original ones installed on the car. 2. Replace two tires at the same time, and rebalance each wheel after replacement to ensure uniform mass distribution across all parts. 3. After replacing the tires, the aging cycles of the new tires and the valve stems may differ. Valve stems may develop issues that are not easily noticeable, so it is recommended to replace the valve stems when replacing the tires. 4. If using the original tires provided with the car, follow the manufacturer's installation requirements. If using non-original tires, the side with the production date should generally face outward.

7

3

Share

How to remove the bumper of a LANGDONG?

Steps to remove the bumper of a LANGDONG: 1. Remove the clips on the left and right inner liners and pry open the liners. 2. There is a screw on the inner side of each bumper corner; gently pry it open. 3. Open the hood and remove the clips on top of the bumper. 4. Finally, remove the clips and screws at the bottom. Below is some relevant information about car bumpers: A car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle. Both the front and rear bumpers of a car are made of plastic, hence called plastic bumpers. Generally, a car's plastic bumper consists of three parts: the outer panel, the cushioning material, and the crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin sheets into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam.

10

4

Share

What is the reason why the Prado air conditioner cannot be turned off?

Prado air conditioner switch is turned off, the compressor will stop. If it does not stop, it may be due to relay adhesion or a problem with the switch controlling the compressor. To use the air conditioner in the Prado, the A/C button is required, which is the air conditioner switch DUAL button. This button is used to independently set the temperature for the driver's seat and the front passenger seat. Pressing this button can switch from independent mode to joint mode. The following is the Prado air conditioner usage guide: 1. Adjust the air conditioner temperature: The "+" and "-" adjustment keys are located on the left and right sides of the screen, and each press can increase or decrease the temperature by 0.5℃. 2. Seat heating: The two buttons in the lower left and lower right corners of the screen are the seat heating buttons, which control the temperature adjustment for the driver's cabin and the passenger seat respectively. 3. Temperature zone control: The "DUAL" button next to the A/C button in the air conditioner cooling mode is the button for temperature zone synchronization control. 4. Footwell temperature: In the button bar at the bottom of the screen, click the middle "···" button to open the multimedia settings options above, and then you can adjust the footwell temperature. 5. Warm air and hot air activation: Before heating with the air conditioner, turn off the A/C button. Heating is completed through the glass heating wire and the temperature of the coolant, without the need for the compressor to work.

1

2

Share

Should the Arrizo 5 use 5w30 or 5w40 engine oil?

Is the Lynk & Co 02 a three-cylinder engine?

How many seconds does it take for the BMW 525 to accelerate?

Where is the trunk switch of the new Regal?

How often should Ford Mondeo tires be replaced?

How to remove the bumper of a LANGDONG?

What is the reason why the Prado air conditioner cannot be turned off?

Which region does the license plate 'Hong' belong to?

Where is the oxygen sensor located on the old Jetta?

Does swapping rear tires to the front have any impact?

Do Paddle Shifters Accelerate by Upshifting or Downshifting?