···
Log in / Register

Is the Subject 2 Driving Test Easy to Pass?

3 Answers
SadieLynn
07/30/25 12:58am
As long as you can flexibly use the clutch, control the speed well, remember the procedures, and stay relaxed, you can basically pass. Reasons why the Subject 2 test is difficult: Nervousness: Many people feel nervous during the test, which is a common issue. Life is full of various tests, so there's no need to put too much pressure on yourself. If you fail, you can always try again. Only by relaxing can you perform better. Carelessness: Many people rush through the process, leading to mistakes like forgetting to signal or fasten the seatbelt. Excessive speed: For beginners, driving too fast during the test is a major reason for failure. High speed makes it harder to react promptly to errors. Unfamiliarity with the test site: For first-time test-takers, there are often differences between the practice area and the test site. Therefore, it's important to communicate with the instructor, understand these differences, and strengthen simulation exercises.
Was this review help?
14
4
Share
VonEmilia
08/15/25 6:26am
When I first signed up for the driver's license test, I was particularly nervous about Subject 2, especially the hill start where I kept stalling, making me doubt if it was even passable. After practicing continuously for half a month, spending every day at the driving school working on reverse parking and parallel parking, I gradually picked up some tricks: like not just relying on the rearview mirror when reversing, but also checking the distance through the back window; or lightly pressing the brake before starting on a slope to avoid rolling back. With more practice, I realized how crucial mindset is. On the test day, I took a few deep breaths, followed each step carefully, and passed smoothly. In reality, the difficulty depends on practice time and habit formation. Beginners shouldn’t be afraid—keep grinding, and there’s always a turnaround. Many fail because they rush and overlook details like signaling or pulling the handbrake. I recommend asking instructors for advice or watching tutorial videos online, learning from mistakes, and persisting until you pass.
Was this review help?
8
0
Share
Expand All
LaPenelope
10/20/25 4:26am
Years of teaching experience have revealed that the pass rate for Subject 2 (parking tests) isn't simple, as many underestimate the importance of honing fundamental skills. Turning the steering wheel too early during reverse parking causes wheel marking violations, while doing it too late leads to hitting poles. Even minor positional deviations during parallel parking result in failure. Practice methodology is crucial: first familiarize yourself with seat adjustments and steering wheel sensitivity, memorize every reference point like marking line positions through repetitive drills to develop muscle memory. Psychological preparation is indispensable - students often underperform due to nervousness; we recommend simulated test environment practices beforehand and treating examiners as regular instructors. The overall pass rate hovers around 60-70%, but with dedicated one-hour daily practice for 2-3 weeks, most candidates succeed. Safe driving remains the exam's core purpose; mastering these skills demonstrates responsibility to oneself and others. Rather than obsessing over outcomes, valuing the skill-acquisition journey proves more meaningful.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the method to start the Audi Q3?

Audi Q3 starting method is: 1. Press the brake and push the one-button start; 2. Slowly release the brake and press the accelerator. Taking the 2021 Audi Q3 as an example, it belongs to the compact SUV category, with body dimensions of: length 4495mm, width 1848mm, height 1616mm, wheelbase 2680mm, fuel tank capacity 60l, and trunk capacity 450l. The 2021 Audi Q3 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 250nm, matched with a 7-speed dual-clutch transmission.
11
4
Share

Can You Pour Water on Overheated Brake Pads?

You should not pour water on overheated brake pads as it will accelerate their wear. The replacement method is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Unscrew the bolts of the brake caliper and take off the brake pads; 4. Install new brake pads, tighten the guide bolts, and complete the replacement. The function of brakes is to reduce speed or stop the vehicle. Their working principle is to convert the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and brake drum, as well as between the tires and the ground, thereby slowing down or stopping the vehicle.
18
3
Share

Which car brand uses the 'Song' character as its logo?

The 'Song' character logo represents BYD brand vehicles, which include models such as BYD Qin, BYD Han, BYD Tang, BYD Yuan, and BYD M6, among others. Taking the 2021 BYD Song as an example, it belongs to the compact SUV category with body dimensions of: length 4600mm, width 1830mm, height 1700mm, a wheelbase of 2660mm, a fuel tank capacity of 63 liters, and a curb weight of 1630kg. The 2021 BYD Song is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 160PS, a maximum power of 118kW, and a maximum torque of 245Nm, paired with a 6-speed manual transmission.
10
3
Share

What are the causes of throttle vibration during acceleration?

The causes of throttle vibration during acceleration are: 1. Large electrode gap in the spark plug; 2. Faulty ignition coil; 3. Loose screws on the engine underguard; 4. Excessive carbon buildup in the engine, throttle, intake tract, or valve areas; 5. Poor quality gasoline. The solutions for throttle vibration during acceleration are: 1. Adjust the spark plug electrode gap or replace the spark plug; 2. Check fuel pressure and clean the fuel injector; 3. Test cylinder pressure; 4. Clean the throttle, fuel filter, and fuel lines; 5. Service and maintain the engine; 6. Check the coolant temperature sensor; 7. Replace with suitable engine oil.
4
5
Share

What is the fuel tank capacity of the Wuling Hongguang S1.2?

The 2021 Wuling Hongguang S1.5 has a total of 10 models, all with a fuel tank capacity of 50 liters. The entire series is equipped with LSI engines and a 5-speed manual transmission (MT), with all models featuring a front-engine, rear-wheel-drive configuration. Among vehicles in the same class, the 2018 Foton Gratour ix5 1.2L Utility G03 has a fuel tank capacity of 50 liters, while the 2021 Wuling Hongguang V 1.5L Power Edition LAR has a fuel tank capacity of 45 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.
8
2
Share

Does the Lynk & Co automatically lock when the driver leaves?

Lynk & Co vehicles can automatically lock when the driver leaves. Here's how to activate the auto-lock function: 1. Shift to P position; 2. Turn ignition to ON position with all doors closed; 3. Press the lock button; 4. Observe the hazard lights flashing twice on the instrument panel; 5. Auto-lock function activation is complete. Taking the 2021 Lynk & Co 03 as an example, it belongs to the compact car category with body dimensions of 4639mm in length, 1840mm in width, 1472mm in height, and a wheelbase of 2730mm. The 2021 Lynk & Co 03 is equipped with a 1.5T turbocharged engine delivering 156PS maximum horsepower, 115kW maximum power, and 245Nm maximum torque, paired with a 6-speed manual transmission.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.