Is the Three-Way Catalytic Cleaner Useful?

1 Answers
McCamille
07/24/25 10:51pm
Three-way catalytic cleaner is useful. The three-way catalytic cleaner is a transparent liquid used to clean the surface complexes of the three-way catalytic converter in motor vehicles. Below is an introduction to the cleaning steps of the three-way catalytic cleaner: 1. Start the vehicle for preheating and connect the hanging tube to the three-way catalytic cleaner. 2. Insert the device into the vacuum tube connected to the engine. 3. Start the engine, open the device control valve, and allow the three-way catalytic cleaner to drip in the viewing window. 4. Keep the engine idling until the cleaner is completely dripped. 5. After cleaning, turn off the engine and reconnect the pipelines. 6. Let the engine idle to discharge any remaining liquid.
Was this review help?
13
2
Share
More Forum Discussions

Will using 95-octane gasoline in a Corolla cause severe carbon buildup?

Using 95-octane gasoline in a Corolla will not cause severe carbon buildup. More relevant information is as follows: 1. Carbon deposition is mainly influenced by the fuel injection system and oil products. The difference between 92-octane and 95-octane gasoline lies only in their octane ratings and anti-knock capabilities. In principle, the impurity levels are the same, so gasoline will not increase. 95-octane gasoline is not more prone to carbon buildup. 2. The vehicle is equipped with CVVT variable valve timing, which automatically controls the fuel injection amount based on throttle and load conditions. Using 95-octane gasoline does not generate more power. 3. The root cause of engine carbon buildup is incomplete combustion of gasoline, which is not necessarily related to the octane rating but has some connection to oil quality. Moreover, blindly using higher-octane gasoline can actually lead to more carbon buildup. 4. Octane rating is linked to engine compression. High-compression engines require higher-octane gasoline, while low-compression engines need lower-octane gasoline to achieve maximum efficiency (except for turbocharged engines).
10
2
Share

How to turn on the ambient lights in Changan CS75?

Changan CS75 ambient light usage instructions are as follows: 1. Click on the vehicle settings on the multimedia display screen, enter the lighting settings interface to adjust and use. 2. Ambient lights are a new type of interior decorative lighting, and car owners can manually adjust or automatically cycle through colors according to their preferences. Ambient lights enhance the interior effect of the car. 3. The Changan CS75 is a compact SUV equipped with a 6-speed manual transmission, with a maximum power of 131 kW and a maximum torque of 265 Nm. Its body dimensions are 4650mm in length, 1850mm in width, and 1715mm in height, with a wheelbase of 2700mm.
10
0
Share

Do automatic transmission cars have cruise control?

Automatic transmission cars do have cruise control. Relevant information is as follows: 1. Cruise control is used to maintain a constant speed for the vehicle. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer, which continuously adjusts the fuel supply based on road conditions and driving resistance to keep the car at the set speed without throttle operation, reducing driver fatigue and unnecessary speed variations, thereby saving fuel. Generally, cruise control is automatically deactivated when the driver presses the brake pedal or clutch. 2. The cruise control area is usually located behind the steering wheel or integrated into the multifunction steering wheel. 3. Cruise control is suitable for use on highways or fully enclosed roads but is prohibited in rainy or icy/snowy conditions. It should also be disabled on winding mountain roads or roads with excessive curves.
10
4
Share

How to Open the Forester Hood?

Forester hood opening method is as follows: 1. Below the left side of the steering wheel, about 10 centimeters down from the VDC button, pull outward. 2. The hood will pop up, then manually reach to the middle of the hood (a small metal handle), press to the left, and it will open. The hood is made of rubber foam and aluminum foil materials, which can reduce engine noise while isolating the heat generated during engine operation, effectively protecting the paint on the hood surface and preventing aging. The engine operates in a high-temperature, high-pressure, flammable environment, and there is a risk of explosion, combustion, or leakage due to overheating or accidental damage to components. The hood can effectively block injuries caused by explosions, acting as a protective shield.
14
0
Share

How to Set the Seat Memory in Explorer?

Explorer seat memory setting method is as follows: 1. With the vehicle parked and in P gear, press the START ignition button. 2. Adjust the seat, steering wheel, and rearview mirrors. The seat memory function refers to integrating the car seat with the vehicle's onboard computer to add memory capability. When one driver has adjusted the seat position, the next driver can press a button to recall previously stored seat parameter settings for comfortable driving. A car's seat memory function can typically store 2 to 4 memory presets. 3. Press the SET button, then within 5 seconds press and hold a memory button (1 or 2) for at least 1 second. The memory indicator light will remain illuminated for 5 seconds to confirm successful setting.
9
0
Share

Where is the OBD interface located on the BMW 3 Series?

Near the driver's footwell. Extend your head to the clutch pedal position, look upwards while using a flashlight, and you'll find an interface - that's the OBD port. Additional relevant information is as follows: 1. OBD stands for "On-Board Diagnostics" in Chinese. This system continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. When it detects conditions that might cause excessive emissions, it immediately issues a warning. When a system malfunction occurs, the malfunction indicator lamp or check engine warning light illuminates, while the OBD system stores the fault information in memory. Standard diagnostic tools can read this information through the diagnostic interface in the form of fault codes. Based on these fault codes, maintenance personnel can quickly and accurately determine the nature and location of the fault. 2. As the communication interface for the vehicle monitoring system, the OBD port's primary function goes beyond just reading fault codes for repairs. It can provide various operational data about the vehicle. While the dashboard displays some data, the vehicle's computer actually records much more information - including for vehicles without an onboard computer display. Data such as fuel consumption records, battery voltage, air-fuel ratio, throttle opening degree, and knock count are all recorded in the system. However, manufacturers may omit the onboard computer display in lower-end models due to cost considerations, preventing users from accessing this useful data. This has led to the emergence of specialized aftermarket onboard computer display products in the market.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.