···
Log in / Register

Is the Right Hand the Front Brake on a Motorcycle?

1 Answers
Ribeiro
07/29/25 4:21pm
Motorcycle right hand is the front brake. Here is some related knowledge about motorcycle brakes: Scooter brakes: The front brake of a scooter is always on the right side and operated by the right hand. However, the rear brake comes in two types: one is a hand brake, controlled by the left hand, similar to bicycles—left for rear, right for front. The other type is a foot brake, operated by the right foot on the pedal. Motorcycle rear wheel braking: When a motorcycle decelerates, the adhesion of the rear wheel decreases accordingly. In such cases, braking still relies on the rear wheel. However, the desired braking effect may vary, and improper operation can cause the rear tire to lock up and skid, which requires attention.
Was this review help?
1
3
Share
More Forum Discussions

Who is responsible for compensating when a student damages the exam vehicle during a test?

When students are learning to drive or taking exams at a driving school, the driving school and the testing site have the obligation to ensure the personal safety of the students during their learning and testing. In the event of such an accident, the driving school or testing site not only bears full responsibility but should also apologize to the student. Relevant information is as follows: Complaint: If the driving school or testing site demands the student to take responsibility, the student can file a complaint with the transportation authority, the Traffic Transport Administration Bureau, at the complaint hotline 12328. Alternatively, they can complain to the Discipline Inspection Commission of the Public Security Bureau. Relevant regulations: According to the "Road Traffic Safety Law Implementation Regulations," if a driving school student is driving on the road during the learning period, it should be done under the guidance of an accompanying instructor. If the student commits any road traffic safety violations or causes a traffic accident during the learning process, the instructor is responsible. However, during the driver's license exam, if the exam vehicle has no issues and there is no instructor accompanying the vehicle, the student should bear corresponding responsibility after an accident occurs.
11
0
Share

Is Rear Quarter Panel Cutting Considered a Major Accident?

Cutting the rear quarter panel of a car classifies it as an accident vehicle, but it does not qualify as a major accident. Here are the relevant details: Quarter Panel Overview: The quarter panel, also known as the fender, is the exterior body panel that covers the wheel. Based on installation position, it is divided into front quarter panel and rear quarter panel. Its function is to utilize fluid dynamics to reduce the drag coefficient, ensuring smoother vehicle operation. The front quarter panel is installed at the front wheel area. Since front wheels have steering functionality, it must ensure maximum clearance during wheel rotation. Therefore, designers use wheel travel diagrams to validate the panel's dimensions based on the selected tire model size. The rear quarter panel doesn't face wheel rotation interference issues, but for aerodynamic considerations, it features a slightly arched outward curve. Accident Vehicle Definition: An accident vehicle refers to cars that have undergone severe collisions, flooding, fire damage, etc., and still pose safety risks even after repairs—such vehicles are collectively termed accident vehicles. Accident Vehicle Characteristics: When a vehicle experiences collisions or damage affecting structural components like frame rails or chassis, requiring cutting or welding for restoration.
19
3
Share

After how many working hours should the first-level maintenance of field vehicles be performed?

The "Review Textbook for Operators of Specialized Internal Vehicles" mentions that the first-level maintenance of field vehicles should be performed after 250 working hours. Below is the relevant introduction: Concept of first-level maintenance of equipment: Mainly performed by operators with the assistance of maintenance workers, this maintenance is scheduled every two months of operation (for two-shift systems) or as planned. The maintenance duration is generally 4 to 8 hours. Scope and content of first-level maintenance of equipment: Based on the usage of the equipment, partial disassembly, cleaning, and repair of components are carried out. Proper adjustments are made to the fitting clearances of various parts of the equipment. Cleaning of felt, yarn, and oil filters; clearing of oil passages and pipelines, replenishing lubricating oil and grease, and making up for any deficiencies to ensure no yellowing. All operating mechanisms, various stops, limit switches, etc., are adjusted to be sensitive and reliable, and all dust and chip prevention devices are cleaned and repaired to be fully functional.
1
2
Share

Will it be a problem if the sunroof is not fully closed during rain?

Yes, it will cause problems. It can lead to moisture inside the car, making the interior upholstery prone to mold, and leather seats susceptible to damage. The details are as follows: Drainage holes may get clogged: The sunroof is surrounded by sliding rails and drainage channels, but over time, dirt such as leaves, dust, and mud can accumulate. If these contaminants are not cleaned promptly, rainwater entering through an open sunroof can block the drainage holes at the four corners of the sunroof frame. If the rainwater is not drained in time, it may overflow and soak the interior trim panels around the sunroof or the sunroof switch. Water leakage inside the car: The drainage pipes are hidden in the A, C, or D pillars of the car and are responsible for draining water from the drainage holes to the outside. If the connection between the pipes and the drainage holes becomes loose, the pipes themselves crack or develop leaks, or the pipes are bent too sharply, or the pipes age, it can lead to water leakage. This typically manifests as seepage or leakage near the A-pillar to the door area or behind the rear seats to the trunk. Internal component failure: If the sunroof is left open during rain and water enters the car, it can wet internal components, leading to short circuits in the wiring. If the vehicle is started while the rainwater is still wet, it may fail to start.
17
2
Share

What are the requirements for vehicle registration in Ningbo?

Purchase insurance and pay taxes, then go to the vehicle management office to register the license plate after obtaining the vehicle tax payment certificate. The specific requirements are as follows: Identity proof: The identity proof of the vehicle owner. Proof of origin: Proof of the vehicle's origin such as the purchase invoice. Materials such as vehicle purchase tax payment or exemption certificate: Complete vehicle factory qualification certificate or import certificate for imported vehicles; Vehicle purchase tax payment certificate or exemption certificate; Compulsory traffic accident liability insurance certificate for motor vehicles; Vehicle and vessel tax payment or exemption certificate; Other proofs and certificates that should be submitted during vehicle registration as stipulated by laws and administrative regulations.
10
2
Share

What Causes the Spare Car Key Remote to Stop Responding?

There are two possible reasons why the spare car key remote stops responding: the car battery is low on power, or the key itself has run out of battery. First, check whether the indicator light on the remote flashes when you press the unlock button. If it doesn't flash, the issue lies with the remote itself. There are three main categories of remote keys: Active working mode: This method relies on the vehicle's electronic control module (ECM) and body control module (BCM) to operate the doors. Simply pressing the key button sends an unlock/lock command, which, after verification by the ECM, opens or closes the doors. Coil induction: This primarily involves embedding an encrypted chip inside the key. During the unlocking process, the vehicle's RF transceiver verifies whether the key matches to determine if the engine can be started. This is mainly used in special cases where the key has no battery but the car can still start normally. Passive working mode: When the owner enters the sensing range of the key system, simply touching the door handle triggers the identity-recognition "key" to receive a low-frequency signal from the car. If this signal matches the stored identity information in the "key," the "key" is activated. Once awakened, the "key" analyzes the authentication command sent by the car and transmits a corresponding encrypted signal to enhance security.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.