Reasons why the front passenger door of Emgrand GL occasionally cannot be opened?

1 Answers
AlyssaRose
07/30/25 10:45am
Here are the reasons why the front passenger door of Emgrand GL cannot be opened: 1. The central door lock is activated: When the door cannot be opened, you can use the car key to unlock and then lock it again, repeating this twice. Locate the central lock button on the left front door trim panel in the main driver's compartment, press the unlock button, and then try opening the door again to see if it works. This is one of the reasons why the door cannot be opened. 2. The child lock is activated: When closing the door, always remember to check if the child lock is deactivated. If the door cannot be opened, use a flathead screwdriver to turn the child lock to the off position.
Was this review help?
10
5
Share
More Forum Discussions

What are the differences between the h6 and h6coupe?

The differences between the h6 and h6coupe lie in the engine power parameters and exterior design. Below are the detailed comparisons between the h6 and h6coupe: 1. Exterior: The Haval h6coupe appears much younger than the H6. The H6's design is more conservative, catering to the aesthetic preferences of the majority, while the H6coupe excels in creating a sportier look, living up to its 'coupe' title. The two models also differ significantly in interior design, with the H6 featuring higher-quality materials and a more sophisticated design compared to the H6c, incorporating current Great Wall's mainstream design elements. 2. Engine Power Parameters: The H6c is equipped with a 1.5T engine, delivering a maximum horsepower of 150 hp, a maximum power of 116 kW, and a maximum torque of 210 Nm. In contrast, the H6 boasts a 2.0T engine with a maximum horsepower of 194 hp, a maximum power of 145 kW, and a maximum torque of 315 Nm, showcasing a significant gap in engine performance.
3
3
Share

How to Reset the Maintenance Reminder for Octavia?

Here are the specific steps to reset the maintenance reminder for Octavia: 1. Turn off the ignition switch. (Turn off the engine) 2. Press and hold the "0.0/SET" (Reset/Set) button on the instrument panel. 3. Turn on the ignition switch while keeping the "0.0/SET" (Reset/Set) button pressed with your left hand. 4. Release the "0.0/SET" (Reset/Set) button when one of the following messages appears on the instrument panel display. 5. Press the "0.0/SET" (Reset/Set) button again to confirm. 6. Check if the maintenance light has been reset. If not, you must start over from the beginning.
2
1
Share

Which Department to Complain to About Car Quality Issues?

When encountering car quality issues, you can negotiate and resolve the matter with the seller; file a complaint with the car manufacturer for a solution; or lodge a complaint with the Consumer Association and relevant administrative departments. Below are the relevant details about complaints: 1. Filing a complaint with the Consumer Association and relevant administrative departments: When neither the 4S store nor the car manufacturer can effectively resolve the issue, or if the car is already out of warranty and repairs at the service center still fail to fix the problem, it is recommended that the car owner files a complaint with the Consumer Association and relevant administrative departments. After filing a complaint with the Consumer Association or relevant administrative departments, they will handle the case primarily through mediation based on the issues raised by the consumer. 2. Applying for arbitration or litigation: When neither the Consumer Association nor the relevant administrative departments can help resolve the issue, it is recommended that the car owner applies for arbitration or litigation. Arbitration is based on a dispute resolution agreement signed by both parties, where the consumer submits an arbitration application to the agreed arbitration committee; litigation refers to the consumer directly suing the vehicle's producer, seller, or service provider in a court with jurisdiction.
12
4
Share

What are the six starting mnemonics for Subject Three?

Subject Three starting mnemonics: First step (clutch), Second gear (first gear), Third turn (left signal), Fourth press (horn), Fifth release (handbrake), Sixth look (front, back, left, and right conditions), Seventh release and accelerate (release clutch, accelerate). More details are as follows: 1. Prepare to start in first gear, turn on the left signal before the car moves. 2. Sound the horn then release the handbrake, starting must be in semi-linked state. 3. Shift to second gear as soon as the car moves, slightly increase the throttle in second gear. 4. Turn off the signal then shift to third gear, further increase the throttle in third gear. 5. Increase speed and shift to fourth gear, quickly shift between fourth and fifth gears at high speed. 6. Clearly distinguish between two-foot clutch operations, and remember the standardized actions.
1
2
Share

How Long Can You Drive After the Audi A6 Brake Pad Warning Light Comes On?

Audi A6 brake warning light indicates that the brake pads have worn down to the manufacturer's preset wear limit. After the warning light comes on, there is usually 2~4mm of brake pad thickness remaining, which can theoretically last for about 1,000 kilometers. When the brake pads are completely worn out, metal-on-metal contact will occur, causing grooves on the brake discs and increasing safety hazards. Therefore, it is recommended to inspect and replace the brake pads as soon as possible after the warning light appears. Here are some braking techniques: 1. Emergency braking: Some vehicles are not equipped with ABS, so it is not advisable to apply full braking force at once. Instead, apply the brakes in two separate steps to prevent wheel lock-up, which can lead to skidding and loss of steering control. 2. Braking in rainy conditions: When driving on wet roads, avoid sudden braking or sharp turns of the steering wheel. After driving through water, it is best to gently apply the brakes twice to use inertia and friction to remove water from the brake discs, preventing brake failure during sudden braking.
15
2
Share

Can a Water-Damaged Car Key Still Be Used?

Water-damaged car keys can continue to be used after being disassembled and dried. Here are the relevant details: 1. Key: Most modern car keys are electronic keys, which are electronic devices. Therefore, do not use them directly after water exposure, as it may damage the internal circuits. You can disassemble the key and dry it with a hairdryer before reuse. 2. Precautions: Electronic keys contain batteries, which may cause a short circuit when exposed to water. Ensure the key is completely dry before attempting to unlock the car. Temporarily, you can use the mechanical key as a substitute. If the key still doesn't work, it's necessary to replace it with a new one promptly.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.