Quick Handling of Traffic Accidents?

1 Answers
BeauMarie
07/30/25 9:30am
Article 70 of the Road Traffic Safety Law stipulates that in the event of a traffic accident on the road, the driver of the vehicle shall immediately stop the vehicle and protect the scene; if there are casualties, the driver shall immediately rescue the injured and promptly report to the on-duty traffic police or the traffic management department of the public security organ. In the event of a traffic accident on the road that does not result in personal injury or death, and where the parties involved have no dispute over the facts and causes, they may immediately leave the scene, resume traffic, and negotiate compensation for damages on their own; if they do not leave the scene immediately, they shall promptly report to the on-duty traffic police or the traffic management department of the public security organ.
Was this review help?
4
2
Share
More Forum Discussions

Does the Sylphy have an ABS system?

The Sylphy is equipped with an ABS system. ABS stands for Anti-lock Braking System. Its function is to automatically control the braking force during vehicle braking, preventing the wheels from locking up and maintaining a state of rolling and sliding (with a slip ratio of around 20%), ensuring maximum traction between the wheels and the road. Classification of ABS: ABS is primarily classified based on channels. In ABS, the brake pipelines that can independently regulate braking pressure are referred to as control channels. ABS systems are categorized into four-channel, three-channel, two-channel, and one-channel configurations. One-channel ABS: Also known as single-channel ABS, it features a single brake pressure regulator in the rear wheel brake assembly and a wheel speed sensor installed on the rear axle differential (some models may have one sensor per rear wheel). Two-channel ABS: This type of ABS struggles to balance directional stability, steering control, and braking efficiency, and is rarely used today. Three-channel ABS: It provides independent control for the two front wheels, while the two rear wheels are controlled together based on the low-select principle (i.e., both wheels are controlled by one channel to ensure the wheel with less traction does not lock up), also known as hybrid control. Four-channel ABS: Equipped with four wheel speed sensors, it includes a brake pressure regulator in each of the four wheel brake lines for independent control, forming a four-channel control system.
1
5
Share

How often should the transmission fluid in a sedan be changed?

Sedan transmission fluid replacement cycle: 1. The replacement cycle of transmission fluid is based on mileage or usage time. If the vehicle manual clearly specifies these two indicators, the one that comes first should be followed; 2. If the vehicle manual does not clearly indicate the oil change interval, it is generally recommended to replace the transmission fluid every 50,000 to 80,000 kilometers. The following are the hazards of not changing the transmission fluid for a long time: 1. It can cause abnormal wear and tear of the transmission and deterioration of the fluid. 2. It can lead to aging and degradation of the transmission fluid, which not only increases fuel consumption but also shortens the service life of the transmission.
20
1
Share

Is Wheel Balancing Necessary After Tire Repair?

Wheel balancing is necessary after tire repair for the following reasons: 1. During tire repair, the tire needs to be removed from the rim, repaired, and then reinstalled, which disrupts the overall weight distribution. Therefore, wheel balancing is required to correct this. 2. Wheel balancing should also be performed after replacing tires or rims, repairing tires, or when the wheel has suffered significant impact. The procedure for wheel balancing is as follows: 1. Remove the tire from the vehicle and secure it on the balancing machine. Input the required values as prompted by the machine, and rotate the tire to read the imbalance value. 2. Add balancing weights to correct the imbalance, then reinstall the corrected tire onto the vehicle. The wheel balancing process is now complete.
14
2
Share

What do the letter markings on an automatic transmission car mean?

There are a total of 5 letter markings on an automatic transmission, with their specific meanings as follows: 1. P (parking) gear: Represents the parking gear. When parking, shift the gear lever to the P position to lock the output shaft with the transmission's parking brake device, then tighten the hand brake to prevent the car from moving. 2. R (reverse) gear: Represents the reverse gear. Use this gear when reversing the car. 3. D (drive) gear: Represents the drive gear. Used for normal driving, simply place the gear lever in the D position, and the car will automatically adjust the gears while driving. 4. L (low) gear: Represents the low gear. Equivalent to 2nd gear, often used when going up or down hills. 5. N (neutral) gear: Represents the neutral gear. Used when starting the car or towing.
19
0
Share

Can Car Wheels Be Replaced Randomly?

Car wheels cannot be replaced randomly. Although tires may seem simple in structure, changing their size can affect many vehicle parameters, as the entire car relies on the wheels for contact with the road surface. Replacing car wheels has the following three disadvantages: 1. Increasing the wheel size reduces the car's mileage: Mileage is calculated based on the number of wheel rotations, and changing it can affect maintenance cycle judgments. 2. Relevant regulations on car modifications: Altering the registered appearance and technical data of a motor vehicle is not permitted for modification registration, unless otherwise specified by national mandatory standards. 3. Safety concerns: It may lead to accidents. If inferior-quality wheels are installed, they may fracture during high-speed driving, resulting in tragic accidents.
8
3
Share

What is the horsepower of the Hongqi HS7?

The Hongqi HS7 is equipped with a 3.0-liter supercharged engine across the entire lineup, delivering a maximum horsepower of 337, which is more than sufficient for daily use. Here are some details about the Hongqi HS7: 1. Exterior: The Hongqi HS7 is a mid-to-large-size SUV produced by FAW Hongqi, with body dimensions of 5035*1989*1778mm. 2. Transmission: The Hongqi HS7 uses an 8-speed automatic transmission from Aisin across all models. 3. Drivetrain: The Hongqi HS7 features a four-wheel drive system.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.