Is Wuling Hongguang a domestic car?

1 Answers
DelJayce
07/30/25 12:55am
Wuling Hongguang is a domestic car. It is a microvan under the SAIC-GM-Wuling joint venture, with exterior dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, and a wheelbase of 2720mm. The body structure is that of a passenger van. Taking the Wuling Hongguang 2019 1.5LS basic model National VI LAR as an example: its exterior dimensions are 4420mm in length, 1685mm in width, and 1755mm in height, with a wheelbase of 2720mm, a fuel tank capacity of 50 liters, and a curb weight of 1230 kilograms. It is equipped with a 1.5L 100 horsepower L4 naturally aspirated engine and a 6-speed manual transmission.
Was this review help?
18
4
Share
More Forum Discussions

What is the normal temperature range for an electric vehicle battery?

Electric vehicle batteries operate optimally within a temperature range of 0-40°C. Here are some key points about electric vehicle batteries: 1. Optimal battery temperature: Since the ideal temperature for battery cells is 0-40°C, temperatures that are too high or too low can affect cell activity and cause irreversible damage, potentially impacting battery lifespan. When charging an electric vehicle, if the battery temperature is below 0°C, it needs to be preheated before charging can begin, which prolongs the charging process and is not conducive to battery maintenance. 2. Battery usage precautions: During vehicle charging, as the battery pack temperature rises, significant temperature differences can trigger chemical reactions in the active materials on the positive and negative plates, thereby reducing battery life. Conversely, when battery temperatures are too low, the battery's storage capacity decreases, making it prone to over-discharge and consequently shortening battery lifespan.
10
0
Share

How to Determine Airbag Malfunction?

Here are the specific details for determining airbag malfunction: 1. Airbag warning light illuminates: If the airbag malfunction warning light turns on 6 seconds after turning the ignition switch or remains lit after turning off the ignition, there is a fault in the airbag warning light circuit. It should be inspected at a repair shop as soon as possible. 2. Insufficient battery voltage: Low battery voltage can cause the airbag malfunction warning light to illuminate. Once the battery voltage returns to normal, the airbag malfunction warning light will automatically turn off. In such cases, simply charging the battery is sufficient.
11
0
Share

What is the fuel tank capacity of the Sylphy?

Sylphy 1.2L models have a fuel tank capacity of 41 liters, the Classic 1.6L models have a fuel tank capacity of 50 liters, and the 1.6L-CVT version models have a fuel tank capacity of 47 liters. These data are officially released. The Sylphy uses 92-octane fuel. The 1.2L models have a fuel consumption of 3.9L per 100 kilometers, allowing a range of 1051km on a full tank. The Classic 1.6L models have a fuel consumption of 5.2-6.1L per 100 kilometers, with a range of 819-961km on a full tank. The 1.6L-CVT version models have a fuel consumption of 4.9-5.3L per 100 kilometers, providing a range of 886-959km on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge in the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are 2 segments left to avoid running out of fuel midway. In actual refueling, the amount of fuel added may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, with additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
13
0
Share

Why Does a Diesel Vehicle Emit Black Smoke When Accelerating Suddenly?

Diesel vehicles emitting black smoke is generally due to a clogged air filter. In addition, there are several other possible causes: 1. Overly rich air-fuel mixture: Excessive engine oil in the fuel. Poor sealing of piston rings or crankshaft oil seals. Water in the fuel. Faulty spark plugs. Dirty air filter. To diagnose and check for an overly rich air-fuel mixture, focus on inspecting the carburetor and air filter. 2. Excessive wear or breakage in a four-stroke engine, or too much oil in the crankcase: This can cause oil to enter the combustion chamber, leading to excessive oil in the mixture. If the crankshaft oil seal in a two-stroke engine is damaged, transmission oil can also enter the crankcase and mix with the air-fuel mixture, entering the combustion chamber. 3. Water contamination in the fuel can occur for two reasons: First, the fuel in the tank may already contain water. In this case, clean the fuel tank and replace the fuel. Second, a damaged cylinder head gasket in a water-cooled engine can allow coolant to enter the cylinder. If the coolant level drops rapidly without any visible leaks and the exhaust emits slightly white smoke, the cylinder head gasket should be replaced. 4. Incomplete combustion of the oil in the air-fuel mixture, leading to black smoke: In two-stroke engines with separate lubrication systems, an improperly adjusted oil pump supplying too much oil can also cause this issue. The oil pump should be inspected and adjusted according to specifications to ensure proportional lubrication at different throttle openings. 5. High fuel consumption and reduced power in diesel engines: This can also lead to significant carbon buildup on pistons, piston rings, and valves.
18
2
Share

What are the requirements for upgrading from C1 to B1 driver's license?

The requirements for upgrading from C1 to B1 driver's license are as follows: You must have held a C1 driver's license for more than three years, be between 21 and 50 years old, and have no record of being deducted the full 12 points in the current scoring cycle and the most recent scoring cycle before applying for the B1 license. Below is relevant information about upgrading a driver's license: 1. Upgrade matters: To upgrade a driver's license, you must have a local household registration where you intend to upgrade, and the issuing authority of your driver's license must also be local. If you do not have a local household registration and local driver's license relationship, the upgrade will not be processed, and you must transfer the relationship. All types of driver's licenses require the completion of the probationary period before they can be upgraded. 2. Scoring cycle: After adding a new permitted driving category and obtaining a new driver's license, the validity period of the driver's license will not be recalculated. Additionally, the scoring cycle always starts from the initial issuance date of the original driver's license. It is important to note that during the probationary period after the upgrade, if the driver's license has a record of accumulating 12 points, the probationary driving qualification for the upgraded category will be revoked.
2
5
Share

What to Do If Your Illegally Parked Car Gets Scratched?

Responsibility is entirely borne by the illegally parked vehicle owner for the following reasons: 1. Basis for Traffic Police Judgment: In the event of a vehicle scratching incident where both parties dispute responsibility, traffic police should determine the accident liability based on whether each party has committed any violations and the extent to which these violations contributed to the accident. 2. According to Regulations: Article 46 of the "Road Traffic Accident Handling Procedures" stipulates that the traffic management department of the public security organ shall determine the responsibility of the parties involved based on the role of their actions in causing the road traffic accident and the severity of their faults. (1) If a road traffic accident is caused by the fault of one party, that party shall bear full responsibility; (2) If a road traffic accident is caused by the faults of two or more parties, the parties shall bear primary, equal, or secondary responsibility respectively, based on the role of their actions in causing the accident and the severity of their faults; (3) If no party is at fault for causing the road traffic accident, it is considered a traffic accident with no fault, and no party bears responsibility. If one party intentionally causes a road traffic accident, the other party bears no responsibility. Provincial public security organs may formulate specific rules or standards for determining road traffic accident responsibility in accordance with relevant laws and regulations.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.