Is the Wuling Hongguang S an exempted inspection vehicle?

Why does the Buick GL8 jerk during acceleration?

Buick GL8 transmission usually has abnormal noise and jerking sensation due to malfunctions. The possible causes of such malfunctions may be: 1. High engine idle speed; 2. Improper adjustment of the throttle cable or throttle position sensor, resulting in excessively high main oil circuit pressure; 3. Malfunction of the main oil circuit pressure regulating valve, causing excessively high main oil circuit pressure; 4. Slipping of shift execution components; 5. Oil pressure solenoid valve not working; 6. Computer malfunction. Below is a related introduction to the Buick GL8: 1. Appearance: The new-generation Buick GL8 has a more powerful appearance, featuring a waterfall-style grille paired with a winged chrome strip. The winged chrome strip runs through the double-layer combination full LED headlights, which are rich in layers. On the side of the body, the hidden D-pillar design creates a floating roof effect. Additionally, the designers paid rare attention to the roof, with a chrome strip running from the A-pillar to the D-pillar, highlighting the roof. 2. Dimensions: The new-generation Buick GL8 has dimensions of 5203/1878/1805mm (length/width/height) and a wheelbase of 3088mm. The length is slightly shorter, the body is taller, while the wheelbase remains unchanged. With the overall dimensions largely unchanged, the new-generation Buick GL8 achieves a significantly shorter front overhang through a more efficient front cabin layout. The increased rear overhang provides more trunk space and a better wheelbase ratio.

6

4

Share

How to Check Used Car Maintenance Records?

To verify the owner's identity as required, generally providing the ID number and vehicle identification number (VIN) will allow for checking. Car owners who have had repairs or maintenance done at independent repair shops know that many shops still provide paper maintenance receipts after servicing or maintenance is completed.

10

3

Share

How to Unclog a Blocked Engine Compartment Drain Hole?

The engine compartment is very close to the air conditioning intake. In the stuffy compartment, bacteria can easily breed, and in severe cases, water may flow into the car through the air conditioning intake, causing floor water accumulation. When cleaning the door drain holes, you can use hard objects such as iron wire to unclog them.

13

5

Share

Should the Car Air Conditioner Use Internal or External Circulation in Winter?

Car air conditioner internal circulation refers to the recirculation of air inside the vehicle, which allows the interior temperature to rise more quickly. However, this can lead to a decrease in air quality. External circulation, on the other hand, draws in fresh air from outside the vehicle, resulting in a slower rise in interior temperature. In winter, it is recommended to first use internal circulation to warm up the car and then switch to external circulation once the engine has warmed up. Here are some important considerations for using the car air conditioner: 1. Do not forget to press the A/C button. This button controls the air conditioning compressor. Many drivers are not familiar with it, but simply turning on the air conditioner without activating the compressor will not cool the car, even if the temperature is set to the lowest. 2. Pay attention to switching between internal and external circulation. If external circulation is left on continuously, hot air from outside will keep entering the car, forcing the air conditioner to work harder to maintain a cool temperature, leading to excessive energy consumption. Especially in areas with heavy air pollution, avoid using external circulation as it will bring polluted air into the car. On the other hand, continuous use of internal circulation, while energy-efficient, can reduce oxygen levels inside the car, causing drowsiness and affecting driver safety. Therefore, to balance energy efficiency and passenger health, make good use of the internal and external circulation switch. 3. Utilize the defogging mode of the air conditioner. During heavy rain, fog can form on the windshield, and many drivers may not know how to handle it except by wiping it with tissues. The defogging mode of the air conditioner can quickly resolve this issue by simply turning it on. When turning off the air conditioner, it is also important to note that after pressing the A/C button, the cold air from the air conditioner can condense moisture inside the car into water droplets, which may remain in the evaporator. If not addressed promptly, this can lead to bacterial growth and mold. To prevent this, remember to turn off the A/C button before shutting down the car, allowing the air conditioner to operate in ventilation mode to dry the moisture. 4. Replace the air filter regularly. The air filter is responsible for purifying outside air before it enters the car. If the filter is not replaced for a long time, it can lead to reduced cooling efficiency and unpleasant odors inside the car. Over time, the filter accumulates dust and debris, reducing airflow and cooling performance. Additionally, this can promote bacterial growth, resulting in foul-smelling air being blown into the car.

6

5

Share

What is the tire pressure for summer tires?

Summer tire pressure should be maintained between 2.4 to 2.5 bar. When inflating tires in summer, vehicle owners should use a pressure gauge to check the air pressure to prevent overinflation, which may cause tire blowouts. Hazards of excessive tire pressure: 1. Reduces tire friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates wear on the central tread pattern, shortening tire lifespan. Automotive tires are one of the key components of a vehicle, directly contacting the road surface and working with the suspension system to absorb shocks during driving, ensuring good ride comfort and smooth operation.

14

5

Share

What is the PTC function of Chery Ant?

Chery Ant's PTC function refers to the DC PTC heater in electric vehicles, which is a type of ceramic heater. Introduction to PTC: PTC stands for Positive Temperature Coefficient, indicating a large positive temperature coefficient, generally referring to semiconductor materials or components with significant positive temperature coefficients. Commonly mentioned PTC refers to Positive Temperature Coefficient Thermistors, abbreviated as PTC thermistors. Function of PTC: PPTC devices, or Polymer Positive Temperature Coefficient devices, can protect circuits when there is excessive current surge or high temperature.

1

0

Share

Is the Wuling Hongguang S an exempted inspection vehicle?

Why does the Buick GL8 jerk during acceleration?

How to Check Used Car Maintenance Records?

How to Unclog a Blocked Engine Compartment Drain Hole?

Should the Car Air Conditioner Use Internal or External Circulation in Winter?

What is the tire pressure for summer tires?

What is the PTC function of Chery Ant?

How to Deal with Insufficient Tire Pressure?

From which year did China National V vehicles start?

Will there be any consequences if I abandon my impounded car?

How to Solve Fogging on the Outside of Car Windows on Rainy Days?