···
Log in / Register

Is there a fee for the Subject 2 driving test?

4 Answers
McCameron
07/29/25 10:21am

No payment is required. The first attempt at the Subject 2 driving test does not require an additional fee, as the tuition paid when enrolling in the driving school already covers all costs. However, if you fail the Subject 2 test and need to retake it, the retake fee varies by region. Below is more relevant information: Notes for the Subject 2 test: 1. Steering wheel control: If the car is not aligned during reverse parking, check the rearview mirror and steer slightly toward the wider side, but avoid large adjustments—make minor corrections and quickly straighten the wheel. When approaching the slope for the hill start, watch the right rearview mirror; if you're about to touch the line, steer slightly to the left and then quickly straighten. 2. Seat adjustment: Always adjust the seat first when getting into the car! Since Subject 2 requires precise reference points, the seat position and backrest angle set during the first adjustment must remain consistent until the test ends. Seating posture is also crucial—sit upright and maintain the same head-tilt angle during both practice and the actual test. 3. Rearview mirrors: After adjusting the seat, proceed to adjust the rearview mirrors to the correct angles. The rearview mirrors play a significant role in reverse parking, parallel parking, hill starts, and curve driving. Skillful use of the mirrors can help avoid many mistakes. 4. Clutch control: Mastering the clutch is key to passing Subject 2. Many people stall the car at the start, ruining their test. Maintain a slow and steady speed, wear soft and comfortable shoes, and be mindful of how much you release the clutch. Once you find a suitable speed, keep your left foot steady—especially when starting, lift the clutch slowly and avoid releasing it abruptly.

Was this review help?
9
5
Share
LeJulia
08/13/25 2:03pm

I just passed my Subject 2 driving test recently and can share some insights about the costs. When I first signed up for driving lessons, the driving school mentioned that the tuition fee covered the first exam attempt, so normally there's no additional payment required for the test. However, if you fail, you'll need to pay for the retake fee yourself, which varies by region—mine costs 180 RMB per retake. Before the exam, I also paid an extra 200 RMB for a mock test to familiarize myself with the test site, which was a separate expense. I recommend clarifying all cost details when signing up for driving lessons and keeping the receipts. Also, remember to bring your ID card and appointment confirmation on the test day, and carefully check the equipment on-site to avoid minor issues affecting your performance during the exam.

Was this review help?
2
2
Share
Expand All
LaEmery
10/07/25 4:30am

The fee for Subject 2 test is usually included in the overall driving test package, so first-time examinees generally don't need to pay extra. However, retake fees vary significantly across regions - some cities charge 150 yuan while others over 200 yuan. Note that pre-test venue familiarization training typically requires separate payment collected directly by the test center. Some driving schools may additionally charge fuel fees for retraining, so it's advisable to clarify all secondary costs in the contract. Also, if the retake interval is too long, a new physical examination might be required, incurring additional expenses. Solid practice and proper mindset adjustment during training can help avoid these extra costs.

Was this review help?
8
3
Share
Expand All
KyleDella
11/20/25 5:53am

The initial driving test fee already covers the cost of the first attempt at Subject 2. However, if you fail the test, you'll need to pay a retake fee of 170 yuan (local standard). Familiarizing yourself with the test site beforehand also incurs a fee, payable to the venue administrator. It's advisable to clarify the retake limit and fee details in advance, preferably noted in the contract. Additional practice sessions during retakes may incur fuel costs, but you can negotiate with the instructor about coverage. Remember to bring your ID card and appointment confirmation to the test site to avoid a wasted trip.

Was this review help?
13
1
Share
Expand All
More Forum Discussions

Should the New Vision use 30 or 40 engine oil?

It is more appropriate to use 40 engine oil for the New Vision, but the specific choice depends on individual circumstances. Introduction to engine oil: Engine oil, also known as engine lubricant, serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, and shock absorption. Precautions for using engine oil: The selection of engine oil should be based on the requirements of the engine, ensuring compatibility. Multi-grade oil is recommended due to its advantages in fuel efficiency, longevity, and effectiveness, providing better protection for the engine. The oil level should be slightly below the mark on the dipstick, avoiding overfilling.
5
5
Share

What are the methods for reversing into the garage in Subject 2?

When reversing into the garage in Subject 2, turning the steering wheel early means returning it early to straighten the turning arc; turning the steering wheel late means returning it late to extend the turning arc. Below are methods for correcting deviations when reversing into the garage: 1. The green line represents the outer trajectory of the rear wheels when exiting the garage: observe carefully. 2. If the starting point of the outer rear wheel after turning the wheel fully to the right aligns exactly with the starting point of the green line (reference point): no correction is needed, and the reversing can be completed successfully in one attempt. 3. If the timing of turning the wheel fully to the right is 30cm later than the reference point: the outer rear wheel will follow the red line trajectory.
4
2
Share

What engine does the Odyssey Hybrid use?

The Odyssey Hybrid uses a 2.0L version of the engine, with the engine model being LFB11. The actual displacement of the LFB11 engine is 1993ml, with 4 cylinders arranged in an L formation. The LFB11 engine has four valves per cylinder, with a turbocharged intake method and a DOHC valve train. The LFB11 engine reaches its maximum power at 6200 rpm and its maximum torque at 3500 rpm. The safety features of the Odyssey Hybrid model include: front and side airbags for the driver and front passenger, seatbelt reminder, rear child seat interfaces, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, and vehicle stability control.
8
4
Share

How Much Horsepower Does the Encino Have?

Encino has 177 horsepower, powered by a 1.6-liter turbocharged engine. The Encino is a compact SUV under Hyundai, with dimensions of 4195mm in length, 1800mm in width, and 1575mm in height, and a wheelbase of 2600mm. The 1.6-liter turbocharged engine of the Encino delivers a maximum power of 130 kW and a maximum torque of 265 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. A dual-clutch transmission is a product developed based on manual transmissions, where one clutch controls the odd-numbered gears and the other controls the even-numbered gears.
10
0
Share

What model of brake fluid does Mercedes-Benz use?

Mercedes-Benz uses specialized brake fluid. Brake fluid: Brake fluid, also known as automotive brake fluid, is a liquid used in hydraulic braking systems to transmit pressure to stop the rotation of the wheels. It causes the pistons on the wheel cylinders to extend under the action of the sealing cups, utilizing the principle of leverage to act on the brake discs and pads, thereby achieving the braking effect. Characteristics of brake fluid: Brake fluid has a very low freezing point, ensuring good fluidity at low temperatures. It has an extremely high boiling point, preventing vapor lock at high temperatures. The quality of brake fluid changes very little, and it does not cause corrosion to metals or rubber.
8
1
Share

What are the causes of abnormal noise in the Camry steering gear?

Here are specific explanations regarding the causes of abnormal noise in a car's steering gear: From the perspective of steering gear principles: Many modern vehicles employ vacuum assistance, which only reduces the driver's steering effort without changing the actual load on the steering gear itself. Reducing wear: An effective method to minimize steering gear wear is to reduce the load and aging during its operation. It is advisable to develop the habit of turning the steering wheel only after the wheels start moving, thereby reducing friction resistance between the tires and the ground and alleviating excessive load on the steering gear and over-wear of the steering linkage system. Long-term stationary steering: This not only places a significant load on the steering gear but also accelerates tire surface wear and shortens tire lifespan.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.