Is the ticking sound in Suzuki UU engine normal?

What is the difference between direct injection and multi-point electronic injection?

The difference between direct injection and multi-point electronic injection lies in the fuel injection method: direct injection sprays fuel directly into the cylinder; multi-point electronic injection has injectors mounted on the intake manifold, where fuel and air begin to mix in the manifold before entering the cylinder. The engine generates power by burning fuel and air, and the fuel enters the cylinder through "injection." For electronic fuel injection engines, the key component is the fuel injector. If it becomes clogged, it can cause unstable idling, increased fuel consumption, poor acceleration, difficulty starting, excessive emissions, and in severe cases, completely block the injector, damaging the engine. If the injectors are installed on the intake pipe of each cylinder, meaning gasoline is injected from multiple locations (at least one injection point per cylinder), this is called multi-point electronic injection.

9

1

Share

Can You Still Drive with Brake System Failure?

You cannot continue driving with brake system failure. If the brake system malfunctions, it will affect driving safety, and you should promptly inspect and repair it. A car's brake system consists of a vacuum booster pump, master brake cylinder, wheel brake cylinder, brake pads, and brake discs. To ensure safe driving, improve the average driving speed, and enhance transportation productivity, dedicated braking mechanisms are installed on various vehicles. This series of specialized devices is collectively referred to as the brake system. The main functions of the brake system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a parked vehicle stationary.

20

3

Share

What's the difference between Continental MC5 and MC6?

Continental MC6 differs from MC5 mainly in dry handling, mileage, wet handling, wet braking performance, dry braking performance, etc. Here are the specific details: Introduction: The Continental MC6 is the successor model to the MC5, which comprehensively improves handling and durability while maintaining the original noise and comfort levels. Tires: Tires are the medium for transmitting forces between the vehicle and the road surface, transferring driving force, braking force, steering force, etc., thereby enabling the vehicle's driving, braking, and steering operations. Supporting vehicle load: The vehicle's load causes the tire to sink until the average pressure of the tire's contact area balances with the internal inflation pressure.

20

3

Share

Is it biennial inspection after 6-year exemption?

A 5-seater passenger vehicle that has reached 6 years of age requires biennial inspection under the new annual inspection regulations implemented on November 20, 2020. Below is an introduction to vehicle annual inspection: Vehicle annual inspection procedure refers to the mandatory process that every motor vehicle must undergo annually, equivalent to a physical examination for the vehicle. It helps promptly eliminate potential safety hazards and reduce traffic accidents, commonly known as vehicle inspection. Items to prepare for annual inspection: Before the annual inspection, check the validity date of the compulsory traffic insurance that includes the vehicle and vessel tax. If it has expired or will expire within three months after the inspection date, it is recommended to renew it in advance; bring the ID card of the vehicle owner or the agent; and the vehicle registration certificate.

13

4

Share

Is Front-Wheel Drive or Rear-Wheel Drive Faster in a Straight-Line Acceleration?

Rear-wheel drive cars are faster in straight-line acceleration. During the initial launch, rear-wheel drive vehicles provide better traction on the rear wheels, allowing the car to accelerate more quickly. When a car accelerates, the vehicle's center of gravity shifts backward, causing the front end to lift. For front-wheel drive cars, this reduces the traction on the drive wheels, making it harder to achieve higher speeds in a short time. In front-wheel drive cars, the front wheels are responsible for both steering and driving the car forward, while in rear-wheel drive cars, the front wheels handle steering and the rear wheels handle propulsion. Straight-line drag racers often modify the drive wheels with wider tires to improve traction and minimize wheel spin during launch.

4

Share

Should the Great Wall C30 use 5w30 or 40?

The Great Wall C30 can use 5w30 engine oil, as all models of the Great Wall C30 are equipped with a 1.5-liter naturally aspirated engine. There is no need to use 40 viscosity oil for a naturally aspirated engine. Engine oil is referred to as the blood of the engine; without it, the engine cannot operate. When the engine is running, the oil forms a thin film on the surfaces of various components inside the engine, preventing direct contact and friction between them. If the engine components come into direct contact and friction occurs, it can generate a large amount of heat instantly, potentially causing engine damage.

12

2

Share

Is the ticking sound in Suzuki UU engine normal?

What is the difference between direct injection and multi-point electronic injection?

Can You Still Drive with Brake System Failure?

What's the difference between Continental MC5 and MC6?

Is it biennial inspection after 6-year exemption?

Is Front-Wheel Drive or Rear-Wheel Drive Faster in a Straight-Line Acceleration?

Should the Great Wall C30 use 5w30 or 40?

What is the fuel consumption of the Cruze?

What is the maintenance interval for the Volkswagen Golf?

Is the Great Wall Pao 4WD?

Is the Changan EADO equipped with a dual-clutch transmission?